Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

Computational study of aza-adamantanes as multivalent bases

Structure and bonding characteristics, and gas phase stepwise basicities of proposed multivalent bases 1,3,5,7-tetraazatricyclo[3.3.1.1(3,7)]decane, 1,3,5,7,9,10-hexaazatricyclo[3.3.1.1(3,7)]decane and tricyclo[3.3.1.1(3,7)]azadecane, named and abbreviated here respectively as tetra-aza-adamantane (TAA), hexa-aza-adamantane (HAA) and deca-aza-adamantane (DAA), have been studied using B3LYP/6-311++G** method. Effects of protonation on the bond lengths and angles, and atomic charges, and on their correlations are studied in detail. Results show that the most affected characteristics by protonation are the N–H bond lengths and the charge of the hydrogen atoms. It is found, interestingly, that in the protonation of DAA, electric charges of the unprotonated nitrogen atoms are increased more than that of the protonated nitrogen atoms. Because of very small effects of protonation on the skeletal C–N and N–N bond lengths, it can be said that the aza-adamantane cage volume is not changed significantly upon protonation. The protonation energies approve multivalent nature of these bases with the order of TAA ≈ HAA > DAA. Different isomers for the unprotonated and protonated HAA and DAA are also studied.     

The quantum chemical calculation of NMR two-bond spin–spin coupling constants in the N?···H–OH?→?N–H···OH? switching

A quantum chemical study has been carried out to investigate the effects of the size of H₂O cluster and substituents (X = H, Me, OMe, CHO, NO, and NO₂) in the para position of the anilide ion on the two-bond spin–spin coupling constants (SSCCs) ^2h J _N···O across in the N–H–O switching at B3LYP/6-311 ++G(2d,2p) level of theory. The changes in ^2h J _N···O SSCCs due to variation of substituent and H₂O cluster size were well monitored by changes in binding energy, structural parameter, electron density topography, natural charge, charge transfer, and percentage of p-character of N atom in the C–N bond. Linear correlations were found between ^2h J _N···O and above-mentioned properties.     

Green Oxidations. Manganese(II) Sulfate Aided Oxidations of Organic Compounds by Potassium Permanganate

Summary. The oxidation of arenes and sulfides by potassium permanganate was accomplished in good yields under solvent free and heterogeneous conditions when manganese(II) sulfate is used as a solid support. After extraction of the organic products, the inorganic products can be reoxidized to permanganate. This result is important because it provides an approach to oxidation reactions that is, in theory, infinitely sustainable.     

Local Clique Covering of Claw‐Free Graphs

A clique covering of a simple graph G is a collection of cliques of G covering all the edges of G such that each vertex is contained in at most k cliques. The smallest k for which G admits a clique covering is called the local clique cover number of G and is denoted by lcc(G). Local clique cover number can be viewed as the local counterpart of the clique cover number that is equal to the minimum total number of cliques covering all edges. In this article, several aspects of the local clique covering problem are studied and its relationships to other well‐known problems are discussed. In particular, it is proved that the local clique cover number of every claw‐free graph is at most , where Δ is the maximum degree of the graph and c is a constant. It is also shown that the bound is tight, up to a constant factor. Moreover, regarding a conjecture by Chen et al. (Clique covering the edges of a locally cobipartite graph, Discrete Math 219(1–3)(2000), 17–26), we prove that the clique cover number of every connected claw‐free graph on n vertices with the minimum degree δ, is at most , where c is a constant.     

Detection of bone metastases using diffusion weighted magnetic resonance imaging: comparison with C-methionine PET and bone scintigraphy

Purpose

We evaluated the ability of diffusion-weighted imaging (DWI) to detect bone metastasis by comparing the results obtained using this modality with those obtained using ¹¹C-methionine (MET) positron emission tomography (PET) and bone scintigraphy.

Materials and methods

This retrospective study involved 29 patients with bone metastasis. DWI was obtained using a single-shot echo planar imaging (EPI) sequence with fat suppression using a short inversion time inversion recovery sequence. The detection capabilities of DWI for bone metastases were compared with those of whole body MET PET (in 19 patients) and 99mTc-methylene diphosphonate bone scintigraphy (in 15 patients).

