Continuous solid-phase extraction method for the determination of amines in human urine following on-line microwave-assisted acid hydrolysis

Humans are exposed to endogenous or exogenous formation of aromatic amines (AAs) and N-nitrosamines (NAms), which are considered to be potent carcinogens. The objective of this study was to monitor AAs and NAms in human urine to obtain a way to assess exposure. However, while NAms can be directly detected in urine samples, AAs require hydrolysis to convert their conjugates into free amines. A semiautomatic flow-base method is proposed for the simultaneous determination of aliphatic and aromatic NAms, anilines and chloroanilines in human urine in one analytical run. Conjugated AAs are released from urine by on-line microwave-assisted acid hydrolysis without degradation of NAms; all amines were then preconcentrated using solid-phase extraction. Separation/determinations are carried out by gas chromatography and mass spectrometry operating in selected ion monitoring mode. The method is fast (∼15 min for 25 mL of sample) and provides low limits of detection (from 2 to 26 ng/L) with good precision (relative standard deviation within and between days less than 7%). Finally, the proposed method was successfully applied to check AAs and NAms in the human urine of exposed and unexposed researchers. The kinetics of amine excretion in the urine of the researchers exposed is calculated after termination of the exposure and shows half-life times between 1.3 and 2.1 h, and that the dosage absorbed was eliminated within 6 h after exposure.     

Different reactivity of hydroxylamine with carbamoyl azides and carbamoyl cyanides: synthesis of hydroxyureas and carbamoyl amidoximes

The carbamoylating agents carbamoyl azides and carbamoyl cyanides (aka cyanoformamides) react with hydroxylamine in different ways, leading in the first case to N-hydroxyureas and, in the case of carbamoyl cyanides, to carbamoyl amidoxime derivatives. The synthetic procedure developed for the latter type of compound, which represents an interesting precursor for heterocyclic structures, allowed the highly efficient preparation of a wide selection of examples. The Z configuration of the double bond in the amidoxime moiety was proposed on the basis of comparison between experimental and calculated (13)C and (15)N NMR chemical shift values for the isopropyl and benzyl derivatives.     

Selecting green suppliers based on GSCM practices: Using fuzzy TOPSIS applied to a Brazilian electronics company

Due to an increased awareness and significant environmental pressures from various stakeholders, companies have begun to realize the significance of incorporating green practices into their daily activities. This paper proposes a framework using Fuzzy TOPSIS to select green suppliers for a Brazilian electronics company; our framework is built on the criteria of green supply chain management (GSCM) practices. An empirical analysis is made, and the data are collected from a set of 12 available suppliers. We use a fuzzy TOPSIS approach to rank the suppliers, and the results of the proposed framework are compared with the ranks obtained by both the geometric mean and the graded mean methods of fuzzy TOPSIS methodology. Then a Spearman rank correlation coefficient is used to find the statistical difference between the ranks obtained by the three methods. Finally, a sensitivity analysis has been performed to examine the influence of the preferences given by the decision makers for the chosen GSCM practices on the selection of green suppliers. Results indicate that the four dominant criteria are Commitment of senior management to GSCM; Product designs that reduce, reuse, recycle, or reclaim materials, components, or energy; Compliance with legal environmental requirements and auditing programs; and Product designs that avoid or reduce toxic or hazardous material use.     

Colour diversification in octocorals based on conjugated polyenes: A Raman spectroscopic view

Polyenic pigments in octocorals have been investigated by Raman spectroscopy using laser excitation at 532, 785 and 1064 nm. The spectral features suggest the structural nature of carotenoids from Phyllogorgia dilatata, Leptogorgia punicea, Muricea atlantica, Carijoa riisei and conjugated polyenals from L. punicea, L. setacea, Muricea flamma and Renilla muelleri. The observed vibrational bands at ca. 1540–1520 ν₁(C=C), 1159 ν₂(C–C) and 1005 cm⁻¹ ρ₃(C–CH₃) were assigned to carotenoids, whereas the identification of non‐methylated conjugated polyenals have been proposed due to two major Raman bands at ca. 1500 and 1120 cm^‐1, assigned to ν(C=C) and ν(C–C), respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Fatty acids as chemotaxonomic markers of marine macrophytes from Rio de Janeiro state, Brazil

The distribution of fatty acids in 13 species of macroalgae (Chlorophyta, Ochrophyta and Rhodophyta) and 1 seagrass (Spartina sp), collected on the Rio de Janeiro state coast was determined. The results were evaluated in search of correlations between the taxonomic and phylogenetic position of these macrophytes. Statistical analyses showed the effectiveness as taxonomic and phylogenetic markers of the distribution of the methyl fatty acid esters in these macrophytes.     

