Influence of substitutions on asymmetric dihydroxychlorins with regard to intracellular uptake, subcellular localization and photosensitization of Jurkat cells

The search for new efficient sensitizers for photodynamic therapy (PDT) points to improve photophysical properties like absorption in the red region and singlet oxygen quantum yield as well as to control the localization of the sensitizer within the tumour cell. Depending on their physicochemical properties and their uptake mechanism, sensitizers can reach different intracellular concentrations and localize in different subcellular compartments. Moreover, the preferential localization of a sensitizer in target organelles, like mitochondria or lysosomes, could determine the cell death mechanism after PDT. This study aimed to investigate the influence of substitutions on dihydroxychlorins with regard to intracellular uptake, subcellular localization and cell death pathway. Moreover, the effect of a liposome-based delivery system was tested. The intracellular uptake was found to be strictly dependent on the sensitizer molecular structure and the means of its delivery. The most polar sensitizer in this study (compound 3) had, depending on incubation time, an intracellular concentration 2-8 times higher than the unsubstituted chlorin 1. All investigated photosensitizers localize predominantly in lysosomes but after longer incubation times weak fluorescence intensity was also detected in mitochondria and Golgi apparatus. The cell death pathway was found to be influenced by the sensitizer intracellular concentration and the applied light doses. In general, the increasing amphiphilicity of the sensitizer molecules is correlated with an increased sensitizer uptake and an increased rate of necrotic cells after irradiation.     

Electronic structure of A- and B-site doped lanthanum manganites: a combined X-ray spectroscopic study

The electronic properties of a series of colossal magnetoresistance (CMR) compounds, namely LaMnO3, La(1-x)Ba(x)(MnO3 (0.2 < or = x < or = 0.55), La(0.76)Ba(0.24)Mn(0.84)Co(0.16)O3, and La(0.76)Ba(0.24)Mn(0.78)Ni(0.22)O3, have been investigated in a detailed spectroscopic study. A combination of X-ray photoelectron spectroscopy (XPS), X-ray emission spectroscopy (XES), X-ray absorption spectroscopy (XAS), and resonant inelastic X-ray scattering (RIXS) was used to reveal a detailed picture of the electronic structure in the presence of Ba, Co, and Ni doping in different concentrations. The results are compared with available theory. The valence band of La(1-x)()Ba(x)MnO3 (0 < or = x < or = 0.55) is dominated by La 5p, Mn 3d, and O 2p states, and strong hybridization between Mn 3d and O 2p states is present over the whole range of Ba concentrations. Co-doping at the Mn site leads to an increased occupancy of the e(g) states near the Fermi energy and an increase in the XPS valence band intensity between 0.5 and 5 eV, whereas the Ni-doped sample shows a lower density of occupied states near the Fermi energy. The Ni d states are located in a band spanning the energy range of 1.5-5 eV. XAS spectra indicate that the hole doping leads to mixed Mn 3d-O 2p states. Furthermore, RIXS at the Mn L edge has been used to probe d-d transitions and charge-transfer excitations in La(1-x)Ba(x)MnO3.     

Membrane electroporation and electromechanical deformation of vesicles and cells

Analysis of the reduced turbidity (delta T-/T0) and absorbance (delta A-/A0) relaxations of unilamellar lipid vesicles, doped with the diphenylhexatrienyl-phosphatidylcholine (beta-DPH pPC) lipids in high-voltage rectangular electrical field pulses, demonstrates that the major part of the turbidity and absorbance dichroism is caused by vesicle elongation under electric Maxwell stress. The kinetics of this electrochemomechanical shape deformation (time constants 0.1 < or = tau/microsecond < or = 3) is determined both by the entrance of water and ions into the bulk membrane phase to form local electropores, and by the faster processes of membrane stretching and smoothing of thermal undulations. Moreover, the absorbance dichroism indicates local displacements of the chromophore relative to the membrane normal in the field. The slightly slower relaxations of the chemical turbidity (delta T+/T0) and absorbance (delta A+/A0) modes are both associated with the entrance of solvent into the interface membrane/medium, caused by the alignment of the bipolar lipid head groups in one of the leaflets at the pole caps of the vesicle bilayer. In addition, (delta T+/T0) indicates changes in vesicle shape and volume. The results for lipid vesicles provide guidelines for the analysis of electroporative deformations of biological cells.     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

Re4(CO)12[μ3-InRe(CO)5]4 und Re2(CO)8[μ-InRe(CO)5]2-cluster aus dem reaktionssystem In/Re2(CO)10 in xylol

The thermally stable solids Re₂(CO)₈[μ-InRe(CO)₅]₂ and Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ could be obtained by treatment of In with Re₂(CO)₁₀ in a bomb tube. A mechanism of the formation of the latter cluster from the first one is proposed. Compared with Re₂(CO)₈[μ-InRe(CO)₅]₂, Re₄(CO)₁₂[μ₃_InRe(CO)₅]₄ shows in polar solvents an unusual high stability, which can be explained by the higher coordination number of In with rhenium carbonyl ligands. Re₄(CO)₁₂-[μ₃-InRe(CO)₅]₄ dissolves monomerically in acetone, where as Re₂(CO)₈[μ-InRe(CO)₅]₂ dissociates yielding Re(CO)₅^? anions. Single-crystal X-ray analyses of Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ establish the metal skeleton. The central molecular fragment Re₄(CO)₁₂ contains a tetrahedral arrangement of four bonded Re atoms [ReRe 302.8 (5) pm]. The triangles of this fragment are capped with a μ₃-InRe(CO)₅ group each [InRe(terminal) 273.5 (7) pm; InRe (polyhedral) 281.8 (7) pm]. The bridging type of In atoms with the Re₄ tetrahedron and the metal skeleton was realized for the first time. By treating Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ with Br₂ the existence of Re(CO)₅ ligands could be proved by isolating BrRe(CO)₅.     

