Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC

Melamine is a toxic triazine, illegally used as an additive in milk to apparently increase the amount of protein. A chromatographic procedure using a C18 column and a micellar mobile phase of sodium dodecyl sulphate (0.05 M) and propanol (7.5%), buffered at pH 3, and a detection set by absorbance at 210 nm, was reported for the resolution and quantification of melamine in liquid and powdered milk samples. In this work, samples were diluted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in nearly 9.3 min without overlapping the protein band or other endogeneous compounds. The optimal mobile phase composition was taken using a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the European Commission's indications (European Decision 2002/657/EC), and the main analytical parameters studied were: linearity (0.02-100 ppm; r² = 0.999), limit of detection (5 ppb), intra- and inter-day precision (R.S.D. <7.6% and <9.7%, respectively) and robustness (R.S.D. <7.4% for retention time and <5.0% for area). Sensitivity was adequate to detect melamine under the safety limits proposed by the US FDA. Finally, recoveries for several milk samples were found in the 85-109% range.     

Candida rugosa lipase Lip1–polyethyleneglycol interaction and the relation with its partition in aqueous two-phase systems

The interaction between a lipase from Candida rugosa (Lip1) and polyethyleneglycols of different molecular masses was studied using fluorescence and circular dichroism approaches in order to be applied to the analysis of the enzyme partition mechanism in aqueous two-phase systems of polyethyleneglycol–potassium phosphate. The decrease of the partition coefficients with the polyethyleneglycol molecular mass showed that the enzyme partition is driven by the excluded volume effect and not by the enzyme–polymer interaction. The polymer did not affect the secondary and tertiary structure of the enzyme nor its biological activity. The lipase from Candida rugosa lyophilizate was partitioned in favour of the polyethyleneglycol rich phase; PEG 2000 being the system which showed the better enzyme recovery (78.26%) with a purification factor of 2.3. This method could be applied as a first step to isolate the enzyme from a culture medium with good recovery and without modifying the enzymatic capacity and the molecular structure.     

Enzymatic reverse FIA method for total phenols determination in urine samples

A reverse flow injection spectrophotometric enzymatic method is proposed to quantify total phenols in urine samples. The polyphenol oxidase (PPO; EC 1.14.18.1) obtained as a crude extract from sweet potato root (Ipomoea batatas) was used as enzymatic catalyze. The detection limit, the sample throughput and relative standard deviation were 7.7 mg l⁻¹ of total phenols, 49 h⁻¹ and 0.9%, respectively. The method was applied to real samples and a recovery study was carried out in order to its validation.     

A 57Fe Mössbauer characterization of Fe-biopolymer complexes and their relevance to biological molecules

⁵⁷Fe Mössbauer spectroscopy is used to study the interactions, geometry, and the coordination characteristics of the Fe-complexes of biopolymers such as chitosan, glucosamine, and chondritin sulfate. In addition, a computational effort is undertaken for predicting the geometries and energies of the metal complexes by the Density Functional Theory (DFT) methods as implemented in the Gaussian 2003 quantum mechanical program. Both experimental and computational results suggest that the structure of the metal complexes resemble closely the structure of the active sites of metalloenzymes in 2+ or 3+ oxidation states and is at least tetracoordinated and can possibly have six ligands.     

Limits of the paraxial approximation in laser beams

The validity of the paraxial approximation for laser beams in free space is studied via an integral criterion based on the propagation invariants of Helmholtz and paraxial wave equations. This approach allows one to determine the paraxial limit for beams with nondefined spot size and for beams described by more parameters in addition to typical longitudinal wavelength and transverse waist. As examples, the paraxiality of higher-order Hermite, Laguerre, and Bessel-Gaussian beams was completely determined. This method could be extended to nonlinear optics and Bose condensates.     

Postsynthetic Improvement of the Physical Properties in a Metal–Organic Framework through a Single Crystal to Single Crystal Transmetallation

A single crystal to single crystal transmetallation process takes place in the three‐dimensional (3D) metal–organic framework (MOF) of formula Mg^II₂{Mg^II₄[Cu^II₂(Me₃mpba)₂]₃}?45 H₂O ( 1 ; Me₃mpba^4?=N,N′‐2,4,6‐trimethyl‐1,3‐phenylenebis(oxamate)). After complete replacement of the Mg^II ions within the coordination network and those hosted in the channels by either Co^II or Ni^II ions, 1 is transmetallated to yield two novel MOFs of formulae Co₂^II{Co^II₄[Cu^II₂(Me₃mpba)₂]₃}?56 H₂O ( 2 ) and Ni₂^II{Ni^II₄[Cu^II₂(Me₃mpba)₂]₃}? 54 H₂O ( 3 ). This unique postsynthetic metal substitution affords materials with higher structural stability leading to enhanced gas sorption and magnetic properties.     

