Radical Hydrodeiodination of Aryl,Alkenyl, Alkynyl,and Alkyl Iodides with an Alcoholate as Organic Chain Reductant through Electron Catalysis

A simple and efficient method for radical hydrodeiodination is reported. The novel approach uses electron catalysis. In situ generated Na‐alcoholates are introduced as radical chain reducing reagents and reactions work with O₂ as cheap initiator. Hydrodeiodination works on aryl, alkenyl, alkynyl iodides and a tert‐alkyl iodide also gets reduced applying the method. Albeit less general, the method is also applicable to the reduction of aryl bromides. The novel reagent is successfully used to conduct typical reductive radical cyclization reactions and mechanistic studies are reported.     

Dry Reforming of Methane on a Highly‐Active Ni‐CeO2 Catalyst: Effects of Metal‐Support Interactions on C−H Bond Breaking

Ni‐CeO₂ is a highly efficient, stable and non‐expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO₂ at temperatures as low as 300 K, generating CH_x and CO_x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density‐functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO_2?x(111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH_x or C species are detected in the C 1s XPS region. The reforming of methane proceeds in a clean and efficient way.     

Isolating Reactions at the Picoliter Scale: Parallel Control of Reaction Kinetics at the Liquid–Liquid Interface

Miniaturized liquid–liquid interfacial reactors offer enhanced surface area and rapid confinement of compounds of opposite solubility, yet they are unable to provide in situ reaction monitoring at a molecular level at the interface. A picoreactor operative at the liquid–liquid interface is described, comprising plasmonic colloidosomes containing Ag octahedra strategically assembled at the water‐in‐decane emulsion interface. The plasmonic colloidosomes isolate ultrasmall amounts of solutions (<200 pL), allowing parallel monitoring of multiple reactions simultaneously. Using the surface‐enhanced Raman spectroscopy (SERS) technique, in situ monitoring of the interfacial protonation of dimethyl yellow (p‐dimethylaminoazobenzene (DY)) is performed, revealing an apparent rate constant of 0.09 min^?1 for the first‐order reaction. The presence of isomeric products with similar physical properties is resolved, which would otherwise be indiscernible by other analytical methods.     

A Supramolecularly Activated Radical Cation for Accelerated Catalytic Oxidation

Tuning the activity of radicals is crucial for radical reactions and radical‐based materials. Herein, we report a supramolecular strategy to accelerate the Fenton reaction through the construction of supramolecularly activated radical cations. As a proof of the concept, cucurbit[7]uril (CB[7]) was introduced, through host–guest interactions, onto each side of a derivative of 1,4‐diketopyrrolo[3,4‐c]pyrrole (DPP), a model dye for Fenton oxidation. The DPP radical cation, the key intermediate in the oxidation process, was activated by the electrostatically negative carbonyl groups of CB[7]. The activation induced a drastic decrease in the apparent activation energy and greatly increased the reaction rate. This facile supramolecular strategy is a promising method for promoting radical reactions. It may also open up a new route for the catalytic oxidation of organic pollutants for water purification and widen the realm of supramolecular catalysis.     

α‐Amino Acid‐Isosteric α‐Amino Tetrazoles

The synthesis of all 20 common natural proteinogenic and 4 otherα‐amino acid‐isosteric α‐amino tetrazoles has been accomplished, whereby the carboxyl group is replaced by the isosteric 5‐tetrazolyl group. The short process involves the use of the key Ugi tetrazole reaction followed by deprotection chemistries. The tetrazole group is bioisosteric to the carboxylic acid and is widely used in medicinal chemistry and drug design. Surprisingly, several of the common α‐amino acid‐isosteric α‐amino tetrazoles are unknown up to now. Therefore a rapid synthetic access to this compound class and non‐natural derivatives is of high interest to advance the field.     

Polarization behavior of polystyrene particles under direct current and low‐frequency (<1 kHz) electric fields in dielectrophoretic systems

The relative polarization behavior of micron and submicron polystyrene particles was investigated under direct current and very low frequency (<1 kHz) alternating current electric fields. Relative polarization of particles with respect to the suspending medium is expressed in terms of the Clausius–Mossotti factor, a parameter of crucial importance in dielectrophoretic‐based operations. Particle relative polarization was studied by employing insulator‐based dielectrophoretic (iDEP) devices. The effects of particle size, medium conductivity, and frequency (10–1000 Hz) of the applied electric potential on particle response were assessed through experiments and mathematical modeling with COMSOL Multiphysics^®. Particles of different sizes (100–1000 nm diameters) were introduced into iDEP devices fabricated from polydimethylsiloxane (PDMS) and their dielectrophoretic responses under direct and alternating current electric fields were recorded and analyzed in the form of images and videos. The results illustrated that particle polarizability and dielectrophoretic response depend greatly on particle size and the frequency of the electric field. Small particles tend to exhibit positive DEP at higher frequencies (200–1000 Hz), while large particles exhibit negative DEP at lower frequencies (20–200 Hz). These differences in relative polarization can be used for the design of iDEP‐based separations and analysis of particle mixtures.     

