Measurement of resistant starch by enzymatic digestion in starch and selected plant materials: collaborative study

Interlaboratory performance statistics was determined for a method developed to measure the resistant starch (RS) content of selected plant food products and a range of commercial starch samples. Food materials examined contained RS (cooked kidney beans, green banana, and corn flakes) and commercial starches, most of which naturally contain, or were processed to yield, elevated RS levels. The method evaluated was optimized to yield RS values in agreement with those reported for in vivo studies. Thirty-seven laboratories tested 8 pairs of blind duplicate starch or plant material samples with RS values between 0.6 (regular maize starch) and 64% (fresh weight basis). For matrixes excluding regular maize starch, repeatability relative standard deviation (RSDr) values ranged from 1.97 to 4.2%, and reproducibility relative standard deviation (RSDR) values ranged from 4.58 to 10.9%. The range of applicability of the test is 2-64% RS. The method is not suitable for products with <1% RS (e.g., regular maize starch; 0.6% RS). For such products, RSDr and RSDR values are unacceptably high.     

High-throughput ribozyme-based assays for detection of viral nucleic acids

Many reports have suggested that target-activated ribozymes hold potential value as detection reagents. We show that a "half"-ribozyme ligase is activated similarly by three unstructured oligoribonucleotides representing the major sequence variants of a hepatitis C virus 5'-untranslated region (5'-UTR) target and by a structured RNA corresponding to the entire 5'-UTR. Half-ribozyme ligation product was detected both in an ELISA-like assay and in an optical immunoassay through the use of hapten-carrying substrate RNAs. Both assay formats afford a limit of detection of approximately 1 x 10(6) HCV molecules (1.6 attomol, 330 fM), a sensitivity which compares favorably to that provided by standard immunoassays. These data suggest that target-activated ribozyme systems are a viable approach for the sensitive detection of viral nucleic acids using high-throughput platforms.     

THE 'OPSIN SHIFT' IN BACTERIORHODOPSIN: STUDIES WITH ARTIFICIAL BACTERIORHODOPSINS

Abstract— The difference (in cm⁻¹) in absorption maxima between the protonated Schiff base of retinals and the pigment derived therefrom has been defined as the opsin shift. It represents the influence of the opsin binding site on the chromophore. The analysis of the opsin shifts of a series of dihydrobacteriorhodopsins has led to the external point-charge model, which in addition to a counter anion near the Schiff base ammonium, carries another negative charge in the vicinity of the β-ionone ring. This is in striking contrast to the external point-charge model proposed earlier for the bovine visual pigment. The absorption maxima of rhodopsins formed from bromo- and phenyl retinals support the two models. A retinal carrying a photoaffinity label has yielded a nonbleachable bacteriorhodopsin.     

Binding sites of nitrogenase: kinetic and theoretical studies of cyanide binding to extracted FeMo-cofactor derivatives

The first kinetic study of a substrate (CN(-)) binding to the isolated active site (extracted FeMo-cofactor) of nitrogenase is described. The kinetics of the reactions between CN(-) and various derivatives of extracted FeMo-cofactor [FeMoco-L; where L is bound to Mo, and is NMF, Bu(t)NC, or imidazole (ImH)] have been followed using a stopped-flow, sequential-mix method in which the course of the reaction is followed indirectly, by monitoring the change in the rate of the reaction of the cofactor with PhS(-). The kinetic results, together with DFT calculations, indicate that the initial site of CN(-) binding to FeMoco-L is controlled by a combination of the electron-richness of the cluster core and lability of the Mo-L bond. Ultimately, the reactions between FeMoco-L and CN(-) involve displacement of L and binding of CN(-) to Mo. These reactions occur with a variety of rates and rate laws dependent on the nature of L. For FeMoco-NMF, the reaction with CN(-) is complete within the dead-time of the apparatus (ca. 4 ms), while with FeMoco-CNBu(t) the reaction is much slower and exhibits first order dependences on the concentrations of both FeMoco-CNBu(t) and CN(-) (k = 2.5 +/- 0.5 x 10(4) dm(3) mol(-1) s(-1)). The reaction of FeMoco-ImH with CN(-) occurs at a rate which exhibits a first order dependence on FeMoco-ImH but is independent of the concentration of CN(-) (k = 50 +/- 10 s(-1)). The results are interpreted in terms of CN(-) binding directly to the Mo site for FeMoco-NMF and FeMoco-ImH, but with FeMoco-CNBu(t) initial binding at an Fe site is followed by movement of CN(-) to Mo. Complementary DFT calculations are consistent with this interpretation, indicating that, in FeMoco-L, the Mo-L bond is stronger for L = ImH than for L = CNBu(t) and the binding of CN(-) to Mo is stronger than to any Fe atom in the cofactor.     

