Intermolecular Interactions in Crystalline Hydroxychloroquine Sulfate in Comparison with Those in Selected Antimalarial Drugs

Abstract The crystal structure of hydroxychloroquine sulfate (OHClQ) was determined in order to compare its conformation and intermolecular interactions to those in the crystalline chloroquine phosphate (ClQP) and quinine salicylate (QSal) monohydrate. The crystals of OHClQ are monoclinic with the space group P2₁/c and unit-cell dimensions: a = 10.4966(1) ?, b = 8.8056(1) ?, c = 21.8603(3) ?, β = 101.074(1)°. The quinoline antimalarial drugs may interact with their putative receptors by formation of characteristic hydrogen-bonded rings. The protonated nitrogen atoms and/or hydroxyl groups of the drug cation are proton donors, while the oxygen atoms of anions are proton acceptors. Water molecules may intermediate in these interactions. Graphical Abstract Hydroxychloroquine sulfate is a drug used in the treatment of malaria and rheumatic diseases. The X-ray structure analysis shows an important role of intermolecular hydrogen bonds in the crystal architecture. Comparison with chloroquine phosphate and quinine salicylate indicates that the organization of the drug cations is determined by the anions.      

Predicting Mole‐Fraction‐Dependent Dissociation for Weak Acids

We demonstrate for formic and acetic acid dissolved in water as examples that the binary quantum cluster equilibrium (bQCE) approach can predict acid strengths over the whole range of acid concentrations. The acid strength increases in a complex rather than a simple way with increasing mole fraction of the acid from 0 to 0.7, reflecting the complex interplay between the dissociated ions or conjugate bases available as compared to the acid and water molecules. Furthermore, our calculated ion concentrations meet the experimental maximum of the conductivity with excellent agreement for acetic acid and satisfactorily for the formic acid/water mixture. As only a limited number of simple quantum‐chemical calculations are required for the prediction, bQCE is clearly a valuable approach to access these quantities also in non‐aqueous solutions. It is a highly valuable asset for predicting ionization processes in highly concentrated solutions, which are relevant for biological and chemical systems, as well as technological processes.     

Use of a recently developed thermal modulator within the context of comprehensive two‐dimensional gas chromatography combined with time‐of‐flight mass spectrometry: Gas flow optimization aspects

The present research is based on the use of a recently developed comprehensive two‐dimensional gas chromatography thermal modulator, which is defined as solid‐state modulator. The transfer device was installed on top of a single gas chromatography oven, while benchtop low‐resolution time‐of‐flight mass spectrometry was used to monitor the compounds exiting the second analytical column. The solid‐state modulator was first described by Luong et al. in 2016, and it is a moving modulator that does not require heating and cooling gases to generate comprehensive two‐dimensional gas chromatography data. The accumulation and remobilization steps occur on a trapping capillary, this being subjected to thermoelectric cooling and micathermic heating. In this study, the effects of the gas linear velocity on the modulation performance were evaluated by using two different uncoated trapping capillaries, viz., 0.8 m × 0.25 mm id and 0.8 m × 0.20 mm id. Solid‐state modulator applications were carried out on a standard solution containing n‐alkanes (C_9, C_10, C₁₂), and on a sample of diesel fuel. The results indicated that the type of trapping capillary and gas velocity have a profound effect on modulation efficiency.     

The experimental design approach to the optimization of a simple quick easy cheap effective rugged and safe method for the analysis of phytoestrogens in complex soy‐based food

The present paper deals with the multivariate optimization of an extraction‐purification strategy for the determination of phytoestrogens (daidzein, genistein, coumestrol, formononetin, and biochanin A) in soy‐based meat substitutes by high performance liquid chromatography with tandem mass spectrometry. For a reliable quantitation of these new concerning compounds in such a complex matrix, recovery and matrix effect must be carefully evaluated. Therefore, two sequential experimental designs were used to optimize the sample‐pretreatment of soy‐based burgers: the chosen technique was the quick, easy, cheap, effective, rugged and safe methodology, which does not require any particular facility or instrumentation. Thanks to the first screening design (Plackett‐Burman), the significant factors influencing the studied responses were identified and further investigated through a response surface design (Box‐Behnken). The optimal values of the variables (volume of extraction solvent mix/sample mass ratio and two clean‐up sorbents) led to quantitative recoveries (97–104%) and low ion suppression (matrix effect 60–93%) for all analytes. This optimized method was characterized by low detection limits (0.2–1.5 ng/g) and excellent intraday precision (RSD 2–4%). It was applied to the determination of the considered compounds in several soy‐burgers from the Italian market, detecting low ng/g levels (up to 40 ng/g) of coumestrol, formononetin, and biochanin A, and high concentrations (7.9–78 µg/g) of genistein and daidzein.     

