Structure and Bonding in CE5− (E=Al–Tl) Clusters: Planar Tetracoordinate Carbon versus Pentacoordinate Carbon

The structure, bonding, and stability of clusters with the empirical formula CE₅^? (E=Al–Tl) have been analyzed by means of high‐level computations. The results indicate that, whereas aluminum and gallium clusters have C_2v structures with a planar tetracoordinate carbon (ptC), their heavier homologues prefer three‐dimensional C_4v forms with a pentacoordinate carbon center over the ptC one. The reason for such a preference is a delicate balance between the interaction energy of the fifth E atom with CE₄ and the distortion energy. Moreover, bonding analysis shows that the ptC systems can be better described as CE₄^?, with 17‐valence electrons interacting with E. The ptC core in these systems exhibits double aromatic (both σ and π) behavior, but the σ contribution is dominating.     

Solid-phase extraction of soy isoflavones

An automated method using solid-phase extraction (SPE) for the concentration and clean-up of soy isoflavone extracts is proposed in this work. Using a standardized sample (0.1 g of a freeze dried soybean extract/25 mL of water); eight SPE cartridges with a wide range of sorbents (C18, divinylbenzene and modified divinylbenzene) from different suppliers were evaluated and compared. A large variation on SPE cartridges performance was observed, especially regarding retention and breakthrough volume of isoflavones during sample load and washing steps. The most effective cartridges were the divinylbenzene based cartridges, especially Strata X (from Phenomenex) and HLB oasis (from Waters). Using Strata X cartridges, several extraction parameters, such as sample loading flow (5-15 mL min(-1)), extracting solvent volume (2-6 mL of methanol), pH of the extracting solvent and the necessity of drying the sorbent before elution, were evaluated to provide a fast, specific, quantitative and reproducible SPE method. The optimized method consists of conditioning the cartridge with 10 mL of methanol and 10 mL of water (10 mL min(-1)), loading 25 mL of the standardized extract onto the cartridges (5 mL min(-1)), washing the cartridge with 10 mL of water (10 mL min(-1)) and finally eluting with 4 mL of methanol (10 mL min(-1)). Mean isoflavones recovery was 99.37% and mean intra- and inter-day reproducibility was higher than 98%. The developed sample clean-up/concentration (6.25:1) method takes less than 10 min and can be used in the analysis of isoflavones from soy extracts.     

Crystallization of Co75-xFexGe15B10 amorphous alloys

The crystallization behavior of Co_75-xFe_xGe₁₅B₁₀ (x=3.0, 4.6 and 6.0) amorphous alloys was monitored by differential thermal analysis and thermo-mechanical analysis. The crystallization process of the melt spun ribbons was interrupted at 450, 525, 650, 800 and 900°C and their microstructures were investigated by X-ray diffractometry. It was observed that the crystallization occurs in a sequential mode attributed to the formation of different types of precipitates. It was shown that the crystallization products change as a function of Fe content. After full crystallization, GeFe, Co₃B, FeGe₂ and Co₂Ge compounds were found as well as a Co rich solid solution. This revised version was published online in August 2006 with corrections to the Cover Date.     

Comparative analysis of volatile compounds of ‘fino’ sherry wine by rotatory and continuous liquid-liquid extraction and solid-phase microextraction in conjunction with gas chromatography-mass spectrometry

Different headspace solid-phase microextraction (HS-SPME) methods have been selected and applied to the analysis of volatile compounds in ‘fino’ sherry wine by gas chromatography-mass spectrometry. A method based on rotary and continuous liquid-liquid extraction (LLE) for analysis of these same compounds has been optimised. The best conditions to extract this type of compounds using SPME and LLE were determined and both methods were validated. Both methodologies show adequate detection and quantitation limits, and linear ranges for correctly analysing these compounds. The recoveries obtained were close to 100%, with good repeatability values. The analytical and procedural advantages and disadvantages of these two methods have been compared. In general, SPME presented higher sensitivities. Both analytical methods were used to analyse five samples of ‘fino’ sherry wine supplied by different producers. No significant differences were found between the techniques at a significance level of 5%. The regression coefficients (r²) for analysis using LLE and SPME exceeded 0.94 for all compounds. The LLE procedure is a method with high repeatability and has the possibility of simultaneous extraction of several samples (up to 12), however the SPME technique is a solvent-free method presenting major advantages, such as small sample volume and higher sensitivity and simplicity.     

