Simultaneous determination of mercury and arsenic by anodic stripping voltammetry

An electrochemical method for the simultaneous determinations of Hg^II concentration and total As^III and As^V concentration has been developed. The method does not require the additional preliminary step of the chemical reduction of As^V to As^III, or oxidation of As^III to As^V before stripping analysis takes place. Also, the method for the simultaneous determination of Hg^II concentration and As^III concentration is described. Measurements were performed in 0.1 M HCl using a gold-plated graphite electrode as sensor. Detection limits for both methods are below 0.4 ppb. Relative standard deviation did not exceed 15%. The possible interference by other trace metals was investigated. Analyses of natural water and industrial solutions were made using proposed methods and AAS. The t-test demonstrates that there was no significant difference between the results obtained with these methods. Proposed methods decrease the time of analysis because concentrations of the Hg^II and arsenic ions were measured simultaneously. Also, the removal of the additional step of chemical reduction of As^V to As^III or oxidation of As^III to As^V decreases analysis time, and also reduces the chance of contamination due to the use of additional reagents.     

The effect of the amphiprotic nature of human hair keratin on the adsorption of high charge density cationic polyelectrolytes

Adsorption of the cationic polymers poly(methacrylamidopropyltrimethyl ammonium chloride) (PMAPTAC) and poly(1,1-dimethylpiperidinium-3,5-diallylmethylene chloride) (PDMPDAMC) on human hair was studied by measurements of the amount of polymer adsorbed and by the streaming potential method. Results reflect the amphoteric nature of the keratin surface and show that the excess of anionic sites at pH values above 4 is the main driving force for the adsorption of cationic polyelectrolytes. Lowering the pH below 4 or addition of neutral salt (KCl) reduces the amount of adsorbed polymer. It was shown that the adsorption of cationic polymer in the concentration range 0.01 to 0.1 % and at neutral pH reverses the overall character of the surface from anionic to cationic. Keratin fibers modified in this manner do not exhibit amphoteric character and bear excess positive charge in the pH range 2–9.5. The value of the amount of the polymer adsorbed at saturation concentration (2 mg/g) as well as the lack of molecular weight effect in the range (5 · 10⁴ – 10⁶) on the amount of polymer adsorbed suggest that polymer chains adopt a rather extended conformation on the fiber surface. Some data concerning the formation of a complex between adsorbed cationic polymer and anionic detergents or polyelectrolytes are also presented.     

Sequential determination of platinum, ruthenium, and molybdenum in carbon-supported Pt, PtRu, and PtMo catalysts by atomic absorption spectrometry

A simple accurate and precise analytical method for the determination of platinum, ruthenium, and molybdenum in Pt, PtRu, and PtMo nanoparticles catalysts deposited on high-surface area carbon by flame atomic absorption spectrometry (FAAS) and graphite furnace atomic absorption spectrometry (GFAAS) is described. The complete digestion of samples (0.010-0.020 g), which contain noble metals (NMs) in the range between 0 and 30% in combination among them or with other non-NMs, is obtained under mild conditions using both concentrated HCl and HCl+HNO₃ (1+1 (v/v)) mixture to boiling for 30 min in an open vessel. Carbon is separated from the solution by filtering it. Under optimized conditions of the flame, the poor sensitivity of platinum is enhanced 50-fold in presence of 1% (m V⁻¹) ascorbic acid, whereas the analytical signal of ruthenium increased by the presence of co-existing platinum. Any kind of interference is observed on the analytical signal of molybdenum. Recovery test obtained by analyzing commercial powder catalysts ranged from 99 to 101%. The precision, expressed as relative standard deviation of five measurements, is better than 1%. Electrode catalysts, made by using the carbon-supported platinum-based powder catalysts, have been analyzed for the metal loadings onto the electrode by GFAAS after dissolution under the same conditions used for the powder catalysts. The precision, expressed as relative standard deviation of three measurements, is better than 2%.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

GIAO/DFT evaluation of 13C NMR chemical shifts of selected acetals based on DFT optimized geometries

DFT/B3LYP calculations of the ground-state conformation of eight cyclic and acyclic acetals are presented and compared with experimental data. Results of single-point GIAO/DFT calculations at five different levels of theory show that isotropic shieldings need to be empirically scaled to achieve agreement with experimental chemical shifts. Statistical evaluation of data indicates that the most accurate prediction of 13C chemical shifts is achieved at the MPW1PW91/6-311G** level of theory. An empirical equation describing the relationship between delta values and shielding constants is postulated. This equation has been applied to the non-chair ground-state conformation of the six-membered acetonide and to the conformationally flexible benzodioxonine derivative. The agreement observed between the experimental and predicted chemical shifts shows that calculations at the MPW1PW91/6-311G** level of theory are adequate for addressing questions of conformation.     

