Controlled Fabrication of Cd-Bi Nanoparticles via Sonochemical Method

IntroductionMetal or alloy nanoparticles,because of their con-spicuous physicochemical properties,have been widelyapplied to various fields such as electronics,catalysis,magnetism,and corrosion-resistant materialsfields[1—4].It has been estimated that the particle sizeand the properties of nanoparticles depend strongly onthe specific method of fabrication and the applied ex-periment conditions,which makes the controlled syn-thesis of nanomaterials become an increasingly activeand important ar…     

Nitric oxide-dependent pigment migration induced by ultraviolet radiation in retinal pigment cells of the crab Neohelice granulata

The purpose of this study was to verify the occurrence of pigment dispersion in retinal pigment cells exposed to UVA and UVB radiation, and to investigate the possible participation of a nitric oxide (NO) pathway. Retinal pigment cells from Neohelice granulata were obtained by cellular dissociation. Cells were analyzed for 30 min in the dark (control) and then exposed to 1.1 and 3.3 J cm⁻² UVA, 0.07 and 0.9 J cm⁻² UVB, 20 n m β-PDH (pigment dispersing hormone) or 10 μ m SIN-1 (NO donor). Histological analyses were performed to verify the UV effect in vivo . Cultured cells were exposed to 250 μ m L-NAME (NO synthase blocker) and afterwards were treated with UVA, UVB or β-PDH. The retinal cells in culture displayed significant pigment dispersion in response to UVA, UVB and β-PDH. The same responses to UVA and UVB were observed in vivo . SIN-1 did not induce pigment dispersion in the cell cultures. l-NAME significantly decreased the pigment dispersion induced by UVA and UVB but not by β-PDH. All retinal cells showed an immunopositive reaction against neuronal nitric oxide synthases. Therefore, UVA and UVB radiation are capable of inducing pigment dispersion in retinal pigment cells of Neohelice granulata and this dispersion may be nitric oxide synthase dependent.     

Ethylbenzene to chemicals: Catalytic conversion of ethylbenzene into styrene over metal-containing MCM-41

Isomorphously substituted (MeDM) and impregnated metal-containing MCM-41 (MeO_x/IM) catalysts, in which Me = Co, Cu, Cr, Fe or Ni, have been prepared. Structural and textural characterizations of the catalysts were performed by means of X-ray diffraction (XRD), chemical analysis, Raman spectroscopy, electron paramagnetic resonance (EPR), N₂ adsorption isotherms and temperature programmed reduction (TPR). Cu²⁺, Co²⁺, and Cr⁴⁺/Cr³⁺ species were found over the catalysts as cations incorporated in the MCM-41 structure (MeDM) or highly dispersed oxides on the surface (MeO_x/IM). The MeDM catalysts exhibited a good performance in the dehydrogenation of ethylbenzene with CO₂. However, MeO_x/IM catalysts had a low performance in styrene production (activity less than 15 × 10^?3 mmol h^?1 and selectivity for styrene less than 80%) due to the high reducibility of the metals species. However, Ni²⁺ or Fe³⁺ coordinated with the MCM-41 framework, as well as NiO_x and Fe₂O₃ extra-framework species, is continuously oxidized by the CO₂ to maintain the active sites for dehydrogenating ethylbenzene. Deactivation studies on the FeDM sample showed that Fe³⁺ species produced active sp² carbon compounds, which are removed by CO₂; the referred sample is catalytically selective for styrene and stable over 24 h of reaction. In contrast, highly active Ni²⁺ and Ni⁰ species produced a large amount of polyaromatic carbonaceous deposits from styrene, as identified by TPO, TG and Raman spectroscopy. An acid–base mechanism is proposed to operate to adsorb ethylbenzene and abstract the β-hydrogen. CO₂ plays a role in furnishing the lattice oxygen to maintain the Fe³⁺ active sites in the dehydrogenation of ethylbenzene to form styrene.     

Driving forces in substitution reactions of octahedral complexes: The influence of the competitive effect