Controlled Click‐Assembly of Well‐Defined Hetero‐Bifunctional Cubic Silsesquioxanes and Their Application in Targeted Bioimaging

A general procedure for the assembly of hetero‐bifunctional cubic silsesquioxanes with diverse functionality and a perfectly controlled distribution of functional groups on the inorganic framework has been developed. The method is based on a two‐step sequence of mono‐ and hepta‐functionalization through the ligand‐accelerated copper(I)‐catalyzed azide–alkyne cycloaddition of a readily available octaazido cubic silsesquioxane. The stoichiometry of the reactants and the law of binomial distribution essentially determine the selectivity of the key monofunctionalization reaction when a copper catalyst with strong donor ligands is used. The methodology has been applied to the preparation of a set of bifunctional nano‐building‐blocks with orthogonal reactivity for the controlled assembly of precisely defined hybrid nanomaterials and a fluorescent multivalent probe for application in targeted cell‐imaging. The inorganic cage provides an improved photostability to the covalently attached dye as well as a convenient framework for the 3D multivalent display of the pendant epitopes. Thus, fluorescent bioprobes based on well‐defined cubic silsesquioxanes offer interesting advantages over more conventional fully organic analogues and ill‐defined hybrid nanoparticles and promise to become powerful tools for the study of cell biology and for biomedical applications.     

Gaps in the poset of projections in the Calkin algebra

We study the gap structure of the partial order of projections of the Calkin algebra of a complex, separable, infinite-dimensional Hilbert space. We prove the existence of an analytic Hausdorff gap in this partial order. As a consequence we obtain that under Todorcevic’s Axiom and MA the gap spectrum of P(C(H)) is strictly bigger than the gap spectrum of P(ω)/Fin.     

Fast chromatographic method for the determination of dyes in beverages by using high performance liquid chromatography—Diode array detection data and second order algorithms

A fast chromatographic methodology is presented for the analysis of three synthetic dyes in non-alcoholic beverages: amaranth (E123), sunset yellow FCF (E110) and tartrazine (E102). Seven soft drinks (purchased from a local supermarket) were homogenized, filtered and injected into the chromatographic system. Second order data were obtained by a rapid LC separation and DAD detection. A comparative study of the performance of two second order algorithms (MCR-ALS and U-PLS/RBL) applied to model the data, is presented. Interestingly, the data present time shift between different chromatograms and cannot be conveniently corrected to determine the above-mentioned dyes in beverage samples. This fact originates the lack of trilinearity that cannot be conveniently pre-processed and can hardly be modelled by using U-PLS/RBL algorithm. On the contrary, MCR-ALS has shown to be an excellent tool for modelling this kind of data allowing to reach acceptable figures of merit. Recovery values ranged between 97% and 105% when analyzing artificial and real samples were indicative of the good performance of the method. In contrast with the complete separation, which consumes 10 mL of methanol and 3 mL of 0.08 mol L⁻¹ ammonium acetate, the proposed fast chromatography method requires only 0.46 mL of methanol and 1.54 mL of 0.08 mol L⁻¹ ammonium acetate. Consequently, analysis time could be reduced up to 14.2% of the necessary time to perform the complete separation allowing saving both solvents and time, which are related to a reduction of both the costs per analysis and environmental impact.     

On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.     

Effect of Denaturating Agents on the Structural Alterations and Drug-Binding Capacity of Human and Bovine Serum Albumin

Sulindac (SDC) is a nonsteroidal anti-inflammatory drug, useful in the treatment of chronic and acute inflammatory conditions. The binding of SDC to human serum albumin and bovine serum albumin was studied by fluorescence spectroscopy and the results compared with those obtained for human and bovine serum albumin destabilized with urea and guanidine hydrochloride. SDC interacts with serum albumin within the hydrophobic subdomain IIA and/or IB. The analysis of the binding constants shows that the studied albumins preserve their binding capacity in the presence of destabilizing/denaturating agents. The denaturation coefficient has been calculated to estimate the degree of denaturation of protein.