Assessment of the various ionization methods in the analysis of metal salen complexes by mass spectrometry

Metal salen complexes are one of the most frequently used catalysts in enantioselective organic synthesis. In the present work, we compare a series of ionization methods that can be used for the mass spectral analysis of two types of metalosalens: ionic complexes (abbreviated as Com⁺X^?) and neutral complexes (NCom). These methods include electron ionization and field desorption (FD) which can be applied to pure samples and atmospheric pressure ionization techniques: electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) which are suitable for solutions. We found that FD is a method of choice for recording molecular ions of the complexes containing even loosely bonded ligands. The results obtained using atmospheric pressure ionization methods show that the results depend mainly on the structure of metal salen complex and the ionization method. In ESI spectra, Com⁺ ions were observed, while in APCI and APPI spectra both Com⁺ and [Com + H]⁺ ions are observed in the ratio depending on the structure of the metal salen complex and the solvent used in the analysis. For complexes with tetrafluoroborate counterion, an elimination of BF₃ took place, and ions corresponding to complexes with fluoride counterion were observed. Experiments comparing the relative sensitivity of ESI, APCI and APPI (with and without a dopant) methods showed that for the majority of the studied complexes ESI is the most sensitive one; however, the sensitivity of APCI is usually less than two times lower and for some compounds is even higher than the sensitivity of ESI. Both methods show very high linearity of the calibration curve in a range of about 3 orders of magnitude of the sample concentration. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of cooling rate on crystallisation kinetics on microstructure of cast zinc alloys

In this study, the change of the cooling rate in the range of about 0.1–1 °C s^?1 and the addition of Sr on the crystallization kinetics of the cast zinc alloys of the ZnAlCu type, as well as its relation to the microstructure were also investigated. Therefore, the aim of the rapid crystallisation is the achievement of materials with better properties, which can be obtained by refinement of the dendritic or eutectic microstructure, elimination of segregation, or creation of metastable phases and their morphology changes. In the investigated alloys, the change of cooling rate of 1 °C s^?1 has caused microstructure’s refinement as well as increase in hardness. Increase in the cooling rate causes also morphology changes of the η + α eutectic, and makes generally a global overcooling of the alloy as well as change in the temperatures at the beginning of crystallization T _DN and of the alloy crystallization T _S. The presented investigations concerning the electron microscopy methods, including transmission electron microscopy, allow revealing the crystallographic structure, based on the d-spacing changes, as well as the diffraction method used for phase determination, which is a helpful tool for the explanation of the important points in the thermo-derivative analysis curve, where the relation between the amount of phase and the occurrence of new phases can be determined.     

Platinum‐Promoted Ga/Al2O3 as Highly Active,Selective, and Stable Catalyst for the Dehydrogenation of Propane

A novel catalyst material for the selective dehydrogenation of propane is presented. The catalyst consists of 1000 ppm Pt, 3 wt % Ga, and 0.25 wt % K supported on alumina. We observed a synergy between Ga and Pt, resulting in a highly active and stable catalyst. Additionally, we propose a bifunctional active phase, in which coordinately unsaturated Ga³⁺ species are the active species and where Pt functions as a promoter.     

Multicomponent Peptide Stapling as a Diversity‐Driven Tool for the Development of Inhibitors of Protein–Protein Interactions

Stapled peptides are chemical entities in‐between biologics and small molecules, which have proven to be the solution to high affinity protein–protein interaction antagonism, while keeping control over pharmacological performance such as stability and membrane penetration. We demonstrate that the multicomponent reaction‐based stapling is an effective strategy for the development of α‐helical peptides with highly potent dual antagonistic action of MDM2 and MDMX binding p53. Such a potent inhibitory activity of p53‐MDM2/X interactions was assessed by fluorescence polarization, microscale thermophoresis, and 2D NMR, while several cocrystal structures with MDM2 were obtained. This MCR stapling protocol proved efficient and versatile in terms of diversity generation at the staple, as evidenced by the incorporation of both exo‐ and endo‐cyclic hydrophobic moieties at the side chain cross‐linkers. The interaction of the Ugi‐staple fragments with the target protein was demonstrated by crystallography.     

Site‐Selective Oxidation of Monolayered Liquid‐Exfoliated WS2 by Shielding the Basal Plane through Adsorption of a Facial Amphiphile

In recent years, various functionalization strategies for transition‐metal dichalcogenides have been explored to tailor the properties of materials and to provide anchor points for the fabrication of hybrid structures. Herein, new insights into the role of the surfactant in functionalization reactions are described. Using the spontaneous reaction of WS₂ with chloroauric acid as a model reaction, the regioselective formation of gold nanoparticles on WS₂ is shown to be heavily dependent on the surfactant employed. A simple model is developed to explain the role of the chosen surfactant in this heterogeneous functionalization reaction. The surfactant coverage is identified as the crucial element that governs the dominant reaction pathway and therefore can severely alter the reaction outcome. This study shows the general importance of the surfactant choice and how detrimental or beneficial a certain surfactant can be to the desired functionalization.     

