Spectrophotometric studies on the zirconium complex of 2-(3,6-disulfo-8-hydroxynaphthylazo)-1,8-dihydroxynaphtualene-3, 6-disulfonic acid

Summary A chromotropic azo dye, DSNADNS, prepared from chromotropic acid and 1-amino-8-naphthol-3,6-disulfonic acid has been found to produce quantitative precipitation of zirconium in acid medium. The blue-violet complex formed is insoluble in all organic solvents commonly used for solvent extraction work, but is soluble in a number of liquid organic bases and solutions of ammonium salts in water showing pink to violet colouration. Spectrophotometric studies as to the nature of the complex in pyridine, triethanolamine ammonium acetate, oxalate and carbonate solutions and the analytical possibility of these solutions have been made. The complex appears to decompose in pyridine, ammonium acetate and ammonium oxalate solutions, but it is fairly stable in ammonium carbonate and triethanolamine solutions. The absorbance peaks of the dye in these solutions occur at 500 and 520 nm respectively, while the complex in triethanolamine and ammonium carbonate both shows absorbance maxima at 540 nm. The solution of the complex in these two solvents obeys Beer's law within a concentration range 4 to 25 mg of zirconium per litre. The molar absorbance coefficients of the complex in triethanolamine and ammonium carbonate are respectively 686 and 823, which indicate poor sensitivity. The solution of the complex in the former solvent is more stable than that in the latter and an analytical procedure for the spectrophotometric determination of zirconium, with little interference from foreign ions, may be developed with ease in the triethanolamine solution.

---

Zusammenfassung Ein Azofarbstoff der Chromotropsäure, DSNADNS, der aus Chromotropsäure und 1-Amino-8-naphthol-3,6-disulfonsäure dargestellt werden kann, ergibt mit Zirkonium in saurer Lösung eine quantitative Fällung. Der blauviolett gefärbte Komplex ist in allen üblichen organischen Lösungsmitteln unlöslich, löst sich jedoch in einigen flüssigen organischen Basen sowie wäßrigen Lösungen von Ammoniumsalzen mit rosa bis violetter Färbung. Die Lösungen des Komplexes in Pyridin, Triäthanolamin sowie in Ammoniumacetat, -oxalat und -carbonatlösungen und ihre analytische Verwendbarkeit werden spektrophotometrisch untersucht. In Pyridin sowie in Ammoniumacetat und -oxalatlösungen scheint sich der Komplex zu zersetzen, während er in Triäthanolamin und Ammoniumcarbonatlösungen ziemlich beständig ist. Das Absorptionsmaximum des Farbstoffs in diesen beiden Lösungsmitteln liegt bei 500 bzw. 520 nm, der Komplex weist in beiden Fällen ein Maximum bei 540 nm auf. Das Beersche Gesetz wird in beiden Lösungsmitteln von 4–25 mg Zr/l erfüllt. Der molare Absorptionskoeffizient beträgt 686 bzw. 823. Die Lösung des Komplexes in Triäthanolamin ist stabiler als in Ammoniumcarbonatlösung. Eine spektrophotometrische Bestimmung von Zirkonium, die nur wenig von Fremdionen gestört wird, könnte daher gut in Triäthanolaminlösung durchgeführt werden.

     

Combinatorial manifolds with complementarity

A simplicial complex is said to satisfy complementarity if exactly one of each complementary pair of nonempty vertex-sets constitutes a face of the complex. We show that if a d-dimensional combinatorial manifold M with n vertices satisfies complementarity then d=0, 2, 4, 8, or 16 with n=3d/2+3 and |M| is a “manifold like a projective plane”. Arnoux and Marin had earlier proved the converse statement.     

