New method for determination of (E)-resveratrol in wine based on microextraction using packed sorbent and ultra-performance liquid chromatography

An ultra-fast and improved analytical methodology based on microextraction by packed sorbent (MEPS) combined with ultra-performance LC (UPLC) was developed and validated for determination of (E)-resveratrol in wines. Important factors affecting the performance of MEPS such as the type of sorbent material (C2, C8, C18, SIL, and M1), number of extraction cycles, and sample volume were studied. The optimal conditions of MEPS extraction were obtained using C8 sorbent and small sample volumes (50-250 μL) in one extraction cycle (extract-discard) and in a short time period (about 3 min for the entire sample preparation step). (E)-Resveratrol was eluted by 1×250 μL of the mixture containing 95% methanol and 5% water, and the separation was carried out on a high-strength silica HSS T3 analytical column (100 mm × 2.1 mm, 1.8 μm particle size) using a binary mobile phase composed of aqueous 0.1% formic acid (eluent A) and methanol (eluent B) in the gradient elution mode (10 min of total analysis). The method was fully validated in terms of linearity, detection (LOD) and quantification (LOQ) limits, extraction yield, accuracy, and inter/intra-day precision, using a Madeira wine sample (ET) spiked with (E)-resveratrol at concentration levels ranging from 5 to 60 μg/mL. Validation experiments revealed very good recovery rate of 95±5.8% RSD, good linearity with r(2) values >0.999 within the established concentration range, excellent repeatability (0.52%), and reproducibility (1.67%) values (expressed as RSD), thus demonstrating the robustness and accuracy of the MEPS(C8) /UPLC-photodiode array (PDA) method. The LOD of the method was 0.21 μg/mL, whereas the LOQ was 0.68 μg/mL. The validated methodology was applied to 30 commercial wines (24 red wines and six white wines) from different grape varieties, vintages, and regions. On the basis of the analytical validation, the MEPS(C8)/UPLC-PDA methodology shows to be an improved, sensitive, and ultra-fast approach for determination of (E)-resveratrol in wines with high resolving power within 6 min.     

Poly(D,L-lactide)-block-poly(2-hydroxyethyl acrylate) block copolymers as potential biomaterials for peripheral nerve repair: in vitro and in vivo degradation studies

The properties of poly(D ,L ‐lactide)‐block‐poly(2‐hydroxyethyl acrylate) (PLA‐b‐PHEA) block copolymers by means of in vitro / in vivo (rat) degradation are investigated and compared to those of PLA homopolymer. Over 12 weeks, we observe mass loss and molecular weight decrease. In vitro and in vivo findings are very similar for each polymer tested. When a short PHEA block is used (PLA‐b‐PHEA 15 000–3 000 g · mol^?1, 85/15 wt%), the degradation process is found to be very similar to that of homo‐PLA, and to be typical of a bulk erosion mechanism, with no mass loss observed until week 7 and continuous decrease of molar mass within this timeframe. For a longer PHEA block length within the block copolymer (PLA‐b‐PHEA 15 000–7 500 g · mol^?1, 65/35 wt%), the degradation mechanism is modified, with a significant mass loss observed at early times and only a slight decrease in molar mass. The latter finding is related to the pronounced hydrophilicity and softness of the material induced by the PHEA block, which allow easy diffusion and rapid leakage of the degradation residues from the material towards the aqueous medium. Schwann cells are found to better adhere on spin‐coated films of PLA‐b‐PHEA (85/15 wt%) than on PLA ones. These results show the potential of such hydrophilized PLA‐based copolymers for use in peripheral nerve repair.

