Magnetic measurements of Fe-Ni-Nb-B and Fe-Co-Mo-Cu-B in the vicinity of the Curie temperature

The study of the transition between ferromagnetic and paramagnetic states has been investigated on selected metallic glass systems based on Fe-Ni-Nb-B and Fe-Co-Mo-Cu-B with T_C close to room temperature. Samples in the form of ribbons were prepared by planar flow casting and magnetostriction in parallel and perpendicular directions and saturation magnetostrictions have been determined on these samples in as-cast states together with hysteresis loops. In addition, a magneto-optic device for dynamic domain observation has been used for observation of domain structure. Magnetostriction measurements using direct method of measurement show the decrease of saturation magnetostriction towards zero upon approaching T_C. In paramagnetic state the field dependencies of magnetostriction in parallel and perpendicular configurations exhibit a linear dependence on the external magnetic field. In the transition region of temperatures the dependencies are a combination of ferromagnetic and paramagnetic field dependencies. The coercivity H_C in the materials investigated exhibits values below 20 A/m. The observed magnetic domains are typical for this class of amorphous alloys. The polarization in paramagnetic state increases gradually with increase in magnetizing field, reflecting the increasing amount of polarized regions.     

Histochemical and Phytochemical Analysis of Lamium album subsp. album L. Corolla: Essential Oil,Triterpenes, and Iridoids

The aim of this study was to conduct a histochemical analysis to localize lipids, terpenes, essential oil, and iridoids in the trichomes of the L. album subsp. album corolla. Morphometric examinations of individual trichome types were performed. Light and scanning electron microscopy techniques were used to show the micromorphology and localization of lipophilic compounds and iridoids in secretory trichomes with the use of histochemical tests. Additionally, the content of essential oil and its components were determined using gas chromatography-mass spectrometry (GC-MS). Qualitative analyses of triterpenes carried out using high-performance thin-layer chromatography (HPTLC) coupled with densitometric detection, and the iridoid content expressed as aucubin was examined with spectrophotometric techniques. We showed the presence of iridoids and different lipophilic compounds in papillae and glandular and non-glandular trichomes. On average, the flowers of L. album subsp. album yielded 0.04 mL/kg of essential oil, which was dominated by aldehydes, sesquiterpenes, and alkanes. The extract of the L. album subsp. album corolla contained 1.5 × 10⁻³ ± 4.3 × 10⁻⁴ mg/mL of iridoid aucubin and three triterpenes: oleanolic acid, β-amyrin, and β-amyrin acetate. Aucubin and β-amyrin acetate were detected for the first time. We suggest the use of L. album subsp. album flowers as supplements in human nutrition.     

Magnetic properties and macroscopic heterogeneity of FeCoNbB Hitperms

Nanocrystalline ribbons of Fe_81−xCo_xNb₇B₁₂ (where x ranges from 0 to 40.5 at%) Hitperm alloys have been investigated as to their basic magnetic properties and the influence of the macroscopic heterogeneity. Different crystalline share at surfaces compared with the volume average is observed by conversion electron Mössbauer spectroscopy (CEMS) and Mössbauer spectroscopy (MS), respectively. This marks the presence of macroscopic heterogeneity in these Hitperms. The heterogeneity is generally more significant in Ar-annealed samples than in the vacuum-annealed ones. The characteristic slant hysteresis loops (hard-ribbon-axis) are seen as a rule with few exceptions. An inspection of hysteresis loop response of resin potted samples shows that the surfaces bi-axially squeeze the ribbon interior in heterogeneous Hitperms when the ribbons cool down after annealing. Certain compositions show macroscopic viscous flow prior to crystallization so the heterogeneity gets another chance to induce anisotropy during annealing. The induction attains 1.5 T but saturates poorly due to the heterogeneity and the ensuing anisotropy. Moreover the heterogeneity appears to hamper the crystallization within the ribbon interior. Unlike Finemets, the density of these Hitperms show no pronounced trend with annealing.     

Functions related to convexity and smoothness of normed spaces

We introduce a few functions related to convexity and smoothness of normed spaces. Those functions turn out to be moduli of convexity or smoothness or play an intermediate role. We calculate the exact formulas for introduced functions in some classical Banach spaces. An application to geometry of normed spaces is also indicated.     

Cut-Free Ordinary Sequent Calculi for Logics Having Generalized Finite-Valued Semantics

The paper presents a method for transforming a given sound and complete n-sequent proof system into an equivalent sound and complete system of ordinary sequents. The method is applicable to a large, central class of (generalized) finite-valued logics with the language satisfying a certain minimal expressiveness condition. The expressiveness condition decrees that the truth-value of any formula φ must be identifiable by determining whether certain formulas uniformly constructed from φ have designated values or not. The transformation preserves the general structure of proofs in the original calculus in a way ensuring preservation of the weak cut elimination theorem under the transformation. The described transformation metod is illustrated on several concrete examples of many-valued logics, including a new application to information sources logics.     

