Gold internal standard correction for elemental imaging of soft tissue sections by LA-ICP-MS: element distribution in eye microstructures

Laser ablation coupled to inductively coupled plasma mass spectrometry has been developed for the elemental imaging of Mg, Fe and Cu distribution in histological tissue sections of fixed eyes, embedded in paraffin, from human donors (cadavers). This work presents the development of a novel internal standard correction methodology based on the deposition of a homogeneous thin gold film on the tissue surface and the use of the ¹⁹⁷Au⁺ signal as internal standard. Sample preparation (tissue section thickness) and laser conditions were carefully optimized, and internal normalisation using ¹⁹⁷Au⁺ was compared with ¹³C⁺ correction for imaging applications. ²⁴Mg⁺, ⁵⁶Fe⁺ and ⁶³Cu⁺ distributions were investigated in histological sections of the anterior segment of the eye (including the iris, ciliary body, cornea and trabecular meshwork) and were shown to be heterogeneously distributed along those tissue structures. Reproducibility was assessed by imaging different human eye sections from the same donor and from ten different eyes from adult normal donors, which showed that similar spatial maps were obtained and therefore demonstrate the analytical potential of using ¹⁹⁷Au⁺ as internal standard. The proposed analytical approach could offer a robust tool with great practical interest for clinical studies, e.g. to investigate trace element distribution of metals and their alterations in ocular diseases.

Critical evaluation of the potential of radiofrequency pulsed glow discharge–time-of-flight mass spectrometry for depth-profile analysis of innovative materials

The combination of radiofrequency pulsed glow discharge (RF-PGD) analytical plasmas with time-of-flight mass spectrometry (TOFMS) has promoted the applicability of this ion source to direct analysis of innovative materials. In this sense, this emerging technique enables multi-elemental depth profiling with high depth resolution and sensitivity, and simultaneous production of elemental, structural, and molecular information. The analytical potential and trends of this technique are critically presented, including comparison with other complementary and well-established techniques (e.g. SIMS, GD–OES, etc.). An overview of recent applications of RF-PGD–TOFMS is given, including analysis of nano-structured materials, coated-glasses, photovoltaic materials, and polymer coatings     

Gas chromatography–triple-quadrupole mass spectrometry for analysis of selected polyhalogenated pollutants in plants. Comparison of extraction methods

Different extraction methods, followed by gas chromatography coupled to triple quadrupole mass spectrometry, were evaluated for simultaneous extraction of seven polychlorinated biphenyls (PCBs) and six polybrominated diphenyl ethers (PBDEs) from common weeds. Pressurized liquid extraction (PLE) with in-cell clean-up, ultrasound-assisted extraction (UAE) with in-column clean-up, and UAE with dispersive solid-phase extraction (dSPE) clean-up were evaluated and compared. In-cell clean-up with 4 g Florisil and 0.5 g graphitized carbon black (GCB) and two extraction cycles of 10 min with n-hexane–ethyl acetate 80:20 (v/v) at 60 °C were used for the PLE procedure. UAE with in-column clean-up was conducted under conditions similar to those reported for the PLE method whereas in UAE with dSPE clean-up purification of the extract was performed after extraction using primary and secondary amine sorbent (PSA) and GCB. Recovery from 82 to 104 % was obtained for all the compounds by PLE whereas, in general, lower extraction efficiency was obtained by UAE with in-column clean-up (especially for BDE-17 and BDE-183, for which recovery was 70 and 41 %, respectively) and by UAE with dSPE clean-up, for which the main drawback is that BDE-183 cannot be extracted. Finally, PLE was used for analysis of PCBs and PBDEs in different plants (Lolium rigidum, Lactuca serriola, Malva sylvestris, and Verbascum thapsus) collected from residential and/or rural areas of Madrid (Spain). Several of the analyzed compounds were detected at low levels in these plants, but only PCB-153 could be quantified.