The reaction of cis-[RuCl₂(P–P)(N–N)] type complexes (P–P = 1,4-bis(diphenylphosphino)butane or (1,1′-diphenylphosphino)ferrocene; N–N = 2,2′-bipyridine or 1,10-phenantroline) with monodentate ligands (L), such as 4-methylpyridine, 4-phenylpyridine and benzonitrile forms [RuCl(L)(P–P)(N–N)]⁺ species. Upon characterization of the isolated compounds by elemental analysis, ³¹P{¹H} NMR and X-ray crystallography it was found out that the type of the L ligand determines its position in relation to the phosphorus atom. While pyridine derivatives like 4-methylpyridine and 4-phenylpyridine coordinate trans to the phosphorus atom, the benzonitrile ligand (bzCN), a good π acceptor, coordinates trans to the nitrogen atom. A ³¹P{¹H} NMR experiment following the reaction of the precursor cis-[RuCl₂(dppb)(phen)] with the benzonitrile ligand shows that the final position of the entering ligand in the complex is better defined as a consequence of the competitive effect between the phosphorus atom and the cyano-group from the benzonitrile moiety and not by the trans effect. In this case, the benzonitrile group is stabilized trans to one of the nitrogen atoms of the N–N ligand. A differential pulse voltammetry experiment confirms this statement. In both experiments the [RuCl(bzCN)(dppb)(phen)]PF₆ species with the bzCN ligand positioned trans to a phosphorus atom of the dppb ligand was detected as an intermediate complex.     

Hydroxyl Radical Generation and DNA Nuclease Activity: A Mechanistic Study Based on a Surface‐Immobilized Copper Thioether Clip‐Phen Derivative

Coordination compounds of copper have been invoked as major actors in processes involving the reduction of molecular oxygen, mostly with the generation of radical species the assignment for which has, so far, not been fully addressed. In the present work, we have carried out studies in solution and on surfaces to gain insights into the nature of the radical oxygen species (ROS) generated by a copper(II) coordination compound containing a thioether clip‐phen derivative, 1,3‐bis(1,10‐phenanthrolin‐2‐yloxy)‐N‐(4‐(methylthio)benzylidene)propan‐2‐amine (2CP‐Bz‐SMe), enabling its adsorption/immobilization to gold surfaces. Whereas surface plasmon resonance (SPR) and electrochemistry of the adsorbed complex indicated the formation of a dimeric Cu^I intermediate containing molecular oxygen as a bridging ligand, scanning electrochemical microscopy (SECM) and nuclease assays pointed to the generation of a ROS species. Electron paramagnetic resonance (EPR) data reinforced such conclusions, indicating that radical production was dependent on the amount of oxygen and H₂O₂, thus pointing to a mechanism involving a Fenton‐like reaction that results in the production of OH^..     

Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

Influence of thermal fluctuations on interfacial electron transfer in functionalized TiO2 semiconductors

The influence of thermal fluctuations on the dynamics of interfacial electron transfer in sensitized TiO2-anatase semiconductors is investigated by combining ab initio DFT molecular dynamics simulations and quantum dynamics propagation of transient electronic excitations. It is shown that thermal nuclear fluctuations speed up the underlying interfacial electron transfer dynamics by introducing nonadiabatic transitions between electron acceptor states, localized in the vicinity of the photoexcited adsorbate, and delocalized states extended throughout the semiconductor material, creating additional relaxation pathways for carrier diffusion. Furthermore, it is shown that room-temperature thermal fluctuations reduce the anisotropic character of charge diffusion along different directions in the anatase crystal and make similar the rates for electron injection from adsorbate states of different character. The reported results are particularly relevant to the understanding of temperature effects on surface charge separation mechanisms in molecular-based photo-optic devices.     

TPR, TPO, and TPD examinations of Cu0.15Ce0.85O(2-y) mixed oxides prepared by co-precipitation, by the sol-gel peroxide route, and by citric acid-assisted synthesis

Temperature-programmed reduction (TPR), oxidation (TPO), and desorption (TPD) studies were performed on three copper-ceria mixed oxide samples having the same nominal composition, Cu0.15Ce0.85O(2-y), but prepared in three different ways: by co-precipitation, the sol-gel peroxide route, and the sol-gel citric acid route. The obtained results reveal that despite a drastic initial drop in specific surface area after consecutive redox cycles, the hydrogen consumption remains constant. This is because CuO is highly dispersed over the surface of CeO2 nanocrystallites and remains highly dispersed even after the agglomeration of CeO2 nanocrystallites in a denser secondary structure. The dispersed CuO is reduced to Cu(0) during the TPR, forming agglomerated metal particles on the surface of partially reduced CeO2. However, after subsequent temperature-programmed oxidation all the Cu(0) is oxidized back into CuO and redispersed over the CeO2 crystallites.     

Matching-pursuit/split-operator-Fourier-transform computations of thermal correlation functions

A rigorous and practical methodology for evaluating thermal-equilibrium density matrices, finite-temperature time-dependent expectation values, and time-correlation functions is described. The method involves an extension of the matching-pursuit/split-operator-Fourier-transform method to the solution of the Bloch equation via imaginary-time propagation of the density matrix and the evaluation of Heisenberg time-evolution operators through real-time propagation in dynamically adaptive coherent-state representations.