Nil-Armendariz Rings Relative to a Monoid

For a monoid M, we introduce nil-Armendariz rings relative to M, which are a generalization of nil-Armendariz and M-Armendariz rings, and investigate their properties. First we show that semicommutative rings are nil-Armendariz relative to every unique product monoid M. Also it is shown that for a strictly totally ordered monoid M and an ideal I of R, if I is a semicommutative subrng of R and R/I nil-Armendariz relative to M, then R is nil-Armendariz relative to M. Then we show that if R is a semicommutative ring and nil-Armendariz relative to M, then R is nil-Armendariz relative to M × N, where N is a unique product monoid. As corollaries we obtain some results of [2] and [10].     

Evaluating policies based on their long term average cost

Many decision problems can be characterized by a set of possible states and a cost associated with each possible state transition, hi this paper we discuss how to select a policy from a set of possible policies in the long term. If the cost matrix is not available the transition matrix can be used to compare expected return times to states. In our setting the transition matrix is defined by use of linguistic terms and as a consequence, the expected return times are fuzzy. In the case where the cost matrix is available, fuzzy average costs are computed. The resulting fuzzy quantities are compared by introducing the concept of minimizing sets. Finally, we look at the case where the transition takes place from a state to a state that is known to be an element of some subset of states, but we do not know which one. We use the Dempster–Shafer theory [Shafer 1976] together with techniques of Norton [Norton 1988] and Smetz [Smetz 1976] to approximate the transition probabilities     

Laser surface alloying of an electroless Ni–P coating with Al-356 substrate

Laser surface alloying of an electroless plating Ni–P coatings on an Al-356 aluminium alloy was carried out using a 1-kW pulsed Nd:YAG laser. The microstructure, chemical composition and phase identification of the alloyed layer were determined using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffractometry (XRD), respectively. It was shown that laser surface treatment produced a relatively smooth, crack-free and hard surface layer. The hardness of the surface significantly increased due to the formation of the uniformly distributed fine Ni–Al intermetallic phases. The corrosion behaviour of the surface alloyed specimens in 3.5% NaCl solution at 23 °C was also determined by electrochemical techniques. The laser-alloyed surface showed an improved corrosion and pitting potential compared to the substrate as well as the plated Ni–P coating.     

Magnetic losses of the soft magnetic composites consisting of iron and Ni–Zn ferrite

Ferromagnetic powders which are surrounded by an electrically insulating film (soft magnetic composites (SMCs)) exhibit unique magnetic properties, such as relatively low magnetic losses and 3D isotropic magnetic behavior. In some electromagnetic applications, including microwave frequency range applications, it is necessary to increase electrical resistivity without any noticeable reduction in magnetic properties. To achieve this purpose, electrically resistant materials, for example, ferrites with acceptable magnetic properties, are suitable candidates. This paper focuses on the effects of the synthesized Ni–Zn ferrite addition on the magnetic properties of the SMCs containing Ni–Zn ferrite within iron particles. The structure was studied by means of X-ray diffraction (XRD). The microstructure and the powder morphology were examined by the use of scanning electron microscopy (SEM). The magnetic measurements on powders and samples were carried out using a vibrating sample magnetometer (VSM) and an LCR meter, respectively. The results indicate that the lowest magnetic loss and the highest magnetic permeability are related to the composites with 20 wt% ferrite and 2 wt% ferrite, respectively. Also, the composites with 10 wt% ferrite show a good combination of magnetic loss and magnetic permeability in the range 0–500 kHz.     

Experimental and theoretical investigation of CO2 and air bubble rising velocity through kerosene and distilled water in bubble column

This paper concerns with developing of parameters which influence terminal velocities of air and CO₂ bubbles in distilled water and kerosene pools. The objective of this study is to validate and correct the formulas that were developed by previous investigators for prediction of terminal velocities. The investigation revealed that the terminal velocity of a single rigid spherical bubble in Newtonian fluids can be developed by balancing of mechanical forces acting on the bubble. However, for large bubbles, because of deforming of the bubble which is a result of interfacial tension, the effect of surface tension should be considered in the terminal velocity prediction formula. By using PSO algorithm and plotting experimental data of terminal velocity against the size of gas bubbles, the suitable equation for each of systems was chosen. Results showed that Jamialahmadi model is more practical for terminal velocity prediction. Jamialahmadi model requires a modification to be utilized for air-kerosene, CO₂-kerosene, air- distilled water and CO₂-distilled water systems. The developed PSO algorithm model is accurate for prediction of experimental data with an average R² value of 0.9722.     

Palladium nanoparticles immobilized over Strawberry fruit extract coated Fe3O4 NPs: A magnetic reusable nanocatalyst for Suzuki-Miyaura coupling reactions

This paper develops a green method for in situ decorated of palladium nanoparticles over Fe₃O₄ nanoparticles, by utilizing Strawberry fruit extract and ultrasound irradiations, with no use of any toxic reducing agent. The structure's characterization is represented via diverse analytical methods such as FT-IR, FE-SEM, TEM, WDX, ICP, EDS and XXPS. Catalytic efficiency of magnetic Fe₃O₄@Strawberry/Pd nanocatalyst is investigated in production of different biphenyls with good turnover frequencies (TOF) and turnover numbers (TON) through Suzuki coupling reactions. Furthermore, the catalyst could be recovered and reused 7 runs without considerable palladium leaching or alteration in its performance.