     

Application of molecularly imprinted polymer solid-phase extraction for salivary cotinine

A method constituted by molecularly imprinted solid-phase extraction (MISPE) with high-performance liquid chromatography coupled to diode array detector (HPLC-DAD) was developed for cotinine analysis in saliva samples. For this purpose, the separation was carried out with a C18 reversed-phase column at 20 °C. The mobile phase which was composed of a mixture of 09:91 (v/v) acetonitrile/phosphate buffer, pH 6.3, was delivered with isocratic flow rate at 1.4 mL min⁻¹. Employing MISPE, the best conditions were achieved with 1.5 mL of saliva plus 1.5 mL of 0.1 mol L⁻¹ of acetate buffer, pH 5.5, which were then passed through a cartridge previously conditioned with 2 mL acetonitrile, 2 mL methanol, and 2 mL of 0.1 mol L⁻¹ sodium acetate buffer, pH 5.5. The washing was carried out with 1 mL deionized water, 1 mL of 0.1 mol L⁻¹ sodium hydroxide, and 1 mL hexane; finally; the cotinine elution was carried out with 3 mL methanol/water (97.5: 2.5, v/v). Linearity ranged from 30 to 500 ng mL⁻¹ with r > 0.99. Intra-assay, interassay precision, and accuracy ranged from 3.1% to 10.1%, 5.2% to 15.9%, and 99.22% to 111.17%, respectively. The detection and quantification limits were 10 and 30 ng mL⁻¹, respectively. This investigation has provided a reliable method for routine cotinine determination in saliva, and it is an important tool for monitoring cigarette smoke exposure in smokers. The method was applied in five smokers’ samples who consumed around five to 20 cigarettes per day and the values of cotinine in saliva were from 66.7 to 316.16 ng mL⁻¹.     

Nanoparticles for the development of improved (bio)sensing systems

Nanoparticles serve as fundamental building blocks for nanobiotechnology, especially in several applications in the development of novel (bio)sensing systems. Nanoparticles can be used for modification of the surfaces of (bio)sensing transducers or as optical or electroactive labels to improve different aspects of performance, for example sensitivity, detection limit, multidetection capability, and response stability. Nanoparticles can be integrated into the transducer materials on an individual basis or inside other matrices to ensure the immobilization of recognition biomolecules and/or receptors which are the principal components of the (bio)sensing systems. Incorporation of nanoparticles into optical and electrochemical (bio)sensing systems, including their use in microfluidic based systems has the advantages of enabling the design of robust, easy to use, portable, and cost-effective devices.     

On the transfer matrix of a MIMO system

We develop a deterministic ab initio model for the input–output relationship of a multiple‐input multiple‐output (MIMO) wireless channel, starting from the Maxwell equations combined with Ohm's law. The main technical tools are scattering and geometric perturbation theories. The derived relationship can lead us to a deep understanding of how the propagation conditions and the coupling effects between the elements of multiple‐element arrays affect the properties of an MIMO channel, e.g. its capacity and its number of degrees of freedom. Copyright © 2011 John Wiley & Sons, Ltd.     

On confined McKean Langevin processes satisfying the mean no-permeability boundary condition

We construct a confined Langevin type process aimed to satisfy a mean no-permeability condition at the boundary. This Langevin process lies in the class of conditional McKean Lagrangian stochastic models studied by Bossy, Jabir and Talay (2010) [5]. The confined process considered here is a first construction of solutions to the class of Lagrangian stochastic equations with boundary condition issued by the so-called PDF methods for Computational Fluid Dynamics. We prove the well-posedness of the confined system when the state space of the Langevin process is a half-space.     

Two-dimensional curved fronts in a periodic shear flow

This paper is devoted to the study of traveling fronts of reaction-diffusion equations with periodic advection in the whole plane R². We are interested in curved fronts satisfying some “conical” conditions at infinity. We prove that there is a minimal speed c^∗ such that curved fronts with speed c exist if and only if c≥c^∗. Moreover, we show that such curved fronts are decreasing in the direction of propagation, that is, they are increasing in time. We also give some results about the asymptotic behaviors of the speed with respect to the advection, diffusion and reaction coefficients.     

On constructing total orders and solving vector optimization problems with total orders

In this paper, we introduce a construction method of total ordering cone on \mathbbRⁿ{\mathbb{R}^n} . It is shown that any total ordering cone on \mathbbRⁿ{\mathbb{R}^n} is isomorphic to the cone \mathbbRⁿ_lex{\mathbb{R}^n_{lex}} . Existence of a total ordering cone that contain given cone with a compact base is shown. By using this cone, a solving method of vector and set valued optimization problems is presented.