Gamma radiation effects on molecular characteristic of vegetable tannins

The influence of gamma radiation on tannins extracted from Pinus caribaea bark and on tannin acid has been investigated in this study with the aim of searching for evidences of structural and/or conformational changes. To fulfill this purpose, the samples of tannins, such as tannic acid and P. caribaea tannin bark, were irradiated at different doses (from 5 to 35 kGy) using a cobalt-60 gamma irradiator. The changes were analyzed by a Fourier transform infrared spectrometry and by high resolution liquid chromatography. The results pointed out some structural and conformational changes under the effects of gamma radiation for doses higher than 5 kGy for P. caribaea tannin bark. However, no changes were detected on the irradiated tannic acid. The observed behavior suggests the loss of carbonyl groups. This could be associated to a decarboxylation process with the corresponding release of CO₂ from the molecule. Evidences of some conformational changes were also noted.     

XPS study of the surface properties and Ni particle size determination of Ni‐supported catalysts

The surface properties of Ni/MgAl₂O₄ catalysts doped with Ce or Pr were analyzed by XPS after treatment in an inert and reductive atmosphere at 400 °C. The Ce‐promoted solids presented the Ce³⁺/Ce⁴⁺ couple on the surface even after treatment in a reductive atmosphere, H₂(5%)/Ar. The promotion effect of Ce on these solids could be associated with their participation on the carbon deposition‐removal mechanism. Pr‐doped catalysts showed a very high concentration of Pr³⁺ under a reductive atmosphere and the redox behavior associated with the carbon removal could be partially inhibited or become slower. The size of the Ni⁰ particles after both an inert and a reductive atmosphere was estimated by XPS intensity ratio using the model proposed by Davis. The results obtained from the Davis model showed that an important increase occurred in Ni particle size after treatment in H₂(5%)/Ar for the Pr‐promoted solids. The metal sintering under reductive atmosphere could be the reason for the higher loss of activity of the Pr‐doped solids under reforming conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Rapid Determination of Simple Polyphenols in Grapes by LC Using a Monolithic Column

The development of a rapid, reliable and reproducible LC method for the determination and quantification of 13 polyphenols (gallic acid, protocatechuic aldehyde, gentisic acid, catechin, vanillinic acid, caffeic acid, vanillin, epicatechin, syringaldehyde, p-coumaric acid, ferulic acid, sinapic acid and resveratrol) in grapes and derived products is reported. The polyphenols were separated in less than 8 min. Employed was an RP-18e (100 mm × 4.6 mm) monolithic type column. A gradient method with the following solvents was utilised for the chromatographic separation: A: 90% water, 2% acetic acid in methanol, and B: 90% methanol, 2% acetic acid in water. Two detectors in series were employed: a UV–Vis detector and a fluorescence excitation/emission detector. Influence of temperature (15–40 °C) and solvent flow rate (2–5 mL min^?1) on the separation were studied, and 25 °C and 2.5 mL min^?1 were found to be the optimum conditions. The relative standard deviations of the resulting peak areas, for both intra- and inter- experiments, were less than 2.4 and 2.6%, respectively. Finally, the developed method has been utilised for the quantification of the polyphenols in real samples.     

Enrichment of the thymoquinone content in volatile oil from Satureja montana using supercritical fluid extraction

Supercritical fluid extraction (SFE) of the volatile oil from Satureja montana L. was performed under different conditions of pressure (90 and 100 bar), temperature (40 and 50°C), mean particle sizes (0.4, 0.6 and 0.8 mm) and CO₂ flow rate (0.8, 1.1 and 1.3 kg/h) to understand the influence of these parameters on the composition and yield of this oil. The results were compared with those obtained for the essential oil isolated by hydrodistillation (HD). The volatile and the essential oil were analysed by GC and GC‐MS. The main compounds are carvacrol (52.2–62.0% for HD vs. 41.7–64.5% for SFE), thymol (8.6–11.0% for HD vs. 6.0–11.3% for SFE), p‐cymene (6.9–12.8% for HD vs. 6.0–17.8% for SFE), γ‐terpinene (6.4–9.4% for HD vs. 2.3–6.0% for SFE) and β‐bisabolene (2.0–2.7% for HD vs. 2.2–3.5% for SFE). The major difference between SFE and HD was the relative amount of thymoquinone, an oxygenated monoterpene with important biological activities, which can be ten‐fold higher in volatile oil (1.6–3.0 for SFE vs. 0.2% for HD). The morphology of the glandular trichomes of S. montana and the effect of the grinding process on them was also evaluated by SEM.