Thermal and optical studies on induced smectic phases of inter molecular hydrogen bonded liquid crystals between decyloxy benzoic acid and citric acid

Hydrogen bonded liquid crystal complex (HBLC) is prepared from mesogenic 4-decyloxy benzoic acid (10OBA) and aliphatic nonmesogenic citric acid (CA). Liquid crystal (LC) phases are investigated by polarizing optical microscopy (POM), differential scanning calorimetry (DSC) studies. Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance spectroscopy (NMR) validate the intermolecular complementary, cyclic type of hydrogen bond (HB) and molecular environment in the designed HBLC complex. Mesomorphic phases like nematic, smectic X (Sm X) and smectic G (Sm G) are characterized by various textures and using different techniques such as POM, DSC and optical tilt angle measurements. Thermal span width and thermal stability factor for the observed phase is calculated. The complexes are prepared in different mole ratio and their corresponding influences on the phase transitions are discussed. Also it is observed that the HB units play a vital role in stabilizing the new Sm X phase. The variation in thermal stability of smectic phases due to the influence of aromatic cores and length of end chain in the different mole ratio of the present HBLC complexes are also discussed. The variation of tilt angle with respect to temperature in the smectic phase has been experimentally calculated and analyzed. The lowered melting and clearing transition temperatures and extended thermal span width in the Sm X phase are also reported.     

Adsorption of Basic Magenta II onto H2SO4 activated immature Gossypium hirsutum seeds: Kinetics,isotherms, mass transfer,thermodynamics and process design

The adsorption of Basic Magenta II onto H₂SO₄ activated immature Gossypium hirsutum seeds was analysed using Ho, modified Freundlich, Sobkowsk–Czerwi, Blanchard, Elovich, Avrami, and modified Ritchie kinetic models by nonlinear regression-sum of normalized errors analysis. The goodness of fit was evaluated with coefficient of determination and root mean square error. The good agreement of experimental data to Avrami second-order model indicated that the mechanism of adsorption followed multiple kinetic orders. The Avrami second-order mechanism was applied to predict the rate constant of sorption and the equilibrium capacity and subsequently the obtained equilibrium adsorption capacities were utilized to find the equilibrium concentrations. Langmuir, Freundlich, Temkin, Sips and Hill isotherms were investigated to understand the nature of adsorption with the help of nonlinear regression analysis. Both Sips and Hill isotherms were best fit to the adsorption equilibrium data showing the homogeneous adsorption on the heterogeneous surface of carbon and the positive co-operative manifestations of the Basic Magenta II molecules. The mass transfer study depicted the details such as mass transfer coefficient, intra-particle diffusion rate, pore diffusion coefficient, and film diffusion coefficient. The adsorption process was found to be controlled by film diffusion. The thermodynamic parameters like, Gibbs free energy change, enthalpy change, entropy change and isosteric heat of adsorption confirmed the endothermic, feasible and spontaneous nature of adsorption. A single stage batch adsorber was designed using Sips isotherm constants to estimate the amount of carbon required for desired purification.     

Air-stable racemization catalysts for the dynamic kinetic resolution of secondary alcohols

The substitution of a carbonyl ligand with PPh(3) in cyclopentadienylruthenium dicarbonyl complexes produces a new class of recyclable alcohol racemization catalysts. The catalysts are active at room temperature under aerobic conditions in the presence of silver oxide. Furthermore, the catalysts are compatible with the use of a lipase and isopropenyl acetate for the dynamic kinetic resolution (DKR) of secondary alcohols under ambient conditions.     

Untargeted Metabolomic Approach to Determine the Regulatory Pathways on Salicylic Acid-Mediated Stress Response in Aphanamixis polystachya Seedlings

Plants thrive under abiotic and biotic stress conditions with the changes in phytohormones like salicylic acid (SA), resulting in the synthesis of secondary metabolites. The present study determines the response of plants in producing secondary metabolites towards different SA concentrations at varying time intervals. Liquid chromatography-mass spectrometry-based metabolomics studies in Aphanamixis polystachya (Wall.) Parker seedlings are grown at 10 mM, 50 mM, and 100 mM SA concentrations, showed the differential expression of metabolites towards the stress. Alkaloids like amaranthin showed a 15-fold increase on the second day, and analog of androvinblastin showed a 20-fold increase on the sixth day in 10 mM SA compared with other groups. Flavanoid cyanidin 3-3 glucosyl was found to be with a 22-fold increment along with terpenoids betavulgaroside (18-fold), asiaticoside (17-fold), mubenin B (20-fold), and deslanoside (22-fold) increment in 50 mM SA on the sixth day. The shock exerted by 100 mM was too harsh, and the lowered metabolite production level was insufficient for the seedlings to survive at this higher SA condition. Arrangement of stressed groups using Pearson correlation studies, principal component analysis, and partial least square analysis placed 10 mM SA and controlled group closer and 50 mM SA and 100 mM SA groups closer to each other. The study observed that SA regulates metabolites that mediate biotic stress responses at low concentrations, and higher concentrations regulate abiotic stress regulating metabolites.     