Einige bestrahlungsexperimente mit 2, 1-Benzisothiazolen

Some Irradiation Experiments with 2, 1-Benzisothiazoles 2, 1-Benzisothiazole ( 1 ) on irradiation with a mercury high-pressure lamp in benzene/diethylamine yields, after acetylation, 2-acetylamino-benzaldehyde ( 3 ; Scheme 1). Similarly, irradiation of 3-chloro-2, 1-benzisothiazole ( 2 ) in benzene/diethylamine leads to a mixture of 3-dimethylamino-2, 1-benzisothiazole ( 6a ) and N, N-diethyl-thioanthranilamide ( 7a ; Scheme 2). Benzisothiazole 6a , on irradiation, is not transformed into 7a . On the other hand, when 2 is irradiated in methanol a mixture of 3-methoxy-2, 1-benzisothiazole ( 4a ) and methyl anthranilate ( 5a ; Scheme 2) is obtained. In this case, 4a on irradiation in methanol or ethanol also yields 5a . No exchange of the methoxy group in 4a is observed when the irradiation is performed in ethanolic solution. Thus, 2, 1-benzisothiazoles 1 , 2 and 4a react photochemically by N,S-bond cleavage and hydrogen-atom abstraction from the solvent (Scheme 3). 3-Chloro-2, 1-benzisothiazole ( 2 ) shows a second photoreaction, i.e. nucleophilic exchange of the chloro substituent by methanol or diethyl amine. The latter reaction can also be observed thermally, e.g. in boiling methanol in the presence of methoxide ions.     

Pd-catalyzed asymmetric allylic alkylation. A short route to the cyclopentyl core of viridenomycin

A palladium-catalyzed asymmetric allylic alkylation effects a dynamic kinetic asymmetric transformation of racemic isoprene monoepoxide and a surrogate for Nazarov's reagent in which a quaternary center is created with exellent ee. The resultant adduct allows easy access to a substrate for ring-closing metathesis to form a cyclopentenone and sets the stage for an 11-step synthesis of the cyclopentyl core of the antibiotic antitumor agent viridenomycin. [reaction: see text]     

Lipophilicity in PK design: methyl, ethyl, futile

Lipophilicity, often expressed as distribution coefficients (log D) in octanol/water, is an important physicochemical parameter influencing processes such as oral absorption, brain uptake and various pharmacokinetic (PK) properties. Increasing log D values increases oral absorption, plasma protein binding and volume of distribution. However, more lipophilic compounds also become more vulnerable to P450 metabolism, leading to higher clearance. Molecular size and hydrogen bonding capacity are two other properties often considered as important for membrane permeation and pharmacokinetics. Interrelationships among these physicochemical properties are discussed. Increasing size (molecular weight) often gives higher potency, but inevitably also leads to either higher lipophilicity, and hence poorer dissolution/solubility, or to more hydrogen bonding capacity, which limits oral absorption. Differences in optimal properties between gastrointestinal absorption and uptake into the brain are addressed. Special attention is given to the desired lipophilicity of CNS drugs. In examples using -blockers, Ca channel antagonists and peptidic renin inhibitors we will demonstrate how potency and pharmacokinetic properties need to be balanced.     

Porous nanocomposites of zirconium dioxide and silicate

Highly porous nanocomposites of zirconium dioxide and silicate are synthesised in an aqueous system from an inorganic salt of zirconium; the nanacomposites, with tailorable pore structures, exhibit superior performance as catalyst supports.     

Asymmetric Michael addition of glycine imines via quaternary ammonium ion catalysis

The asymmetric Michael addition of glycine imine esters to simple α,β-unsaturated ketones via PTC is investigated. It is found that by employing 1 mol % of a chiral quaternary ammonium salt, derived from α-methylnaphthylamine in conjunction with Cs₂CO₃, high enantioselectivities can be obtained in conjugate additions involving simple alkylvinylketones.     

Synthesis of stable and cell-type selective analogues of cyclic ADP-ribose, a Ca(2+)-mobilizing second messenger. Structure--activity relationship of the N1-ribose moiety

We previously developed cyclic ADP-carbocyclic ribose (cADPcR, 2) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca(2+)-mobilizing second messenger. A series of the N1-ribose modified cADPcR analogues, designed as novel stable mimics of cADPR, which were the 2"-deoxy analogue 3, the 3"-deoxy analogue 4, the 3"-deoxy-2"-O-(methoxymethyl) analogue 5, the 3"-O-methyl analogue 6, the 2",3"-dideoxy analogue 7, and the 2",3"-dideoxydidehydro analogue 8, were successfully synthesized using the key intramolecular condensation reaction with phenylthiophosphate-type substrates. We investigated the conformations of these analogues and of cADPR and found that steric repulsion between both the adenine and N9-ribose moieties and between the adenine and N1-ribose moieties was a determinant of the conformation. The Ca(2+)-mobilizing effects were evaluated systematically using three different biological systems, i.e., sea urchin eggs, NG108-15 neuronal cells, and Jurkat T-lymphocytes. The relative potency of Ca(2+)-mobilization by these cADPR analogues varies depending on the cell-type used: e.g., 3"-deoxy-cADPcR (4) > cADPcR (2) > cADPR (1) in sea urchin eggs; cADPR (1) > cADPcR (2) approximately 3"-deoxy-cADPcR (4) in T-cells; and cADPcR (2) > cADPR (1) > 3"-deoxy-cADPcR (4) in neuronal cells, respectively. These indicated that the target proteins and/or the mechanism of action of cADPR in sea urchin eggs, T-cells, and neuronal cells are different. Thus, this study represents an entry to cell-type selective cADPR analogues, which can be used as biological tools and/or novel drug leads.