充粘液管材中超声纵向导波的无损检测参数选择

对超声纵向导波在充粘液管材中的传播特性进行了分析。在假设实频率和复波数的基础上,计算了导波的频散曲线,得到并分析了导波在系统中的位移分布曲线和衰减系数分布曲线,以此确定了用各模式检测管材中缺陷的最佳频厚积范围和检测的最佳位置。分析结果表明:频厚积在0.07MHz·mm以下,用L(0,1)模式检测较为理想,检测管内壁缺陷时更灵敏;在0.09~0.16MHz·mm之间用L(0,2)模式检测及在0.18~0.28MHz·mm之间用 L(0,3)模式检测时较为理想。     

用斜探头激发的兰姆波对三层板参数进行反演测试研究

超声无损检测中逆问题(反演)的研究在众多的工业领域有广阔的应用前景。本文利用多模式兰姆波速度测量建立了一种基于误差函数的三层板参数反演算法;结合快速傅里叶变换(FFT)及自回归(AR)模型,还提出了一种用于精确检测多模式超声波相速度的“混合”谱估计方法。实验工作由两个普通的斜探头在三层复合结构的同一面激发与接收多模式兰姆波,通过反演得到此三层结构中的多个参数(厚度及其中某层的纵横波声速),实验测试所得到的反演结果与参数的实际值符合得较好。     

Synthesis of the p-keto acids from benzimidazolium iodides and ethyl malonate

The reaction of benzhnidazole methiodide with ethyl malonate in the existence of base was studied,and a new convenient synthetic method of the β-keto acid was provided.     

第4届国际超声大会(ICU)在新加坡召开

2013年5月2日至5日,第4届国际超声大会（ICU）在新加坡召开。本次会议在国际声学委员会的组织下,由新加坡声学学会主办,由澳大利亚声学学会、印度声学学会、香港声学学会和印度无损检测学会联合承办。会议致力于促进超声不同领域,包括基础研究、工程技术以及生物医学应用等方面的国际交流与合作。     

《硅光电池特性》实验教学探索和实践

为了更好地培养全校本科生的创新思维和动手实践能力,探索了适合九零后学生的教学方法。针对实验中存在的一些问题,引导学生积极思考,找到一些快速完成实验并且大大降低仪器损耗率的实验技巧,实现学生、教师、学校三方共赢的目标。     

空间频率域超声背散射参量用于骨质状况的评价*

在超声背散射骨质评价中,不同测量感兴趣区域(ROI)的超声背散射信号会有波动,致使诊断准确度降低。该文目的是研究超声背散射信号随测量区域的变化规律。采用空间扫描方法离体测量了35块骨样本,将超声背散射参数从空间域变换到空间频率域。结果表明,超声背散射参数的主要空间频率成分集中于低频部分;空间频率域超声背散射参量最大值(MASF)与骨矿密度等参数具有中高度显著相关性(R2=0.45~0.83,p0.001);空间频率域超声背散射参量衰减系数(AC)也与松质骨密度及结构特征有显著相关性(R2=0.41~0.72,p0.001)。研究表明空间频率域变换方法有助于明确超声背散射信号随测量ROI的变化规律,空间频率域的超声背散射相关新参量评价松质骨状况具有可行性。     

Reflection and transmission characteristics of ultrasonic guided waves in fractured long bone

Assessment of fractured long bone using ultrasonic guided wave（GW） has gained considerable attention.This paper focuses on using the hybrid boundary element method （HBEM） to analyze the propagation characteristics of ultrasonic GW in fractured long bones. The reflection coefficients（RC） and transmission coefficients（TC） for different depth-to-width ratio（d/w） cracks were numerically calculated and analyzed.It has been shown that the primary output modes,which include the transmission and reflection modes,are the same as the incidence modes.For some cracks,different TC curves always got the local maxima in adjacent frequencies.For different d/w cracks,most of the TC curves had local maxima which are not overlapped.These simulation results are helpful to optimize the modes and frequencies of the incidence GWs for quantitatively evaluating the bone quality and providing the numeral results of the cracks in long cortical bones.     

超声轴向传播技术评价长骨的研究

用超声轴向传播技术评价长骨状况已成为近年来的一个研究热点。本文首先介绍了第一到达波(FAS)法、超声Lamb波及柱面导波法在评价长骨皮质骨状况方面的研究进展,最后分析和讨论了当前研究中存在的问题及应该研究的方向。     

松质骨超声背散射信号的谱信息熵判断方法

在松质骨超声背散射评价的实际应用中,如何快速准确地判断接收到的信号中是否包含有效背散射信号是一个重要问题。提出一种基于谱信息熵的背散射信号判断方法。对在体采集的984例成人跟骨处临床数据,采用该方法判断背散射信号的有效性,将判断结果与经验判断结果进行对照分析,并分析该方法中的信号区间长度和谱信息熵分段数对判断结果的影响。结果表明,当信号区间长度为13μs,谱信息熵分段数为15~20时,该方法可以获得最佳的判断结果(准确度〉95%,灵敏度〉99%,特异度〉87%),并且计算时间极短(1.5 ms)。因此采用谱信息熵方法判断背散射信号的有效性,可以满足超声骨质评价中对准确性和实时性的要求。     

Joint spectrogram segmentation and ridge-extraction method for separating multimodal guided waves in long bones

Ultrasonic guided waves (GWs) can be used to evaluate long bones effectively because of the ability to provide the information of the whole bone. In this study, a joint spectrogram segmentation and ridge-extraction (JSSRE) method was proposed to separate multiple modes in long bones. First, the Gabor time-frequency transform was applied to obtain the spectrogram of multimodal signals. Then, a multi-class image segmentation algorithm was used to find the corresponding region of each mode in the spectrogram, including an improved watershed transform and a region growing procedure. Finally, the ridges were extracted and the time domain signals representing individual modes were reconstructed from these ridges in each region. The validations of this method were discussed by simulated multimodal signals with different signal-to-noise ratios (SNR). The correlation coefficients between the original signals without noise and the reconstructed signals were calculated to analyze the results quantitatively. The results showed that the extracted ridges were in good agreement with generated theoretical dispersion curves, and the reconstructed signals were highly related to the original signals, even under the SNR=3 dB situation.