Growth of Zn3As2 on GaAs by liquid phase epitaxy and their characterization

Zn₃As₂ epitaxial layers were grown on GaAs (1 0 0) substrates by liquid phase epitaxy (LPE) using Ga as the solvent. Zinc mole fraction in the growth melt was varied from 1.07×10^?2 to 6×10^?2. X-ray diffraction spectrum exhibits a sharp peak at 43.3° characteristic of Zn₃As₂ crystalline layer. The peak intensity increases with increase in zinc mole fraction in the growth melt. The compositions of the as-grown Zn₃As₂ layers were confirmed by energy dispersive X-ray (EDX) analysis. Surface morphology was studied using scanning electron microscopy (SEM) and the thickness of the epilayers was also determined. The Hall measurements at 300 K indicate that Zn₃As₂ epilayers are unintentionally p-doped. With an increase of zinc mole fraction in the growth melt, carrier concentration increases and carrier mobility decreases. Infrared optical absorption spectroscopy showed a sharp absorption edge at 1.0 eV corresponding to the reported band gap of Zn₃As₂.     

Synthesis, characterization and fluorescence studies of novel bi-phenyl based acrylate and methacrylate

4-[(1E)-3-(biphenyl-4-yl)buta-1,3-dien-1-yl]phenyl prop-2-enoate (ACH) and 4-[(1E)-3-(biphenyl-4-yl)buta-1,3-dien-1-yl]phenyl 2-methylprop-2-enoate (MCH) was synthesized from biphenyl in three steps and their structures were confirmed by elemental analysis, IR, NMR (1H, 13C, DEPT135, 1H-1H COSY, 1H-13C HSQC and 1H-13C HMBC) spectroscopic techniques. In this present study, various physicochemical characteristics we demonstrate solubility, color, absorbance and fluorescence property of novel biphenyl based acrylate and methacrylate measured in different solvents like benzene, dichloromethane, tetrahydrofuran, acetonitrile, dimethylsulfoxide and ethanol.     

(±)‐2‐Aryl‐2,3‐dihydro‐4(1H)‐quinolinones by a tandem reduction–Michael addition reaction

An efficient synthesis of (±)‐2‐aryl‐2,3‐dihydro‐4(1H)‐quinolinones has been developed from chalcones prepared from 2′‐nitroacetophenone and a series of substituted benzaldehydes. The cyclization sequence is initiated by reduction of the nitro group under dissolving metal conditions using iron powder in concentrated hydrochloric acid. Milder conditions, using acetic acid or acetic acid–phosphoric acid as the reaction medium, were less satisfactory. Procedural details as well as a mechanistic discussion and reaction optimization studies are presented. J. Heterocyclic Chem., (2011).     

Studies on the effect of ammonia flow rate induced defects in gallium nitride grown by MOCVD

Gallium nitride (GaN) epitaxial layers were grown with different V/III ratios by varying the ammonia (NH₃) flow rate, keeping the flow rate of the other precursor, trimethylgallium (TMG), constant, in an MOCVD system. X-ray rocking curve widths of a (1 0 2) reflection increase with an increase in V/III ratio while the (0 0 2) rocking curve widths decrease. The dislocation density was found to increase with an increase in ammonia flow rate, as determined by hot-wet chemical etching and atomic force microscopy. 77 K photoluminescence studies show near band emission at 3.49 eV and yellow luminescence peaking at 2.2 eV. The yellow luminescence (YL) intensity decreases with an increase in V/III ratio. Positron annihilation spectroscopy studies show that the concentration of Ga-like vacancies increases with an increase in ammonia flow rate. This study confirms that the yellow luminescence in the GaN arises due to deep levels formed by gallium vacancies decorated with oxygen atoms.     

Selective area growth of GaInNAs/GaAs by MOVPE

Selective area growth (SAG) of GaInNAs/GaAs systems has been studied by metalorganic vapor-phase epitaxy (MOVPE) for the first time. This also includes a comparative study of SAG of the GaInAs/GaAs. The patterns consisted of various filling factors (F). The band gap changes and the growth morphology have been investigated. A red-shift observed for SAG GaInAs is 100 nm with respect to the planar GaInAs which can be attributed to both In enrichment and quantum well (QW) thickness enhancement. Selectively grown GaInNAs structures exhibit a maximum wavelength of 1.3 μm, corresponding to a red-shift of 80 nm with respect to the planar GaInNAs. Atomic force microscopy (AFM) scans reveal a three-dimensional growth behaviour for SAG GaInNAs unlike SAG GaInAs. This can be related to a certain amount of phase separation or strain that are often the signatures of N incorporation. The cathodoluminescence (CL) intensities (spectral line width) for SAG GaInNAs are larger (smaller) than those for SAG GaInAs at low F's but smaller (larger) at high F's. This indicates that at low F's, GaInAs has degraded due to very high strain but certain amount of strain compensation occurs in GaInNAs.