The surface of ordered mesoporous benzene-silica hybrid material: an infrared and ab initio molecular modeling study

Joint IR and computational results allow a detailed characterization of the surface properties of a mesoporous benzene-silica hybrid material with crystal-like wall structure. After outgassing at 450 degrees C, hydroxyl species mainly consist of noninteracting silanols, with both O-H and Si-O stretching modes at lower frequencies than those of SiOH in silica. Interaction with several probe molecules, followed both by experiment and calculus, shows that the aryl group in the coordination sphere of Si imparts a lesser acidity with respect to the isolated silanol in silica. In contrast, adsorption isotherms indicate that the interaction with acetone is stronger with benzene-silica than with silica: this is interpreted in terms of secondary interactions taking place between the slightly acidic CH in acetone and the electronic cloud in benzene-like rings. This suggests that both the inorganic component and the organic one play a role in dictating the surface behavior.     

One-step electrochemical synthesis of pure poly(2,5-dicyano-p-phenylenevinylene) films

In this communication we describe the electrochemical synthesis of poly(2,5-dicyano-p-phenylenevinylene) (DCNPPV) polymer films on indium tin oxide substrates. We investigate the purity, morphology, absorption and emission properties of the film. The purity was checked by infrared spectroscopy. The film formed presented spectroscopic purity equivalent to the chemically prepared PPV that was dialyzed for one week. Scanning electron microscopy of the surface revealed a grain-like morphology. The absorption and emission spectra showed absorption and emission bands at 420 nm and 575 nm, respectively, with the absorption onset at 422 nm, which corresponds to an energy gap of 2.25 eV. The electrochemical determination of the energy gap gives 2.05 eV, thus quite close to the optical energy gap at the onset of absorption. The EA and IP were determined by electrochemical measurements and are 3.46 eV and 5.51 eV, respectively.

The mass spectra of [17-13C]phyllocladene and [3-13C]methylenecholestane—III

The mass spectra of [17-¹³C]phyllocladene and [3-¹³C]methylenecholestane have been examined. It is shown that there are some rearrangements at 70 e V as in the case of [17-¹³C]kaurene. However, no extensive randomization is evident at the molecular ion level. The results are interesting because very little is known about ¹³C randomization in polycyclic aliphatic hydrocarbons. The percentage retention of label was calculated for each ion.     

Molecular vibrations in a gradient extremal path

Summary The calculation of vibrational states using a gradient extremal path is discussed. Gradient extremal paths are defined by local criteria, which lead to stable solutions. This has certain advantages in comparison with a steepest-descent path, which is often difficult to determine accurately. For cases where a reaction path formalism is applicable, a path based on the gradient extremal concept gives results in close agreement with those obtained using traditional steepest-descent methods. We present algorithms for carrying out such calculations and also give some numerical results.     

Electrokinetic molecular separation in nanoscale fluidic channels

This report presents a study of electrokinetic transport in a series of integrated macro- to nano-fluidic chips that allow for controlled injection of molecular mixtures into high-density arrays of nanochannels. The high-aspect-ratio nanochannels were fabricated on a Si wafer using interferometric lithography and standard semiconductor industry processes, and are capped with a transparent Pyrex cover slip to allow for experimental observations. Confocal laser scanning microscopy was used to examine the electrokinetic transport of a negatively charged dye (Alexa 488) and a neutral dye (rhodamine B) within nanochannels that varied in width from 35 to 200 nm with electric field strengths equal to or below 2000 V m-1. In the negatively charged channels, nanoconfinement and interactions between the respective solutes and channel walls give rise to higher electroosmotic velocities for the negatively charged dye than for the neutral dye, towards the negative electrode, resulting in an anomalous separation that occurs over a relatively short distance (<1 mm). Increasing the channel widths leads to a switch in the electroosmotic transport behavior observed in microscale channels, where neutral molecules move faster because the negatively charged molecules are slowed by the electrophoretic drag. Thus a clear distinction between "nano-" and "microfluidic" regimes is established. We present an analytical model that accounts for the electrokinetic transport and adsorption (of the neutral dye) at the channel walls, and is in good agreement with the experimental data. The observed effects have potential for use in new nano-separation technologies.