The Effect of Hemp Cake (Cannabis sativa L.) on the Characteristics of Meatballs Stored in Refrigerated Conditions

Hemp cake, a by-product of cold pressing oil from hemp seeds, is a nutritious ingredient that could be used for the production of new or reformulated meat products. The aim of this study was to determine the influence of inclusion of 0.9%, 2.6%, 4.2%, and 7.4% (w/w) hemp cake (Cannabis sativa L.) on the physicochemical and textural properties, oxidation, and sensory acceptance of cooked and vacuum-packed meatballs during refrigerated storage. The addition of 7.4% hemp cake enhanced the amount of dry matter and reduced the content of water. Lightness (L*) and redness (a*) values reduced significantly with higher levels of hemp supplementation. Regardless of the amount of hemp additive, pH, color parameters did not differ significantly during the 12 days of storage. Hemp cake significantly decreased protein and lipid oxidation: the inhibitory effect of adding 7.4% hemp cake on protein carbonyl group formation and TBARS values reached 11.16% and 36.5%, respectively, after 10 days of storage. Sensory analysis revealed that meatballs prepared with 0.9% and 2.6% hemp cake gained higher overall scores. The results indicate that hemp cake, a material considered mainly as waste, may be destined for food purposes and be an alternative ingredient for the production of sustainable meat products.     

Surface Studies on Glass Powders Used in Commercial Glass-Ionomer Dental Cements

The surface properties of three commercial ionomer glass powders, i.e., Fuji IX, Kavitan Plus and Chemadent G-J-W were studied. Samples were analyzed by X-ray fluorescence spectroscopy (XRF), and the density was determined by gas pycnometry. Morphology was studied using scanning electron microscopy (SEM) and laser diffraction (LD) technique, whereas low-temperature nitrogen sorption measurements determined textural parameters like specific surface area and pore volume. Thermal transformations in the materials studied were evaluated by thermogravimetric analysis (TGA), which was carried out in an inert atmosphere between 30 °C and 900 °C. XRF showed that Fuji IX and Kavitan Plus powders were strontium-based, whereas Chemadent G-J-W powder was calcium-based. Powders all had a wide range of particle sizes under SEM and LD measurements. Specific surface areas and pore volumes were in the range 1.42–2.73 m²/g and 0.0029 to 0.0083 cm³/g, respectively, whereas densities were in the range 2.6428–2.8362 g/cm³. Thermogravimetric analysis showed that the glass powders lost mass in a series of steps, with Fuji IX powder showing the highest number, some of which are attributed to the dehydration and decomposition of the polyacrylic acid present in this powder. Mass losses were more straightforward for the other two glasses. All three powders showed distinct losses at around 780 °C and 835 °C, suggesting that similar dehydration steps occur in all these glasses. Other steps, which differed between glass powders, are attributed to variations in states of water-binding on their surfaces.     

Inverse Gas Chromatographic Characterization of Aluminosilicates as Fillers for Abrasive Articles

The surface properties of aluminosilicates (perlites and zeolites)—potential fillers in abrasive articles—have been examined by inverse gas chromatography. The dispersive component of the surface free energy ( $ \gamma_{\text{S}}^{\text{D}} $ ) and K _A and K _D describing the acidity and basicity, respectively, of the fillers were used to express the surface activity of examined materials. The Flory–Huggins parameter, $ \chi_{23}^{'} , $ characterized the interactions between polymer and filler, i.e., interactions between phenolic resin and filler. Zeolites were found to be materials with an active surface layer and relatively high ability to participate in filler–resin interactions. Therefore, they might be considered as potential “replacement material” for standard fillers. The IGC-derived values mentioned above provided useful information about the behavior of fillers during the manufacture and use of abrasive articles.     

Half-metallicity at the non-polar surfaces of rock-salt and zinc-blende MgN

We discuss the electronic properties of non-polar surfaces of MgN rock-salt and zinc-blende crystals. We studied the (001) surface of the rock-salt and the (110) surface of the zinc-blende MgN with the use of an ab initio full-electron linearized augmented plane wave method within density functional theory. The structural parameters of the two surfaces were optimized by relaxing the position of the atoms in the unit cells in the force directions. The results of the calculations indicate that both rock-salt MgN (001) and ZB MgN (110) demonstrate half-metallic properties. The zinc-blende MgN (110) surface is electronically more stable as a half-metal than the rock-salt MgN (001) surface. The magnetic properties of the two systems are tailored mainly by the spin-polarization of electrons of N atoms.     

Electrospray ionization collision induced dissociation of thiocarbocyanine and selenocarbocyanine dyes

The effect of the properties of sulphur and selenium atoms, the composition and location of substituents (―CH₃, ―OCH₃, ―C₂H₅, and ―C₃H₆―((N⁺Br^?)C₅H₅)), and the charge state on the collision induced dissociation (CID) behaviour of ions generated by electrospray ionization (ESI) of thiocarbocyanine and selenocarbocyanine dyes have been investigated. The results show that, for of all the examined singly charged ions, the main dissociation channel was related to the formation of distonic ions, generated as a result of cleavages within the dimethine bridge. In the case of doubly charged ions (with propyl‐pyridinium substituents), competition between fragmentation processes related to charges located at different nitrogen atoms has been observed. The S/Se replacement also has an impact on the CID behaviour of the examined carbocyanine dyes. On the basis of the performed CID MS/MS experiments, general rules for the CID of thiocarbocyanine and selenocarbocyanine dyes have been proposed.