微米铜丝的低温力学性能测试

针对纤维材料变温环境力学性能测试的需要,在华中科技大学研制的纤维材料试验机的基础上引入了温控装置,从而实现纤维材料在高低温环境下的力学性能测试。采用该装置对不同直径微米铜丝在不同温度、不同拉伸速率条件下的力学性能开展实验研究,测试结果表明弹性模量和抗拉强度随温度的降低而线性增加,屈服强度的变化不太明显。另外,低温环境下微米铜丝的力学性能表现出与其直径相关的尺度效应,而这一现象在常温下一直没有观测到。最后,还研究了拉伸速率对微米铜丝的力学性能影响,结果表明,在现有装置的许用范围之内,拉伸速率对其力学性能的影响不大。     

A displaced-line velocity diagnostic and its application in a visualization engine

A technique for measuring three-dimensional velocity by imaging the displacement of a marked fluid line is described, together with its use in an automotive visualization engine. In a flow seeded with 2–3 μ phosphorescing particles, a line is excited by a UV laser beam, deformed by the local velocity field, and detected by stereo low-light-level video cameras. The derivation of velocity from digitized images is discussed and capabilities of the diagnostic are assessed. Some image data taken in the engine are shown and quantitative two-component velocity plots along the line are presented.     

Meltblown fibers: Influence of viscosity and elasticity on diameter distribution

Both melt viscosity (η_o) and elasticity (correlated here with the longest melt relaxation time λ₁) were found to control the diameter distribution of meltblown fibers. Fibers were formed by melt blowing binary polystyrene (PS) blends containing widely differing component molecular weights using a custom-built laboratory apparatus. Varying the concentration and molecular weight of a high molecular weight PS provided independent control over η_o and λ₁. These rheological parameters influence the average diameter (d_av) and the distribution of diameters (coefficient of variation, CV) of meltblown fibers in different ways. Increasing η_o leads to an increase in d_av but has little impact on CV. On the other hand, increasing λ₁ beyond a threshold value reduces CV while simultaneously increasing d_av. A one-dimensional slender-jet theoretical model with both upper convected Maxwell and Phan–Thien and Tanner constitutive equations was developed to investigate the influence of viscoelasticity and processing parameters on the properties of meltblown fibers. This model predicts a strong dependence of fiber diameter on the air shear stress and variations in fiber diameter with viscoelasticity that are in qualitative agreement with the experimental results. We believe these results suggest that carefully controlling the viscoelastic profile of polymers used in melt blowing is a viable approach for producing nanofibers with narrow fiber diameter distributions using current commercial equipment.     

Cycloadditions of Bifunctional Vinyl Ethers with Electrophilic Alkenes through Tetramethylene Zwitterion Intermediates

Bifunctional vinyl ethers react with electron‐poor alkenes to cyclobutanes in good yields. The second C?C bond reacted with neither the cyclobutane nor its zwitterion intermediate, even on heating. Cyclobutanes formed from ‘tetracyanoethylene’ ( 8 ) were transformed into tetrahydropyridines by reaction of the corresponding zwitterion with MeCN as the solvent. In contrast, cyclobutanes formed from dimethyl (dicyanomethylidene)propanedioate ( 9 ) did not react with MeCN, which is ascribed to diminished stabilization of the zwitterion intermediate, and increased steric effects. These results extend the classical studies of Huisgen and his co‐workers.     

ABA triblock copolymers with a ring‐opening metathesis polymerization/macromolecular chain‐transfer agent approach

Block copolymers containing polystyrene and polycyclooctene were synthesized with a ring‐opening metathesis polymerization/chain‐transfer approach. Polystyrene, containing appropriately placed olefins, was prepared by anionic polymerization and served as a macromolecular chain‐transfer agent for the ring‐opening metathesis polymerization of cyclooctene. These unsaturated polymers were subsequently converted to the corresponding saturated triblock copolymers with a simple heterogeneous catalytic hydrogenation step. The molecular and morphological characterization of the block copolymers was consistent with the absence of significant branching in the central polycyclooctene and polyethylene blocks [high melting temperatures (114–127 °C) and levels of crystallinity (17–42%)]. A dramatic improvement in both the long‐range order and the mechanical properties of a microphase‐separated, symmetric polystyrene–polycyclooctene–polystyrene block copolymer sample was observed after fractionation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 361–373, 2007     

Spectral analysis and multidimensional stability of traveling waves for nonlocal Allen-Cahn equation

In this paper, the spectrum of linearized operator about a traveling wave for the nonlocal Allen-Cahn equation is estimated and the result is applied to study multidimensional stability of planar waves.     

Polymeric cross-linked surface treatments for controlling block copolymer orientation in thin films

The orientation of cylinder-forming poly(styrene-block-methyl methacrylate) [P(S-b-MMA)] was investigated on two sets of polymeric surface treatments: 10 para-substituted polystyrene derivatives with <10 mol % poly(4-vinylbenzyl azide) and a series of poly(styrene-random-4-vinylbenzyl azide) [P(S-r-VBzAz)] copolymers with 5-100 mol % poly(4-vinylbenzyl azide). The copolymers were spin-coated to form thin films and then cross-linked by heating. The resulting films exhibited a range of surface tensions from 21 to 45 dyn/cm. Perpendicular orientation of P(S-b-MMA) cylinders was achieved with poly(p-bromostyrene) and all the [P(S-r-VBzAz)] copolymer surface treatments, most notably the homopolymer of poly(4-vinylbenzyl azide). Films made from these simple copolymers are as effective as random terpolymer alignment layers commonly made from both block monomers and a cross-linkable monomer.     

An adaptive control scheme for a continuous plant under Known output delay, unmodelled dynamics, and input saturation

This paper deals with robustness of adaptive control of continuoussystems subject to known output delay, input saturation, unmodelledlinear dynamics, and bounded disturbances. A simple gradient-typealgorithm with a relative deadzone is used. The relative deadzoneis built with an estimated contribution of the unmodelled dynamicsto the system output. The basic tool used for stability androbustness analysis is Gronwall's lemma.