Electrical Conductivity Measurement Through the Loaded Q Factor of a Resonant Cavity

We present a method for measuring the electrical conductivity of metallic materials that relies on the ratio of two loaded Q factors, Q_R/Q_X, with Q_R corresponding to a TE₀₁₁-mode reference cavity made of aluminum, and Q_X the Q that results upon replacing the aluminum plate with the one fabricated from the material to be examined. Electrical conductivity is mathematically inferred from the ratio Q_R/Q_X where the loaded Q factors are measured by using the transmission-type method. Within a 3.0 percent accuracy, conductivities determined at 8.7 GHz for electrolytic copper (5.6 times 10⁷ S/m) and brass (1.6 times 10⁷ S/m) show to be in good agreement with those reported in the literature.     

Direct selective and controlled protection of multiple hydroxyl groups in polyols via iterative regeneration of stannylene acetals

A direct selective protection (O-benzylation) of two or more hydroxyl groups in polyols displaying diverse structural patterns was made possible by the establishment of conditions that enable an efficient turnover for the Bu₂Sn group, initially at the corresponding stannylene acetals (only ∼1.0 mol equiv of Bu₂SnO was employed). It was also demonstrated that one might exert control over the number of protected groups, by means of appropriate tuning of reaction conditions. The feasibility of a substoichiometric (tin source) catalytic protocol was demonstrated as well.     

Purification and Characterization of a Mannose Recognition Lectin from <Emphasis Type="Italic">Oreochromis niloticus</Emphasis> (Tilapia Fish): Cytokine Production in Mice Splenocytes

The aim of this work was to purify and partially characterize a mannose recognition lectin from Nile tilapia (Oreochromis niloticus) serum, named OniL. OniL was isolated through precipitation with ammonium sulfate and affinity chromatography (Concanavalin A–Sepharose 4B). In addition, we evaluated carbohydrate specificity, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS–PAGE) profiles, and in vitro immunomodulatory activity on mice splenocyte experimental cultures through cytotoxic assays and cytokine production. The ammonium sulfate fraction F2 showed the highest specific hemagglutinating activity (331) and was applied to affinity matrix. Adsorbed proteins (OniL) were eluted with methyl-α-d-mannopyranoside. OniL, a 17-kDa protein by SDS–PAGE constituted by subunits of 11 and 6.6 kDa, showed highest affinity for methyl-α-d-mannopyranoside and d-mannose. Immunological assays, in vitro, showed that OniL did not show cytotoxicity against splenocytes, induced higher IFN-γ production and lower IL-10 as well as nitrite release. In conclusion, OniL lectin was successfully purified and showed a preferential Th1 response in mice splenocytes.     

Mixed-mode solid-phase extraction for sample cleanup in hair analysis for methadone and its main metabolite

A simple and rapid method for the determination of methadone and its main metabolite EDDP in hair has been developed and validated. The analytes were completely extracted from the matrix after a short alkaline incubation, and the extracts were further cleaned up by solid‐phase extraction using mixed‐mode cartridges. Linearity was obtained from 0.1 (lower limit of quantitation, LLOQ) to 30 ng/mg for both compounds, with correlation coefficients higher than 0.99. Intra‐ and interday precision and accuracy were in conformity with internationally accepted guidelines for bioanalytical method validation, and the cleanup procedure presented mean extraction efficiencies higher than 90% for both analytes. This high efficiency greatly contributed to the low limits of quantitation achieved, and therefore this method can be successfully applied in the determination of methadone and EDDP in hair samples in clinical and forensic scenarios where these compounds are involved. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of nitrotyrosine in Arabidopsis thaliana cell cultures with a mixed-mode solid-phase extraction cleanup followed by liquid chromatography time-of-flight mass spectrometry

In this work, a method for the determination of trace nitrotyrosine (NO₂Tyr) and tyrosine (Tyr) in Arabidopsis thaliana cell cultures is proposed. Due to the complexity of the resulting extracts after protein precipitation and enzymatic digestion and the strong electrospray signal suppression displayed in the detection of both Tyr and NO₂Tyr from raw A. thaliana cell culture extracts, a straightforward sample cleanup step was proposed. It was based on the use of mixed-mode solid-phase extraction (SPE) using MCX-type cartridges (Strata?-X-C), prior to identification and quantitation using fast liquid chromatography–electrospray time-of-flight mass spectrometry. Unambiguous confirmation of both amino acids was accomplished with accurate mass measurements (with errors lower than 2 ppm) of each protonated molecule along with a characteristic fragment ion for each species. Recovery studies were accomplished to evaluate the performance of the SPE sample preparation step obtaining average recoveries in the range 92–101 %. Limit of quantitation obtained for NO₂Tyr in A. thaliana extracts was 3 nmol L^?1. Finally, the proposed method was applied to evaluate stress conditions of the plant upon different concentrations of peroxynitrite, a protein-nitrating compound, which induces the nitration of Tyr at the nanomolar range. Detection and confirmation of the compounds demonstrated the usefulness of the proposed approach.