Synthesis of New Five Membered Nitrogen Containing Heterocycles Bearing D-Galactose Side Chains

The synthesis of 5-[6′-deoxy-(1′,2′:3′,4′-di-O-isopropylidene-α-D-galactopyranos-6′-yl)]tetrazole and its reaction with acetic anhydride and 1,2:3,4-di-O-isopropylidene-6-O-(4-toluenesulfonyl)-α-D-galactopyranose are described.     

A Click Approach to Polymetallic Chromium(0) and Tungsten(0) Fischer‐Carbene Complexes and Their Use in the Synthesis of Functionalized Polymetallic Metal?Carbene Complexes

Alkynylamino Cr⁰ and W⁰ Fischer carbenes undergo a CuAAC reaction with a diverse range of di‐, tri‐, and tetra‐azides to produce polymetallic chromium(0) and tungsten(0) (Fischer)‐carbene complexes in good‐to‐excellent yields. This method is simple, versatile, and is suitable for the preparation of a diverse range of structures with a high level of symmetry. Moreover, the resulting polymetallic carbene complexes are suitable partners for the peripheral functionalization of the metal nuclei, whilst retaining the metal fragment. This fact has been demonstrated in a simultaneous Pauson–Khand reaction, which, in some cases, allows for the generation of four bicyclic [5,5] rings on the periphery of a tetrametallic molecule in a process that involves the formation of 12 new C? C bonds, with four simultaneous CO‐insertion processes. The electrochemistry of the polymetallic Fischer carbenes show completely independent behavior for each nucleus, as well as an anomalous observation of the reversible oxidation of the allyl substituents, which has not been reported before in this class of chemistry.     

Proton‐Assisted Hydrogen Activation on Polyhedral Cations

The treatment of [1,1‐(PR₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] (PR₃=PMe₃ ( 2 ) or PPh₃ and PMe₃ ( 3 ); Py=pyridine) with triflic acid (TfOH) affords [1,3‐μ‐(H)‐1,1‐(PR₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ (PR₃=PMe₃ ( 4 ) or PMe₃ and PPh₃ ( 5 )). These products result from the protonation of the 11‐vertex closo‐cages along the Rh(1)? B(3) edge. These unusual cationic rhodathiaboranes are stable in solution and in the solid state and they have been fully characterized by multinuclear NMR spectroscopy. In addition, compound 5 was characterized by single‐crystal X‐ray diffraction. One remarkable feature in these structures is the presence of three {Rh(PPh₃)(PMe₃)}‐to‐{ηⁿ‐SB₉H₈(Py)} (n=4 or 5) conformers in the unit cell, thus giving an uncommon case of conformational isomerism. [1,1‐(PPh₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] ( 1 ), that is, the bis‐PPh₃‐ligated analogue of compounds 2 and 3 , is also protonated by TfOH, but, in marked contrast, the resulting cation, [1,3‐μ‐(H)‐1,1‐(PPh₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ ( 6 ), is attacked by a triflate anion with the release of a PPh₃ ligand and the formation of [8,8‐(OTf)(PPh₃)‐9‐(Py)‐nido‐8,7‐RhSB₉H₉] ( 9 ). The result is an equilibrium that involves cationic species 6 , neutral OTf‐ligated compound 9 , and [HPPh₃]⁺, which is formed upon protonation of the released PPh₃ ligand. The resulting ionic system reacts readily with H₂ to give cationic species [8,8,8‐(H)(PPh₃)₂‐9‐(Py)‐nido‐8,7‐RhSB₉H₉]⁺ ( 7 ). This reactivity is markedly higher than that previously found for compound 1 and it introduces a new example of proton‐assisted H₂ activation that occurs on a polyhedral boron‐containing compound.     

