Optimization of a multi-residue screening method for the determination of 85 pesticides in selected food matrices by stir bar sorptive extraction and thermal desorption GC-MS

A multi-residue method to determine 85 pesticides, including organochlorine pesticides, carbamates, organophosphorus pesticides, and pyrethroids, in vegetables, fruit, and green tea, has been developed. The method is based on stir bar sorptive extraction (SBSE) coupled to thermal desorption (TD) and retention time locked (RTL) GC-MS operating in the scan mode. Samples are extracted with methanol and diluted with water prior to SBSE. Dilution of the methanol extract before SBSE was optimized to obtain high sensitivity and to minimize adsorption onto the glass wall of the extraction vessel as well as to minimize sample matrix effects (particularly for the pesticides with high log K(o,w) values). The optimized method consists of a dual SBSE extraction performed simultaneously on respectively a twofold and a fivefold diluted methanol extract. After extraction, the two stir bars are placed in a single glass thermal desorption liner and are simultaneously desorbed. The method showed good linearity (r2 > 0.9900) and high sensitivity (limit of detection: < 5 microg kg(-1)) for most of the target pesticides. The method was applied to the determination of pesticides at low microg kg(-1) in tomato, cucumber, green soybeans, spinach, grapes, and green tea.     

Study of fragmentation pattern and adsorption of 9-O-(triphenylsilyl)-10,11-dihydrocinchonidine on platinum by hydrogen/deuterium exchange using electrospray ionization ion-trap tandem mass spectrometry

We have studied the adsorption on a platinum (Pt) catalyst of two compounds utilizable as a chiral basic catalyst and a chiral modifier, dihydrocinchonidine (DHCD), and a new cinchona alkaloid derivative containing a bulky group, the Ph3SiO-DHCD molecule. The method of choice was the detection by electrospray ionization (ESI) ion-trap tandem mass spectrometry (MS/MS) of hydrogen/deuterium (H/D) exchange at room temperature, in tetrahydrofuran, at a D2 pressure of 1 bar. Based on the ESI-MS/MS spectrum of the new compound, we propose a mechanism for the formation of the silatropylium cation containing a Si-O bond. From the fragmentation pattern of Ph3SiO-DHCD it was confirmed that ESI-ion-trap MS/MS can be used to study the adsorption processes of complicated carbon compounds by investigating their H/D exchange reactions. In the case of Ph3SiO-DHCD, the results demonstrate that H/D exchange takes place mainly on the quinoline skeleton. However, the strong pi-bonded adsorption of the quinoline skeleton parallel with the imaginary plane of Pt is not preferred because the bulky Ph3Si group inhibits the multiple pi-bonded adsorption of the Ph3SiO-DHCD. Because of this hindrance the molecule was adsorbed tilted via the nonbonding electron pair of the N atom and C2' atom of the quinoline skeleton; consequently, mainly alkaloid-d1 and alkaloid-d2 are formed.     

Long-range magnetic ordering in iron jarosites prepared by redox-based hydrothermal methods

The iron jarosites, plumbojarosite, Pb0.5Fe3(OH)6(SO4)2, argentojarosite, AgFe3(OH)6(SO4)2, and thallium jarosite, TlFe3(OH)6(SO4)2, along with the selenate-capped jarosite analogues of potassium, KFe3(OH)6(SeO4)2, and rubidium, RbFe3(OH)6(SeO4)2, have been prepared in their analytically pure forms by employing redox-based hydrothermal methods. The crystal structures of these materials have been determined, and all are found to be essentially isostructrual including Pb0.5Fe3(OH)6(SO4)2, which is distinct from the structure reported for naturally mined samples. All iron jarosites show long-range order (LRO), signified by a sharp transition temperature, T(N), which falls in the narrow temperature range of 61.4 +/- 5 K. The mechanism responsible for this ordering has been established by examining magnetostructural correlations for the jarosites possessing various interlayer cation and capping groups. We show that all magnetic properties of jarosites, including LRO, find their origin in the basic magnetic unit, the intralayer Fe3(mu-OH)3 triangle. Field-dependent magnetization experiments are consistent with the antiferromagnetic stacking of an out of plane moment developed from spin canting within Fe3(mu-OH)3 triangles. Together with the previously reported AFe3(OH)6(SO4)2 (A = Na+, K+, Rb+ and NH4+) jarosites, these compounds provide a framework for probing magnetic ordering in a spin frustrated lattice of the largest series of isoelectronic and isostructural kagomé systems yet discovered.     

