Sunlight assisted solvent free synthesis of tert-butylperesters

Abstract

A green and efficient methodology has been developed for the direct conversion of aryl aldehydes to the corresponding tert-butyl peresters. The reaction has been carried out in absence of any solvent and the sunlight is used as the green source of energy. In this reaction tetrabutylammonium iodide (TBAI) acts as the mild organo catalyst and tert-butyl hydroperoxide (TBHP) serve as the source of tert-butyl group.     

DAPPA grafted polymer: an efficient solid phase extractant for U(VI), Th(IV) and La(III) from acidic waste streams and environmental samples

A new class of polymeric resin has been synthesized by grafting Merrifield chloromethylated resin with (dimethyl amino-phosphono-methyl)-phosphonic acid (MCM-DAPPA), for the preconcentration of U(VI), Th(IV) and La(III) from both acidic wastes and environmental samples. The various chemical modification steps involved during grafting process are characterized by FT-IR spectroscopy, ³¹P and ¹³C-CPMAS (cross-polarized magic angle spin) NMR spectroscopy and CHNS/O elemental analysis. The water regain capacity data for the grafted polymer are obtained from thermo-gravimetric (TG) analysis. The influence of various physico-chemical parameters during the quantitative extraction of metal ions by the resin phase are studied and optimized by both static and dynamic methods. The significant feature of this grafted polymer is its ability to extract both actinides and lanthanides from high-level acidities as well as from near neutral conditions. The resin shows very high sorption capacity values of 2.02, 0.89 and 0.54 mmol g⁻¹ for U(VI), 1.98, 0.63 and 0.42 mmol g⁻¹ for Th(IV) and 1.22, 0.39 and 0.39 mmol g⁻¹ for La(III) under optimum pH, HNO₃ and HCl concentration, respectively. The grafted polymer shows faster phase exchange kinetics (<5 min is sufficient for 50% extraction) and greater preconcentration ability, with reusability exceeding 20 cycles. During desorption process, all the analyte ions are quantitatively eluted from the resin phase with >99.5% recovery using 1 M (NH₄)₂CO₃, as eluent. The developed grafted resin has been successfully applied in extracting Th(IV) from high matrix monazite sand, U(VI) from sea water and also U(VI) and Th(IV) from simulated nuclear spent fuel mixtures. The analytical data obtained from triplicate measurements are within 3.9% R.S.D. reflecting the reproducibility and reliability of the developed method.     

Synthesis and antimicrobial activity of N-(substituted)-N'-(2,3-dihydro-2-oxido-5-benzoyl-1H-1,3,2-benzodiazaphosphol-2-yl) ureas

N-(substituted)-N'-(2,3-dihydro-5-benzoyl-2-oxido-1H-1,3,2-benzodiazaphosphol-2-yl) ureas were synthesized by reacting 3,4-diaminobenzophenone (4) with different chlorides of carbamidophosphoric acids (3) in the presence of triethylamine at 40-45 degrees C. Their 1H-, 13C- and 31P-NMR spectral data are discussed. The title compounds were screened for antifungal and antibacterial activity against the fungi Aspergillus niger and Fusarium solani and bacteria Escherichia coli and Staphylococcus aureus. These compounds showed higher antibacterial activity when compared with antifungal activity.     

Synthesis, Spectroscopic Characterization, and Structural Studies of Bis(&mgr;-sulfido)bis[{O,O-dialkyl (alkylene) dithiophosphato}oxomolybdenum(V)] Complexes. Crystal Structures of Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2), Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5), and Mo(2)O(3)[S(2)P(OPh)(2)](4)