Controlled Click‐Assembly of Well‐Defined Hetero‐Bifunctional Cubic Silsesquioxanes and Their Application in Targeted Bioimaging

A general procedure for the assembly of hetero‐bifunctional cubic silsesquioxanes with diverse functionality and a perfectly controlled distribution of functional groups on the inorganic framework has been developed. The method is based on a two‐step sequence of mono‐ and hepta‐functionalization through the ligand‐accelerated copper(I)‐catalyzed azide–alkyne cycloaddition of a readily available octaazido cubic silsesquioxane. The stoichiometry of the reactants and the law of binomial distribution essentially determine the selectivity of the key monofunctionalization reaction when a copper catalyst with strong donor ligands is used. The methodology has been applied to the preparation of a set of bifunctional nano‐building‐blocks with orthogonal reactivity for the controlled assembly of precisely defined hybrid nanomaterials and a fluorescent multivalent probe for application in targeted cell‐imaging. The inorganic cage provides an improved photostability to the covalently attached dye as well as a convenient framework for the 3D multivalent display of the pendant epitopes. Thus, fluorescent bioprobes based on well‐defined cubic silsesquioxanes offer interesting advantages over more conventional fully organic analogues and ill‐defined hybrid nanoparticles and promise to become powerful tools for the study of cell biology and for biomedical applications.     

Methodology for measuring the thermal conductivity of insulating samples with small dimensions by heat flow meter technique

Journal of Thermal Analysis and Calorimetry - Nowadays, developing advanced, highly insulating materials for minimizing heat losses in buildings is of utmost relevance. Thus, there is a constant...     

Antioxidant capacity and antibacterial activity from Annona cherimola phytochemicals by ultrasound-assisted extraction and its comparison to conventional methods

In recent years, the food, pharmacy, and cosmetic industries have focused on the search of natural compounds with antimicrobial and antioxidant properties; commonly, these compounds are obtained from Kingdom plantae. The aim of the present work is comparing antibacterial and antioxidant capacity of Annona cherimola Mill leaves, using different extraction methods. The ultrasound assisted extraction technique (UAE) was compared with conventional techniques: Soxhlet and maceration. Water and ethanol were used as solvents for leaves extractions performed with these three methods. The main acetogenins reported in Annona cherimola Mill and Annona muricata L. species were simulated using the functional hybrid B3LYP and to confirm its presence, analysis of the compound composition was performed using FT-IR, UV–Vis and HPLC. Total phenolics (TP) and flavonoids (TF) were determined by spectroscopy techniques and novel Differential Pulse Voltammetry (DPV) electrochemical technique. Total Antioxidant Capacity (TAC) of the extracts was measured, using the DPPH, FRAP and CUPRAC techniques. The highest antioxidant content was found in the Soxhlet water extracts; even so, the UAE technique presented an attractive alternative due to considerable reduction in extraction time, which was greater than 99%, and possible selectivity in compounds extraction. Finally, antibacterial activity of the extracts was evaluated, obtaining the best results against gram-positive bacteria using UAE water extract. In this way, the UAE technique presents an excellent extraction option due to the considerable reduction in time and energy, as well as the increase in antibacterial activity.     

Analysis of the Lipidome of Xenografts Using MALDI-IMS and UHPLC-ESI-QTOF

Human tumor xenografts in immunodeficient mice are a very popular model to study the development of cancer and to test new drug candidates. Among the parameters analyzed are the variations in the lipid composition, as they are good indicators of changes in the cellular metabolism. Here, we present a study on the distribution of lipids in xenografts of NCI-H1975 human lung cancer cells, using MALDI imaging mass spectrometry and UHPLC-ESI-QTOF. The identification of lipids directly from the tissue by MALDI was aided by the comparison with identification using ESI ionization in lipid extracts from the same xenografts. Lipids belonging to PCs, PIs, SMs, DAG, TAG, PS, PA, and PG classes were identified and their distribution over the xenograft was determined. Three areas were identified in the xenograft, corresponding to cells in different metabolic stages and to a layer of adipose tissue that covers the xenograft.