Spatial release from energetic and informational masking in a divided speech identification task

When listening selectively to one talker in a two-talker environment, performance generally improves with spatial separation of the sources. The current study explores the role of spatial separation in divided listening, when listeners reported both of two simultaneous messages processed to have little spectral overlap (limiting "energetic masking" between the messages). One message was presented at a fixed level, while the other message level varied from equal to 40 dB less than that of the fixed-level message. Results demonstrate that spatial separation of the competing messages improved divided-listening performance. Most errors occurred because listeners failed to report the content of the less-intense talker. Moreover, performance generally improved as the broadband energy ratio of the variable-level to the fixed-level talker increased. The error patterns suggest that spatial separation improves the intelligibility of the less-intense talker by improving the ability to (1) hear portions of the signal that would otherwise be masked, (2) segregate the two talkers properly into separate perceptual streams, and (3) selectively focus attention on the less-intense talker. Spatial configuration did not noticeably affect the ability to report the more-intense talker, suggesting that it was processed differently than the less-intense talker, which was actively attended.     

The Na-adsorbed Ge(0 0 1) surface: Structure and STM image simulations

Sodium adsorbed on the Ge(0 0 1) surface causes reconstruction of the surface with the type of reconstruction depending on the amount of the adsorbate. We present theoretical investigations of the structure and electronic properties of Na-adsorbed Ge(0 0 1) for the coverage of 0.5 monolayer using the combination of two methods: a plane-wave basis method and a local-orbital minimal-basis method. Two possible minimum-total-energy atomic configurations have been found, namely, the Na/Ge(0 0 1)-p(2 ×1) and Na/Ge(0 0 1)-p(4 × 1) reconstructions. The surface electronic structure for all calculated configurations occurs to be metallic. Our investigations are completed by a simulation of STM images for the obtained atomic structures.     

Isolation,identification and synthesis of the sex pheromone of the citrus mealybug,Planococcus citri (risso)

The sex attractant pheromone of the citrus mealybug, $\text{Planococcus citri}$ (Risso), has been Identified as (1$\text{R}$-$\text{cis}$)-(+)-2,2-dimethyl-3-(1-methylethenyl)cyclobutanemethanol acetate (VI).     

Studies of Mental “Noise”

Successive tests of subjects' performance in reaction time tasks were treated as time series and submitted to spectrum analysis. Rather than revealing the white noise expected by the view that variability is due to random error (equivalent power across frequency), the power spectra revealed colored noise. The slopes of the power spectra did not vary much for tasks differing in memory requirements. Spectrum analysis of time series from the logistic map also showed colored noise in regions on the edge of chaos, showing that the presence of colored noise in cognitive data need not oblige a theoretical account based on a complex, high-dimensional, system.     

Scaling and mesostructure of Carbopol dispersions

Rheological measurements were performed on aqueous dispersions of two commercial crosslinked polymer microgels, Carbopol Ultrez 10 and Carbopol ETD 2050, prepared over a wide range of concentration and pH. For all concentrations studied, both the yield stress and the elastic modulus initially increased dramatically with pH and displayed broad peaks at intermediate pH. This is consistent with the onset of jamming of the Carbopol particles due to a rapid increase in particle size caused by osmotic swelling in the presence of NaOH. Scaling of both yield stress and elasticity with concentration was observed only at higher concentrations, which we believe indicates a change from a percolated structure at low volume fractions to a space filling network of compressed particles at high volume fractions. This model is supported by confocal microscopy of fluorescently dyed Carbopol dispersions.     

Assessment of a high‐order MUSCL method for rotor flows

This work presents the implementation of a high‐order, finite‐volume scheme suitable for rotor flows. The formulation is based on the variable extrapolation MUSCL‐scheme, where high‐order spatial accuracy (up to fourth‐order) is achieved using correction terms obtained through successive differentiation. A variety of results are presented, including 2‐ and 3‐dimensional test cases. Results with the proposed scheme, showed better wake and higher resolution of vortical structures compared with the standard MUSCL, even when coarse meshes were employed. The method was also demonstrated for 3‐dimensional unsteady flows using overset and moving grids for the UH‐60A rotor in forward flight and the Enhanced Rotorcraft Innovative Concept Achievement tiltrotor in aeroplane mode. For medium grids, the present method adds reasonable CPU and memory overheads and offers good accuracy on relatively coarse grids.