La2O3 promotional effect to Co3O4/γ-Al2O3 catalyst in the oxidative dehydrogenation of ethylbenzene with CO2 as soft oxidant

Co₃O₄/γ-Al₂O₃ catalysts with variable Co₃O₄ loadings (5–20 wt%) and deposition of 15% Co₃O₄ on La₂O₃/γ-Al₂O₃ were prepared by wet impregnation method. La₂O₃-γ-Al₂O₃ support with variable composition of La₂O₃ (2–6 wt%) were prepared by co-precipitation method. All the catalysts were tested for oxidative dehydrogenation of ethylbenzene with CO₂ as soft oxidant. Among the Co₃O₄/γ-Al₂O₃ catalysts, 15% Co₃O₄/γ-Al₂O₃ has shown good performance and hence this catalyst has been chosen to investigate the effect of La₂O₃ species. CO₂ pulse chemisorption data indicate more amount of CO₂ uptake over 15% Co₃O₄/4%La₂O₃/γ-Al₂O₃ catalyst which clearly indicates that this catalyst exhibits good performance in ethylbenzene dehydrogenation with CO₂ as soft oxidant because of reverse water gas shift reaction. Temperature programmed reduction studies indicate that the Co₃O₄ catalysts follow two step reduction mechanism from Co₃O₄ to CoO and then to Co and La₂O₃ promotional effect is visible through facile reduction of Co₃O₄ species. La₂O₃ doping has a vital influence in getting enhanced ethylbenzene conversion, styrene yield and alleviates catalyst deactivation compared to that of unpromoted Co₃O₄/γ-Al₂O₃ catalyst. TGA studies indicate the presence low amount coke deposition during time-on-stream over 15% Co₃O₄/4%La₂O₃/γ-Al₂O₃ catalyst compared to 15% Co₃O₄/γ-Al₂O₃ catalyst.     

Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizations

The overall objective of this investigation is to achieve high‐performance membranes with respect to flux and rejection characteristics, with an interplay of blending polymers having desired qualities. Thus, cellulose diacetate and polyethersulfone as candidate materials, in the presence of polyethylene glycol 600 as a pore forming agent, were blended in 100/0, 95/5, 90/10, 85/15, 80,20 and 75/25% compositions using N,N′‐dimethylformamide as solvent and membranes were prepared by the phase inversion technique. Polymer blend composition, additive concentration, and casting and gelation conditions were standardized for the preparation of asymmetric membranes with various pore statistics and morphology. These blend membranes were characterized for compaction in ultrafiltration experiments at 414 kPa pressure in order to attain steady state flux and is reached within 4–5 hr. The pure water flux was measured at 345 kPa pressure and is determined largely by the composition of polyethersulfone and additive concentration. The flux was found to reach the highest values of 66.5 and 275 1/(cm² hr) at 0 and 10 wt% additive concentrations respectively, at 25% SPS content of the blend. Membrane hydraulic resistance derived by measuring water flux at various transmembrane pressure and by using an algorithm was found to be inversely proportional to pure water flux. Water content is estimated by simple drying and weighing procedures and found proportional to pure water flux for all the membranes. The molecular weight cut‐offs (MWCOs) of different membranes were determined with proteins of different molecular weights and found to vary from 20–69 kDa (globular proteins) depending on the PEG and SPS content in the casting dope. Skin surface porosity of the membranes were analyzed by scanning the frozen membrane samples using scanning electron microscopy (SEM) at different magnifications. The surface porosity is in direct correlation to the MWCO derived from solute retention experiments. Copyright © 2004 John Wiley & Sons, Ltd.     

The intramolecular asymmetric Pauson-Khand cyclization as a novel and general stereoselective route to benzindene prostacyclins: synthesis of UT-15 (treprostinil)

A general and novel solution to the synthesis of biologically important stable analogues of prostacyclin PGI(2), namely benzindene prostacyclins, has been achieved via the stereoselective intramolecular Pauson-Khand cyclization (PKC). This work illustrates for the first time the synthetic utility and reliability of the asymmetric PKC route for synthesis and subsequent manufacture of a complex drug substance on a multikilogram scale. The synthetic route surmounts issues of individual step stereoselectivity and scalability. The key step in the synthesis involves efficient stereoselection effected in the PKC of a benzoenyne under the agency of the benzylic OTBDMS group, which serves as a temporary stereodirecting group that is conveniently removed via benzylic hydrogenolysis concomitantly with the catalytic hydrogenation of the enone PKC product. Thus the benzylic chiral center dictates the subsequent stereochemistry of the stereogenic centers at three carbon atoms (C(3a), C(9a), and C(1)).     

Diacetoxyiodobenzene mediated one-pot synthesis of diverse carboxamides from aldehydes

A novel, one-pot, and highly facile protocol has been devised for an easy access of a series of novel glycosyl carboxamides from aldehydes using diacetoxyiodobenzene in the presence of ionic liquid at ambient temperature.     