Emulsion polymerization of styrene and methyl methacrylate using a hydrophobically modified inulin and comparison with other surfactants

The use of a new class of graft polymer surfactants, based on inulin, in emulsion polymerization of poly(methyl methacrylate) (PMMA) and polystyrene (PS) particles is described. PS and PMMA were synthesized by emulsion polymerization, and stable particles with a high monomer content (50 wt %) were obtained with a very small amount of polymeric surfactant ([surfactant]/[monomer] = 0.0033). The latex dispersions were characterized by dynamic light scattering and by transmission electron microscopy to obtain the average particle size and the polydispersity index, and the stability was determined by turbidimetry measurements and expressed in terms of critical coagulation concentration. The last section gives a comparison of PMMA particles prepared by emulsion polymerization using classical surfactants from different types as emulsifiers with that obtained using the copolymer surfactant. It shows the superiority of INUTEC SP1 as it is the only one that allows stable particles at 20 wt % monomer content, with a smaller ratio [surfactant]/[monomer] = 0.002.     

Polyethene with pendant fullerene moieties

Polyethene with fullerene moieties pendant on short-chain branches was prepared by the catalytic copolymerization of ethene and a fullerene-containing vinylic comonomer, yielding polyethene copolymers containing up to 25 wt% of C60.     

Application of a retention database to the identification of individual polychlorinated biphenyl congeners in Aroclors mixture using selected polychlorinated biphenyls as a reference series

The database of the relative retention times (RRTs) of polychlorinated biphenyls (PCBs) reported in literature was used to calculate the retention indices (RIs) of all 209 PCB congeners on temperature programmed capillary column Rtx-5. Calculation of retention indices was based on reference series of seven congeners (PCB IUPAC Nos. 18, 52, 101, 143, 185, 203 and 206) that exhibit linear relative retention time behaviour as a function of chlorine number. The calculated indices were compared to those determined in our laboratory as well as to those obtained by other authors. The proposed indices system was applied for identification individual congeners in mixture of Aroclors 1242:1254:1260, using only reference series of PCBs.     

A rapid heating and high magnetic field thermal analysis technique

Journal of Thermal Analysis and Calorimetry - A new thermal analysis technique is described that allows measurements to be performed on bulk samples at extreme heating and cooling rates and in high...     

Neutral-ligand complexes of bis(imino)pyridine iron: synthesis, structure, and spectroscopy

A family of bis(imino)pyridine iron neutral-ligand derivatives, ((iPr)PDI)FeL(n) ((iPr)PDI = 2,6-(2,6-iPr2-C6H3N=CMe)2C6H3N), has been synthesized from the corresponding bis(dinitrogen) complex, ((iPr)PDI)Fe(N2)2. When L is a strong-field ligand such as tBuNC or a chelating alkyl diphosphine such as DEPE (DEPE = 1,2-bis(diethylphosphino)ethane), a five-coordinate, diamagnetic compound results with no spectroscopic evidence for mixing of paramagnetic states. Reducing the field strength of the neutral donor to principally sigma-type ligands such as tBuNH2 or THT (THT = tetrahydrothiophene) also yielded diamagnetic compounds. However, the 1H NMR chemical shifts of the in-plane bis(imino)pyridine hydrogens exhibit a large chemical shift dispersion indicative of temperature-independent paramagnetism (TIP) arising from mixing of an S = 1 excited state via spin-orbit coupling. Metrical data from X-ray diffraction establish bis(imino)pyridine chelate reduction for each structural type, while M?ssbauer parameters and NMR spectroscopic data differentiate the spin states of the iron and identify contributions from paramagnetic excited states.     

Solid-supported monolayers and bilayers of amphiphilic beta-cyclodextrins

This paper describes the adsorption and spreading of beta-cyclodextrin (CD) vesicles on hydrophobic and hydrophilic substrates, which involves a transition from bilayer vesicles to planar molecular monolayers or bilayers. On substrates that are patterned with self-assembled monolayers by microcontact printing (muCP), the CD vesicles preferentially adsorb on hydrophobic areas instead of hydrophilic (nonionic) areas, and on cationic areas instead of hydrophilic (nonionic) areas. Supported monolayers of amphiphilic cyclodextrins CD1 and CD2 were obtained by adsorption of CD vesicles to hydrophobic substrates, and supported bilayers of amphiphilic cyclodextrins CD1 and CD2 were prepared by adsorption of CD vesicles on cationic substrates. Contact angle goniometry, atomic force microscopy and confocal fluorescence microscopy (CFM) were used to analyze the supported CD layers. The fluidity of the supported CD layers was verified using fluorescence recovery after photobleaching experiments. The supported layers function as a supramolecular platform that can bind suitable guest molecules through inclusion in the CD host cavities. Additionally, the CD host layers were patterned with fluorescent guest molecules by supramolecular muCP on the supported CD layers. The host-guest interactions were investigated with CFM and fluorescence resonance energy transfer experiments.