Antimicrobial Activities of Plant Extracts against Solanum tuberosum L. Phytopathogens

The purpose of the study was to select an environmentally friendly plant biopesticide to protect seed potatoes against phytopathogens. The scope included the evaluation of the antimicrobial activities of 22 plant water extracts, 22 water-glycol extracts, and 3 subcritical carbon dioxide extracts using the agar diffusion method against 10 potato phytopathogens. For the most effective extracts, minimal inhibitory concentration (MIC), chemical composition analysis by gas chromatography–mass spectrometry and in situ assays on seed potatoes were performed. Garlic water extract was finally selected as the most effective in phytopathogen growth inhibition, both in vitro and in situ, with MIC values ranging between 6.3–25 mg/mL. 5-Hydroxymethylfurfural was determined to be the main component of this extract (33.24%). Garlic water extract was proposed as a potential biopesticide against potato phytopathogens.     

Development of Improved High-Performance Liquid Chromatography Method for the Determination of Residual Caprylic Acid in Formulations of Human Immunoglobulins

Quality control of human immunoglobulin formulations produced by caprylic acid precipitation necessitates a simple, rapid, and accurate method for determination of residual caprylic acid. A high-performance liquid chromatography method for that purpose was developed and validated. The method involves depletion of immunoglobulins, the major interfering components that produce high background noise, by precipitation with acetonitrile (1:1, v/v). Chromatographic analysis of caprylic acid, preserved in supernatant with no loss, was performed using a reverse-phase C18 column (2.1 × 150 mm, 3 μm) as a stationary phase and water with 0.05% TFA–acetonitrile (50:50, v/v) as a mobile phase at a flow rate of 0.2 mL/min and run time of 10 min. The developed method was successfully validated according to the ICH guidelines. The validation parameters confirmed that method was linear, accurate, precise, specific, and able to provide excellent separation of peaks corresponding to caprylic acid and the fraction of remaining immunoglobulins. Furthermore, a 2⁴⁻¹ fractional factorial design was applied in order to test the robustness of developed method. As such, the method is highly suitable for the quantification of residual caprylic acid in formulations of human immunoglobulins for therapeutic use, as demonstrated on samples produced by fractionation of convalescent anti-SARS-CoV-2 human plasma at a laboratory scale. The obtained results confirmed that the method is convenient for routine quality control.     

Secretory Products in Petals of Centaurea cyanus L. Flowers: A Histochemistry,Ultrastructure, and Phytochemical Study of Volatile Compounds

(1) Background: Centaurea cyanus L. is a medicinal plant whose flowers are widely used in herbal medicine. The aim of the study was to localise flower tissues that are responsible for the production of secretory products in petals and to analyse the volatile compounds. The volatile compounds of the flowers of this species have not been investigated to date. (2) Methods: Light, fluorescence, scanning and transmission electron microscopy techniques were used in the study. Lipophilic compounds were localised in the tissues using histochemical assays. Volatile compounds were determined with the use of solid phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS). (3) Results: The study showed production of secretion in the petal parenchyma, whose ultrastructure has features of a secretory tissue. The lipophilic secretion was localised in the cells and intercellular spaces of the parenchyma and in the walls and surface of epidermal cells, where it accumulated after release through cuticle microchannels. Sesquiterpenes were found to constitute the main group of volatile compounds, with the highest content of β-caryophyllene (26.17%) and α-humulene (9.77%). (4) Conclusions: Given the presence of some volatile components that are often found in resins (caryophyllene, delta-cadinene) and the abundant secretion residues on the epidermal surface, we suppose that the C. cyanus secretion released by the flowers is a resinaceous mixture (oleoresin), which is frequently found in plants, as shown by literature data. This secretion may play an important role in the therapeutic effects of C. cyanus flowers.     

The Effect of Antiretroviral Therapy on SIRT1, SIRT3 and SIRT6 Expression in HIV-Infected Patients

Human Immunodeficiency Virus (HIV) infection and the chronic use of combined antiretroviral therapy (cART) may affect the occurrence of certain disturbances in the body. There is growing interest in sirtuins–enzymes involved in the regulation of many metabolic processes in the organism and in the pathogenesis of many diseases which also exhibit potential antiviral activity. The aim of the study was to investigate the connection of cART to the expression of Sirtuin 1 (SIRT1), Sirtuin 3 (SIRT3) and Sirtuin 6 (SIRT6) in HIV-infected men. The plasma levels of sirtuins were measured before and one year after cART, and related to HIV viral load, lymphocytes T CD4+ and CD8+ count as well as the applied cART. The levels of sirtuins in plasma were measured in HIV-infected patients (n = 53) and the control group (n = 35) by immunoassay methods. There were statistically significant (p < 0.05) differences between SIRT6 in the HIV-infected patients before therapy and in the subgroups, depending on the count of lymphocytes T CD8+. There were significant differences in the levels of SIRT1 depending on the applied treatment regimen. The obtained results indicate the most significant changes in the expression of SIRT6 in the course of HIV infection and suggest an influence of the type of cART on the level of SIRT1, which indicates its important role in the course of HIV.