A series of new complexes, Mo(2)O(2)S(2)[S(2)P(OR)(2)](2) (where R = Et, n-Pr, i-Pr) and Mo(2)O(2)S(2)[S(2)POGO](2) (where G = -CH(2)CMe(2)CH(2)-, -CMe(2)CMe(2)-) have been prepared by the dropwise addition of an ethanolic solution of the ammonium or sodium salt of the appropriate O,O-dialkyl or -alkylene dithiophosphoric acid, or the acid itself, to a hot aqueous solution of molybdenum(V) pentachloride. The complexes were also formed by heating solutions of Mo(2)O(3)[S(2)P(OR)(2)](4) or Mo(2)O(3)[S(2)POGO](4) species in glacial acetic acid. The Mo(2)O(2)S(2)[S(2)P(OR)(2)](2) and Mo(2)O(2)S(2)[S(2)POGO](2) compounds were characterized by elemental analyses, (1)H, (13)C, and (31)P NMR, and infrared and Raman spectroscopy, as were the 1:2 adducts formed on reaction with pyridine. The crystal structures of Mo(2)O(2)S(2)[S(2)P(OEt(2))](2), Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5), and Mo(2)O(3)[S(2)P(OPh)(2)](4) were determined. Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2) (1) crystallizes in space group C2/c, No. 15, with cell parameters a = 15.644(3) ?, b = 8.339(2) ?, c = 18.269(4) ?, beta = 103.70(2) degrees, V = 2315.4(8) ?(3), Z = 4, R = 0.0439, and R(w) = 0.0353. Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5) (6) crystallizes in space group P&onemacr;, No. 2, with the cell parameters a = 12.663(4) ?,b = 14.291(5) ?, c = 9.349(3) ?, alpha = 100.04(3) degrees, beta = 100.67(3) degrees, gamma = 73.03(3) degrees V = 1557(1) ?(3), Z = 2, R = 0.0593, and R(w) = 0.0535. Mo(2)O(3)[S(2)P(OPh)(2)](4) (8) crystallizes in space group P2(1)/n, No. 14, with cell parameters a = 15.206(2)?, b = 10.655(3)?, c = 19.406(3)?, beta = 111.67(1) degrees, V = 2921(1)?(3), Z = 2, R = 0.0518, R(w) = 0.0425. The immediate environment about the molybdenum atoms in 1 is essentially square pyramidal if the Mo-Mo interaction is ignored. The vacant positions in the square pyramids are occupied by two pyridine molecules in 6, resulting in an octahedral environment with very long Mo-N bonds. The terminal oxygen atoms in both 1 and 6 are in the syn conformation. In 8, which also has a distorted octahedral environment about molybdenum, two of the dithiophosphate groups are bidentate as in 1 and 6, but the two others have one normal Mo-S bond and one unusually long Mo-S bond.     

Raman study of SO2 at high pressure: aggregation,phase transformations,and photochemistry

We report Raman measurements made on SO₂ in a diamond cell up to 75 kbar showing two new phases, solid II and solid III, which differ from known, zero-pressure solid I. Spectra indicate that SO₂ molecules aggregate in solid III to possibly form a cyclical trimer; solid III is shown to be photochemically active to blue radiation.     

A facile synthesis and highly atom economic 1,3-dipolar cycloaddition of hexahydropyrido[3,4-c][1,5]benzothiazepines with nitrile oxide: stereoselective formation of hexahydro[1,2,4]oxadiazolo[5,4-d]pyrido[3,4-c][1,5]benzothiazepines

A series of new 2-methyl-11-aryl-4-[(E)-arylmethylidene]-1,2,3,4,11,11a-hexahydropyrido[3,4-c][1,5]benzothiazepines were obtained by the reaction of o-aminothiophenol and (E)-1-methyl-3,5-bis(arylidene)-4-piperidones in the presence of a catalytic amount of acetic acid under solvent-free microwave irradiation. These dipolarophiles undergo a highly atom economic 1,3-dipolar cycloaddition with nitrile oxide to afford a series of novel 6-methyl-1-phenyl-8-aryl-4-[(E)-arylmethylidene]-4,5,6,7,7a,8-hexahydro[1,2,4]oxadiazolo[5,4-d]pyrido[3,4-c][1,5]benzothiazepines stereoselectively.     

Polymerization in lyotropic liquid crystals. I. Change of structure during polymerization

Polymerization was made at 60°C in a lyotropic liquid crystal of sodium undecenoate and water. The liquid crystalline structure prior to polymerization was identified by optical microscopy and low-angle x-ray diffraction as an array of hexagonal closely packed cylinders with the hydrophobic part of the soap in the center of the cylinders. During polymerization the structure became isotropic at 60°C. Cooling to 20°C transformed the structure to a lamellar liquid crystal–a reversible transition. The structure of the lamellar phase was interpreted as a polyethylene backbone from which deformed decanoate chains reached toward the aqueous layer. Molecular models showed the model to accept head-tail, head-head, and tail-tail configurations in cis and trans conformations with the exception of the cis tail-tail configuration.     

New environmentally friendly solvent free synthesis of dihydropyrimidinones catalysed by N-butyl-N,N-dimethyl-α-phenylethylammonium bromide

N-Butyl-N,N-dimethyl-α-phenylethylammonium bromide catalyzes efficiently the three component condensation reaction of an aromatic aldehyde, a β-keto ester and urea/thiourea under solvent free conditions at 100°C to afford the corresponding dihydropyrimidinone in high yield.