Micelle‐Triggered β‐Hairpin to α‐Helix Transition in a 14‐Residue Peptide from a Choline‐Binding Repeat of the Pneumococcal Autolysin LytA

Choline‐binding modules (CBMs) have a ββ‐solenoid structure composed of choline‐binding repeats (CBR), which consist of a β‐hairpin followed by a short linker. To find minimal peptides that are able to maintain the CBR native structure and to evaluate their remaining choline‐binding ability, we have analysed the third β‐hairpin of the CBM from the pneumococcal LytA autolysin. Circular dichroism and NMR data reveal that this peptide forms a highly stable native‐like β‐hairpin both in aqueous solution and in the presence of trifluoroethanol, but, strikingly, the peptide structure is a stable amphipathic α‐helix in both zwitterionic (dodecylphosphocholine) and anionic (sodium dodecylsulfate) detergent micelles, as well as in small unilamellar vesicles. This β‐hairpin to α‐helix conversion is reversible. Given that the β‐hairpin and α‐helix differ greatly in the distribution of hydrophobic and hydrophilic side chains, we propose that the amphipathicity is a requirement for a peptide structure to interact and to be stable in micelles or lipid vesicles. To our knowledge, this “chameleonic” behaviour is the only described case of a micelle‐induced structural transition between two ordered peptide structures.     

Surface‐Functionalized Nanoparticles by Olefin Metathesis: A Chemoselective Approach for In Vivo Characterization of Atherosclerosis Plaque

The use of click chemistry reactions for the functionalization of nanoparticles is particularly useful to modify the surface in a well‐defined manner and to enhance the targeting properties, thus facilitating clinical translation. Here it is demonstrated that olefin metathesis can be used for the chemoselective functionalization of iron oxide nanoparticles with three different examples. This approach enables, in one step, the synthesis and functionalization of different water‐stable magnetite‐based particles from oleic acid‐coated counterparts. The surface of the nanoparticles was completely characterized showing how the metathesis approach introduces a large number of hydrophilic molecules on their coating layer. As an example of the possible applications of these new nanocomposites, a focus was taken on atherosclerosis plaques. It is also demonstrated how the in vitro properties of one of the probes, particularly its Ca²⁺‐binding properties, mediate their final in vivo use; that is, the selective accumulation in atherosclerotic plaques. This opens promising new applications to detect possible microcalcifications associated with plaque vulnerability. The accumulation of the new imaging tracers is demonstrated by in vivo magnetic resonance imaging of carotids and aorta in the ApoE^?/? mouse model and the results were confirmed by histology.     

On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.     

Single-walled carbon nanohorns immobilized on a microporous hollow polypropylene fiber as a sorbent for the extraction of volatile organic compounds from water samples

We have evaluated the behavior of single-walled carbon nanohorns as a sorbent for headspace and direct immersion (micro)solid phase extraction using volatile organic compounds (VOCs) as model analytes. The conical carbon nanohorns were first oxidized in order to increase their solubility in water and organic solvents. A microporous hollow polypropylene fiber served as a mechanical support that provides a high surface area for nanoparticle retention. The extraction unit was directly placed in the liquid sample or the headspace of an aqueous standard or a water sample to extract and preconcentrate the VOCs. The variables affecting extraction have been optimized. The VOCs were then identified and quantified by GC/MS. We conclude that direct immersion of the fiber is the most adequate method for the extraction of VOCs from both liquid samples and headspace. Detection limits range from 3.5 to 4.3 ng L^?1 (excepted for toluene with 25 ng L^?1), and the precision (expressed as relative standard deviation) is between 3.9 and 9.6 %. The method was applied to the determination of toluene, ethylbenzene, various xylene isomers and styrene in bottled, river and tap waters, and the respective average recoveries of spiked samples are 95.6, 98.2 and 86.0 %.