Results

Among the 19 patients who were diagnosed using DWI and PET, the PET identified 39 bone metastases, while the DWI identified 60 metastases out of 69 metastases revealed with conventional magnetic resonance imaging (MRI). Among the 15 patients who were diagnosed using DWI and bone scintigraphy, the bone scintigraphy identified 18 bone metastases, while the DWI identified 72 metastases out of 78 metastases revealed with conventional MRI. The overall bone metastasis detection rates were 56.5% for PET, 23.1% for bone scintigraphy and 92.3% for DWI.

Conclusion

DWI is a very sensitive method for detecting bone metastasis and is superior to MET PET and bone scintigraphy in terms of its detection capabilities.     

Electrodeposition of Ag nanoparticles on graphenized pencil lead electrode as a sensitive and low-cost sensor for iodate determination

In this study, a simple, sensitive and low-cost iodate electrochemical sensor based on graphenized pencil lead electrode (GPLE) modified with Ag nanoparticles (AgNPs) was presented. The GPLE was simply prepared via electrochemical exfoliation of pencil lead electrode (PLE) by applying an optimized potential in acidic media. Afterward, silver nanoparticles were electrochemically deposited on the surface of GPLE using chronoamperometry technique. The fabricated electrode was carefully characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) techniques. Electrochemical behavior and also the electrocatalytic performance of the modified electrode toward the reduction of iodate were studied in details using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The fabricated sensor responds efficiently to iodate over the concentration range of 0.05 to 75 mM with a detection limit of 0.017 mM and sensitivity of 0.26 µA µM^?1 cm^?2. Remarkably enhanced electrocatalytic performance of the modified electrode was ascribed to the synergistic effect of graphene-like nanostructures with high surface to volume ratio, excellent conductivity and also the excessive electrocatalytic behavior of silver nanoparticles. The modified electrode was successfully employed for the determination of iodate in table and sea salt samples.     

The Reaction of N-Isocyaniminotriphenylphosphorane With Biacetyl in the Presence of (E)-Cinnamic Acids: Synthesis of Fully Substituted 1,3,4-Oxadiazole Derivatives via Intramolecular AZA-Wittig Reactions of in Situ Generated Iminophosphoranes

Abstract

Reaction of N-isocyaniminotriphenylphosphorane with biacetyl in the presence of (E)-cinnamic acids proceeds smoothly at room temperature and under neutral conditions to afford sterically congested 1,3,4-oxadiazole derivatives in high yields. The reaction proceeds smoothly and straightforward under mild conditions and no side reactions are observed.     

Carbon Quantum Dots Co‐catalyzed with ZnO Nanoflowers and Poly (CTAB) Nanosensor for Simultaneous Sensitive Detection of Paracetamol and Ciprofloxacin in Biological Samples

A novel platform based incorporation of carbon quantum dots (CQDs) and zinc oxide nanoflowers (ZnO‐NFs) decorated with poly cetyltrimethylammonium bromide (CTAB) was developed as electrochemical sensor for the sensitive and selective simultaneous detection of Paracetamol (PAR) and Ciprofloxacin (CIP) in biological samples. For this, CQDs and ZnO‐NFs were first deposited on a glassy carbon electrode (GCE) and subsequently a Poly (CTAB) layer was grown onto their surfaces through electro‐polymerization. The synthesized nanostructures and the corresponding fabricated sensor were characterized by the techniques of TEM, XRD, FE‐SEM, and EDX analysis. Moreover electrochemical characterization by CV and DPV were performed to elucidate the construction process and electron transfer abilities of the CQDs/ZnO‐NFs/Poly(CTAB)/GCE. Increased sensitivity and efficiency of this sensing system was obtained due to the synergistic effects of CQDs, ZnO‐NFs and Poly (CTAB) with multi‐signal amplification. Under the optimum conditions, the DPV response of proposed sensor to PAR and CIP was linear at 0.05–30.0 μM and 0.01–30.0 μM, with the detection limit of 2.47 nM and 1.97 nM respectively. The sensor possessed high stability, reproducibility, sensitivity, and selectivity toward PAR and CIP detection, over potential interferents and presented high recovery percentage in the real sample matrices.