Characteristics of in-out intermittency in delay-coupled FitzHugh–Nagumo oscillators

We analyze a pair of delay-coupled FitzHugh–Nagumo oscillators exhibiting in-out intermittency as a part of the generating mechanism of extreme events. We study in detail the characteristics of in-out intermittency and identify the invariant subsets involved – a saddle fixed point and a saddle periodic orbit – neither of which are chaotic as in the previously reported cases of in-out intermittency. Based on the analysis of a periodic attractor possessing in-out dynamics, we can characterize the approach to the invariant synchronization manifold and the spiralling out to the saddle periodic orbit with subsequent ejection from the manifold. Due to the striking similarities, this analysis of in-out dynamics also explains in-out intermittency     

Method for vector characterization of polar liquids using frequency-domain spectroscopy

A device for performing vector transmission spectroscopy on aqueous and polar solvent specimens at terahertz frequencies is presented. The device enables the direct measurement of the complex dielectric function across the terahertz band using a Fourier transform IR spectrometer for lossy solutions. Using microfluidic sampling, specimen handling is straightforward and direct measurements on polar specimens are made possible. The method is scalable to longer or shorter wavelengths.     

Deformation and annealing behaviour of a low carbon high Mn TWIP steel microalloyed with Ti

ABSTRACT

A low carbon high Mn, Ti microalloyed dual phase TWIP steel has been processed through cold rolling and annealing. X-ray diffraction reveals the maximum austenite (≈92%) in HRACST sample whereas, the 50CD sample shows 29% ferrite. The microstructure of HRAC and HRACST samples reveal austenite grains with annealing twins and deformation induced ferrite (DIF). The higher amount of DIF along with deformation twins form during cold deformation. Annealing at 500°C shows recovery, whereas at 700°C shows partial recrystallisation and at 900°C reveals almost full recrystallisation. TEM microstructures of the 900°C for 30?min samples reveal annealing twins with TiC particle. Strong Brass {110}<112> and Goss{110}<001> texture components are observed in HRAC, HRACST and 50CD samples. Goss Twin (GT) {113}<332> and Copper Twin (Cu-T) {552}<115> components are observed in 50CD sample. Addition of Ti results in an average grain size of 20?μm. Maximum YS (1176?MPa) and UTS (1283?MPa) values with the lowest ductility of 11% have been obtained for the 50CD sample which is related to the formation of extensive deformation twin and a higher fraction of DIF. 700°C-30?min and 700°C-60?min samples show an increase in ductility (23% and 34%, respectively) with a marginal decrease in tensile strength (1054?MPa). Annealing at 900°C shows ductility restoration up to 60% with higher tensile strength compared to HRACST sample. Ductile fracture of HRAC and HRACST samples transform to brittle fracture in the 50CD sample. Annealing at 900°C for 30?min shows ductile fracture with some (Fe, Mn)S and TiC particles.     

Synthesis of nanocrystalline and mesoporous zinc sulphide from a single precursor Zn(SOCCH3)2Lut2 complex

We report the formation of mesoporous zinc sulphide, composed by the fine network of nanoparticles, which was formed via a single precursor Zn(SOCCH₃)₂Lut₂ complex. The complex was chemically synthesized using zinc carbonate basic, 3,5-lutidine and thioacetic acid, in air. The metal precursor complex was characterized using different conventional techniques. Thermogravimetric analysis (TGA) result indicates that the decomposition of the complex starts at 100 °C and continues up to 450 °C, finally yielding ZnS. ZnS nanocrystals were characterized by powder X-ray diffraction (XRD) technique, field emission scanning electron microscopy (FESEM), N₂-sorption isotherm, UV-vis spectroscopy and photoluminescence (PL) spectroscopy. The grain diameter of nanocrystals was found to be 4-5 nm. The material followed Type-IV N₂-sorption isotherm, which is the characteristic of mesoporous materials. The band gap energy, as obtained from optical measurements was around 3.8 eV.     

Study of photophysical properties of capped CdS nanocrystals

Here, we have examined the role of capping agent on the optical properties of CdS nanoparticles by steady-state and time-resolved photoluminescence (PL) spectroscopy. The estimated particles sizes are 3.45, 2.5 and 2.39 nm for uncapped, capped with silica (SiO₂) and thiosalicylic acid (TSA), respectively. The absorption and emission spectra show a clear blue shift to shorter wavelengths in presence of TSA- and SiO₂-capped nanoparticles. It is found that the average decay time 〈τ〉 are 6.24, 4.54 and 2.84 ns for uncapped, capped with SiO₂ and TSA nanoparticles, respectively. Our analysis suggests that the hole or the electron is trapped on thiol molecule of TSA or hydroxyl group of SiO₂, then radiative recombination of the electron and hole is delayed, resulting in strong quenching of PL efficiency.