Conformation and Dynamics of (−)-β-Caryophyllene

(?)-β-Caryophyllene (1) adopts three conformations in solution: αα(48%), βα(28%), and ββ(24%). The conformations were identified by an analysis of the ¹³C- and ¹H-NMR spectra at ?87.2 and ?153.8° in connection with APT, HETCOR, and COSY spectra, and subsequent NOESY experiments. The activation parameters of the conversion αα → βα were determined from a bandshape analysis of exchange-broadened ¹³C-NMR spectra of 8-[methylene-¹³C]- 1 to give ΔH^≠ = 5.9 ± 0.3 kcal/mol, ΔS^? = ?8.1 ± 1.8 cal/mol. · K. and ΔG = ?8.3 ± 0.8 kcal/mol. The observed population ratio of the different conformers is best described by MM3.     

Capillary array scanner for time-resolved detection and identification of fluorescently labelled DNA fragments

The first capillary array scanner for time-resolved fluorescence detection in parallel capillary electrophoresis based on semiconductor technology is described. The system consists essentially of a confocal fluorescence microscope and a x,y-microscope scanning stage. Fluorescence of the labelled probe molecules was excited using a short-pulse diode laser emitting at 640 nm with a repetition rate of 50 MHz. Using a single filter system the fluorescence decays of different labels were detected by an avalanche photodiode in combination with a PC plug-in card for time-correlated single-photon counting (TCSPC). The time-resolved fluorescence signals were analyzed and identified by a maximum likelihood estimator (MLE). The x,y-microscope scanning stage allows for discontinuous, bidirectional scanning of up to 16 capillaries in an array, resulting in longer fluorescence collection times per capillary compared to scanners working in a continuous mode. Synchronization of the alignment and measurement process were developed to allow for data acquisition without overhead. Detection limits in the subzeptomol range for different dye molecules separated in parallel capillaries have been achieved. In addition, we report on parallel time-resolved detection and separation of more than 400 bases of single base extension DNA fragments in capillary array electrophoresis. Using only semiconductor technology the presented technique represents a low-cost alternative for high throughput DNA sequencing in parallel capillaries.     

Direct structure determination using residual dipolar couplings: reaction-site conformation of methionine sulfoxide reductase in solution

Residual dipolar couplings (RDC) from partially aligned molecules provide long-range structural data and are thus particularly well adapted to rapid structure validation or protein fold recognition. Extensive measurements in two alignment media can also provide precise de novo structure from RDC alone. We have applied a novel combination of these approaches to the study of methionine sulfoxide reductase (MsrA) from Erwinia chrysanthemi, a 27 kDa enzyme essential for repairing oxidative stress damage. The tertiary fold was initially validated by comparing backbone RDC to expected values from the crystal structure of the homologous MsrA from Escherichia coli. Good agreement was found throughout the chain, verifying the overall topology of the molecule, with the exception of the catalytically important peptide P196-L202, where strong and systematic RDC violation was observed. No evidence for local differential mobility in this region was detected, implying that the structure of the strand differs in the two molecules. We have therefore applied the de novo approach meccano to determine the conformation of this peptide using only RDC. A single conformation is found that is in agreement with all measured data. The aligned peptide can be docked onto the expected covalence of the rest of the template molecule while respecting its strictly defined relative orientation. In contrast to the structure of MsrA from E. coli, the reactive side chain of Cys200 is oriented toward the interior of the molecule and therefore closer to the catalytic Cys53, obviating the need for previously proposed conformational reorganization prior to formation of this disulfide intermediate. This analysis requires only backbone assignment and uses unambiguously assigned and readily measurable structural data, thereby greatly economizing investigation time compared to established nuclear Overhauser effect- (nOe-) based structure calculation methods.     

Particle zips: vertical emulsion films with particle monolayers at their surfaces

Vertical emulsion films with particle monolayers at their surfaces have been studied by direct microscope observations. The effects of particle wettability and surface coverage on the structure and stability of water films in octane and octane films in water have been investigated. Monodisperse silica particles (3 microm in diameter) hydrophobized to different extents have been used. It is found that the structure and stability of emulsion films strongly depend on the film type (water-in-oil or oil-in-water), the particle contact angle, the interactions between particles from the same and the opposite monolayer, and the monolayer density. Stable films are observed only when the particle wettability fulfills the condition for stable particle bridges--in agreement with the concept that hydrophilic particles can give stable oil-in-water emulsions, whereas hydrophobic ones give water-in-oil emulsions. In the case of water films with dilute disordered monolayers at their surfaces, the hydrophilic particles are expelled from the film center toward its periphery, giving a dimple surrounded by a ring of particles bridging the film surfaces. In contrast, the thinning of octane films with dilute ordered monolayers at their surfaces finally leads to the spontaneous formation of a dense crystalline monolayer of hydrophobic particles bridging both surfaces at the center of the film. The behaviors of water and octane films with dense close-packed particle monolayers at their surfaces are very similar. In both cases, a transition from bilayer to bridging monolayer is observed at rather low capillary pressures. The implications of the above finding for particle stabilized emulsions are discussed.     

Epitaxy of Cd on muscovite

Cd is deposited on air cleaved and annealed muscovite. The Cd films were seeded by Ag. Then Cd grows epitaxially with its (0001)-planes parallel to the (001)-plane of muscovite.