Recent advances in capillary electrophoretic migration techniques for pharmaceutical analysis (2013–2015)

This review updates and follows‐up a previous review by highlighting recent advancements regarding capillary electromigration methodologies and applications in pharmaceutical analysis. General approaches such as quality by design as well as sample injection methods and detection sensitivity are discussed. The separation and analysis of drug‐related substances, chiral CE, and chiral CE‐MS in addition to the determination of physicochemical constants are addressed. The advantages of applying affinity capillary electrophoresis in studying receptor–ligand interactions are highlighted. Finally, current aspects related to the analysis of biopharmaceuticals are reviewed. The present review covers the literature between January 2013 and December 2015.     

Anti‐Inflammatory Activity of a Novel Acetylene Isolated from the Roots of Angelica tenuissima Nakai

Three polyacetylenes, one novel and two known, were isolated from the root of Angelica tenuissima. Using ¹H‐ and ¹³C‐NMR, COSY, HMBC, and HMQC, their structures were found to be (3R,8S)‐heptadeca‐1‐en‐4,6‐diyne‐3,8‐diol ( 1 ), falcarindiol ( 2 ), and oplopandiol ( 3 ). Absolute configurations of compound 1 were established using Mosher's esterification. In addition, the polyacetylenes ( 1 – 3 ) were evaluated for their anti‐inflammatory activity. Compounds 1 and 3 showed potent inhibitory activity against lipopolysaccharide‐induced nitric oxide (NO) production in RAW267.7 macrophage cells with IC₅₀ values of 4.31 and 5.06 μm, respectively. Compound 1 strongly inhibited inducible nitric oxide synthase (iNOS) and cyclooxygenase (COX)‐2 in a concentration‐dependent manner.     

Synthesis and Characterization of Copper(II)–Phosphonate Coordination Chain Array of Metallocages

Reaction of CuCl₂ ·2H₂O and 2,4,6‐tris(phosphorylmethyl)mesitylene (H₆tpmm) in H₂O?DMF solution at room temperature afforded green crystals of [Cu₆(H₂tpmm)₃(H₂O)₉]·3H₂O ( 1 ), which were characterized by Fourier transform infrared (FT‐IR), thermogravimetric (TG) analysis, and powder X‐ray diffraction (PXRD). The solid‐state structure of 1 reveals a one‐dimensional chain array of M₄L₂ ‐metallocages constituted by the connection of two kinds of metallocage units, namely MC‐A (phosphonate/water‐bridged) and MC‐B (phosphonate‐bridged only), via μ₂‐O(phosphonate)? Cu bonds in ABAABA order. The tris‐phosphonate ligand H₆tpmm is partially deprotonated to form H₂tpmm^4?, which displays a cis,cis,cis conformation to bridge six Cu(II) centers via two monodentate phosphonate groups in a η ⁰:η ⁰:η ¹‐bonding mode and one tridentate phosphonate group in a μ₄, η ¹:η ¹:η ²‐bondingng mode.     

Analysis of dissolution profiles of iron,zinc, and manganese from complex dietary supplements by ion chromatography and chemometrics

Four commercially available formulations containing iron, zinc, and manganese were subjected to dissolution profile testing during 60 min and the dissolution was analyzed by ion chromatography. The obtained curves were analyzed directly by principal component analysis (PCA). The main trend (87.1% of variance) was connected with average dissolution percentage over the investigated time. The second component (11.2% of variance) is connected with shape of dissolution profile. All metals behave in the similar way and the differences were connected with excipients. An additional fit was completed on 12 kinetic models: first order kinetics (4 variants), Higuchi (2 variants), Hixson-Crowell (2 variants), Korsemeyer-Peppas, Logistic (2 variants), Peppas-Sahlin, Quadratic (2 variants), Weibull (3 variants), and Zero order kinetics (2 variants). The ranking of the fitting was performed by Akaike information criteria (AIC) values with additional PCA analysis on them, an approach presented in literature for the first time. The main trend (67.4% of variance) was connected with average fit. The second (14.8% of variance) is connected with differences of fitting ability to investigated dissolution curves. This methodology brought an overall look to trends and variances inside obtained data, both the profile shape and fitting ability to particular models.