Urea and thiourea derivatives of 3-(trifluoromethyl)-5,6,7,8-tetrahydro-[1, 2, 4]triazolo[4,3-a]pyrazine: Synthesis,characterization, antimicrobial activity and docking studies

Abstract

An efficient and robust synthetic procedure was developed primarily for the synthesis of a precursor compound; 3-(trifluoromethyl)-5,6,7,8-tetrahydro-[1, 2, 4]triazolo[4,3-a]pyrazine (11), from 2-chloropyrazine (7) through the chemical transformations such as hydrazine substitution, trifluoroacetyl group induction, cyclization and pyrazine ring reduction. A new series of urea derivatives 13a-e and thiourea derivatives 13f-j of compound 11 have been synthesized and the structures of all the compounds were confirmed using spectroscopic analyses such as IR, ¹H NMR, ¹³C NMR, LC-MS and HRMS. The newly synthesized compounds were screened for their in vitro antimicrobial activity against five bacteria and two fungi, in which compounds 13d, 13i and 13j displayed potential activity against bacterial strains and 13a, 13d, 13g and 13j against fungal strains with the MIC values in the range of 6.25–25.0 µg/mL. An overall comparison of the activity results revealed that thiourea derivatives contain better activity than that of urea compounds. Molecular docking studies on poly (ADP-ribose) polymerase 15 (ARTD7, BAL3) demonstrated that all the synthesized compounds possess significant binding energies (-8.1 to -9.8?kcal/mol) with no adverse effect in the active site of protein.     

Synthesis and preliminary investigations of the siRNA delivery potential of novel, single-chain rigid cationic carotenoid lipids

The success of nucleic acid delivery requires the development of safe and efficient delivery vectors that overcome cellular barriers for effective transport. Herein we describe the synthesis of a series of novel, single-chain rigid cationic carotenoid lipids and a study of their preliminary in vitro siRNA delivery effectiveness and cellular toxicity. The efficiency of siRNA delivery by the single-chain lipid series was compared with that of known cationic lipid vectors, 3β-[N-(N',N'-dimethylaminoethane)carbamoyl]-cholesterol (DC-Chol) and 1,2-dimyristoyl-sn-glyceryl-3-phosphoethanolamine (EPC) as positive controls. All cationic lipids (controls and single-chain lipids) were co-formulated into liposomes with the neutral co-lipid, 1,2-dioleolyl-sn-glycerol-3-phosphoethanolamine (DOPE). Cationic lipid-siRNA complexes of varying (+/-) molar charge ratios were formulated for delivery into HR5-CL11 cells. Of the five single-chain carotenoid lipids investigated, lipids 1, 2, 3 and 5 displayed significant knockdown efficiency with HR5-CL11 cells. In addition, lipid 1 exhibited the lowest levels of cytotoxicity with cell viability greater than 80% at all (+/-) molar charge ratios studied. This novel, single-chain rigid carotenoid-based cationic lipid represents a new class of transfection vector with excellent cell tolerance, accompanied with encouraging siRNA delivery efficiency.     

Development and validation of liquid chromatography-mass spectrometric method for simultaneous determination of moxifloxacin and ketorolac in rat plasma: application to pharmacokinetic study

A highly sensitive, selective and rapid liquid chromatography–electrospray ionization mass spectrometry (LC‐MS) method has been developed and validated for simultaneous determination of moxifloxacin (MFX) and ketorolac (KTC) in rat plasma. Gemifloxacin (GFX) was used as an internal standard (IS). A simple protein precipitation method was used for the extraction of analytes from rat plasma. Effective chromatographic separation of MFX, KTC and GFX was achieved on a Kromasil C₁₈ column (100 × 4.6 mm, 5 µm) using a mobile phase consisting of acetonitrile–10 mm ammonium acetate (pH 2.5)–0.1% formic acid (50:25:25) in an isocratic elution, followed by detection with positive ion electrospray ionization mass spectrometry using target ions of [M + H]⁺ at m/z 402 for MFX, m/z 256 for KTC and m/z 390 for GFX in selective ion recording mode. The method was validated over the calibration range of 5–100 ng/mL for MFX and 10–6000 ng/mL for KTC. The method demonstrated good performances in terms of intra‐ and inter‐day precision (0.97–5.33%) and accuracy (93.91–101.58%) for both MFX and KTC, including lower and upper limits of quantification. The recoveries from spiked control samples were >75% for MFX and >79% for KTC. The matrix effect was found to be negligible and the stability data were within acceptable limits. Further, the method was also successfully applied to a single‐dose pharmacokinetic study in rats. This method can be extended to measure plasma concentrations of both drugs in human to understand drug interaction and adverse effects. Copyright © 2012 John Wiley & Sons, Ltd.