Extraction of volatile oil from aromatic plants with supercritical carbon dioxide: experiments and modeling

An overview of the studies carried out in our laboratories on supercritical fluid extraction (SFE) of volatile oils from seven aromatic plants: pennyroyal (Mentha pulegium L.), fennel seeds (Foeniculum vulgare Mill.), coriander (Coriandrum sativum L.), savory (Satureja fruticosa Béguinot), winter savory (Satureja montana L.), cotton lavender (Santolina chamaecyparisus) and thyme (Thymus vulgaris), is presented. A flow apparatus with a 1 L extractor and two 0.27 L separators was built to perform studies at temperatures ranging from 298 to 353 K and pressures up to 30.0 MPa. The best compromise between yield and composition compared with hydrodistillation (HD) was achieved selecting the optimum experimental conditions of extraction and fractionation. The major differences between HD and SFE oils is the presence of a small percentage of cuticular waxes and the relative amount of thymoquinone, an oxygenated monoterpene with important biological properties, which is present in the oils from thyme and winter savory. On the other hand, the modeling of our data on supercritical extraction of volatile oil from pennyroyal is discussed using Sovová's models. These models have been applied successfully to the other volatile oil extractions. Furthermore, other experimental studies involving supercritical CO₂ carried out in our laboratories are also mentioned.     

Optimisation of stir bar sorptive extraction applied to the determination of volatile compounds in vinegars

Stir bar sorptive extraction (SBSE) was evaluated for analysing volatile compounds in vinegar. The extraction and desorption analytical conditions have been optimised using a two-level factorial design expanded further to a central composite design. This chemometric tool is very appropriate in screening experiments where the aim is to investigate several possibly influential and/or interacting factors. For the extraction step, the optimum analytical conditions were: sample volume 25 ml without dilution, sampling time 120 min, NaCl content 5.85 g, and stirring speed 1250 rpm. For the desorption step, the optimised analytical conditions were: desorption temperature 300 degrees C, cryofocusing temperature -140 degrees C, flow of helium 75 ml min(-1), and desorption time 10 min. The SBSE procedure developed shows detection limits, and linear ranges adequate for analysing this type of compounds. The repeatability values obtained were lower than 10%. SBSE is a very simple, solvent-free, fast technique with better sensitivities, in general, than SPME. However, a disadvantage of this technique is that, up to now, the stir bar offers a limited enrichment capability for polar compounds because is only available with PDMS coating.     

Monte Carlo and modified Tanford-Kirkwood results for macromolecular electrostatics calculations

The understanding of electrostatic interactions is an essential aspect of the complex correlation between structure and function of biological macromolecules. It is also important in protein engineering and design. Theoretical studies of such interactions are predominantly done within the framework of Debye-Hückel theory. A classical example is the Tanford-Kirkwood (TK) model. Besides other limitations, this model assumes an infinitesimally small macromolecule concentration. By comparison to Monte Carlo (MC) simulations, it is shown that TK predictions for the shifts in ion binding constants upon addition of salt become less reliable even at moderately macromolecular concentrations. A simple modification based on colloidal literature is suggested to the TK scheme. The modified TK models suggested here satisfactorily predict MC and experimental shifts in the calcium binding constant as a function of protein concentration for the calbindin D(9k) mutant and calmodulin.     

Transient shear and elongational behavior of blends of PET with a LCP

Blends of polyethylene terephthalate (PET) with a liquid crystalline polymer (LCP) and a compatibilizer were produced by twin screw extrusion and injection molding. Transesterification and compatibilization studies were made in a torque rheometer. The morphology of the injection-molded plaques was studied by scanning electron microscopy. The blends shear growth function was measured in a cone and plate rheometer. The elongational growth function was measured in a modified rotational rheometer. Transesterification was observed in the PET/LCP/compatibilizer 95/5/0 blend. The injection-molded plaques displayed the usual “skin-core” morphology. All the blends were highly shear-thinning, even at low shear rates; thus, a zero-shear viscosity could not be calculated. The compatibilized blend had the highest shear viscosity of all the blends, confirming the strong PET/LCP interphase and the effectiveness of the compatibilizing agent. On the other hand, the 90/10/0 blend had the lowest shear viscosity. All the blends showed strain softening behavior, similar to the PET. The 90/10/0 blend had the highest elongational growth function, while the 95/5/0 had the lowest. The compatibilized blend had an intermediate behavior between both blends.     

Toward an alternative hardness kernel matrix structure in the Electronegativity Equalization Method (EEM)

This study presents an alternative of the Electronegativity Equalization Method (EEM), where the usual Coulomb kernel has been transformed into a smooth function. The new framework, as the classical EEM, permits fast calculations of atomic charges in a given molecule for a small computational cost. The original EEM procedure needs to previously calibrate the different implied atomic hardness and electronegativity, using a chosen set of molecules. In the new EEM algorithm half the number of parameters needs to be calibrated, since a relationship between electronegativities and hardnesses has been found.