Effects of serum proteins on corrosion behavior of ISO 5832–9 alloy modified by titania coatings

Stainless steel ISO 5832–9 type is often used to perform implants which operate in protein-containing physiological environments. The interaction between proteins and surface of the implant may affect its corrosive properties. The aim of this work was to study the effect of selected serum proteins (albumin and γ-globulins) on the corrosion of ISO 5832–9 alloy (trade name M30NW) which surface was modified by titania coatings. These coatings were obtained by sol–gel method and heated at temperatures of 400 and 800 °C. To evaluate the effect of the proteins, the corrosion tests were performed with and without the addition of proteins with concentration of 1 g L^?1 to the physiological saline solution (0.9 % NaCl, pH 7.4) at 37 °C. The tests were carried out within 7 days. The following electrochemical methods were used: open circuit potential, linear polarization resistance, and electrochemical impedance spectroscopy. In addition, surface analysis by optical microscopy and X-ray photoelectron spectroscopy (XPS) method was done at the end of weekly corrosion tests. The results of corrosion tests showed that M30NW alloy both uncoated and modified with titania coatings exhibits a very good corrosion resistance during weekly exposition to corrosion medium. The best corrosion resistance in 0.9 % NaCl solution is shown by alloy samples modified by titania coating annealed at 400 °C. The serum proteins have no significant effect onto corrosion of investigated biomedical steel. The XPS results confirmed the presence of proteins on the alloy surface after 7 days of immersion in protein-containing solutions.     

Memory effect of mobile phase additives in chiral separations on a Chiralpak AD column

Using chiral probes shown to be sensitive to the presence of mobile phase additives, a memory effect for these additives by an amylosic column was demonstrated. Exposure to these additives gave prolonged chromatographic performance changes even after their removal from the mobile phase. This finding is consistent with strong binding of the additives to the stationary phase. A procedure to remove bound additives was developed.     

Radiation polymerization and crosslinking: A viable alternative for synthesis of porous functional polymers

We have earlier shown the possibility of preparation of crosslinked porous polymers by ionizing radiation-initiated reactions, and here we give an overview of the irradiation conditions—porous properties relationship for several methacrylate type copolymers. We illustrate the possible applications by an environment-friendly chromatographic column using water as eluent and a chemically stable scintillating polymer with excellent ion-binding capacity for possible continuous monitoring of radioactivity in natural waters.     

Close-loop three-laser scheme for chaos-encrypted message transmission

In this paper, we numerically evaluate private data transmission using a three-laser scheme, consisting of a pair of twin semiconductor lasers, driven to chaos by delayed optical feedback in a short cavity, and optically injected by a third chaotic laser which forces them to synchronize. This laser is selected with different internal parameters with respect to the twin pair, so that the emissions of the synchronized, matched lasers, are highly correlated, whereas their correlation with the driver is low. The digital message modulates the emission of the transmitter, as in a standard Chaos Modulation scheme. Message recovery is then obtained by subtracting, from the transmitted chaos-masked message, the chaos, locally generated by the synchronized receiver laser. Simulations have been performed with the Lang-Kobayashi model, and, in view of application to private transmission, we have investigated the effect of the parameter mismatch, between transmitter and receiver, on message recovery. A preliminary experimental evaluation has been also performed using specially designed InP integrated modules.     

Comparison of Eu(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> and Eu(acac)<Subscript>3</Subscript> precursors for doping luminescent silica nanoparticles

In this study, we report the comparison between Eu³⁺-doped silica nanoparticles synthesized by Stöber method using Eu(NO₃)₃ or Eu(acac)₃ as precursors. The impact of different europium species on the properties of the final silica nanospheres is investigated in details in terms of size, morphology, reachable doping amount, and luminescence efficiency. Moreover, the results obtained for different thermal treatments are presented and discussed. It is shown that the organic complex modify the silica growing process, leading to bigger and irregular nanoparticles (500–800 nm) with respect to the perfectly spherical ones (400 nm) obtained by the nitrate salt, but their luminescence intensity and lifetime is significantly higher when 800–900 °C annealing is performed.     

Structural and luminescence properties of europium(III)-doped zirconium carbonates and silica-supported Eu3+-doped zirconium carbonate nanoparticles

The synthesis, morphology and luminescence properties of europium(III)-doped zirconium carbonates prepared as bulk materials and as silica-supported nanoparticles with differing calcination treatments are reported. Transmission electron microscopy and X-ray diffraction analyses have, respectively, been used to study the morphology and to quantify the atomic amount of europium present in the optically active phases of the variously prepared nanomaterials. Rietveld analysis was used to quantify the constituting phases and to determinate the europium content. Silica particles with an approximate size of 30 nm were coated with 2 nm carbonate nanoparticles, prepared in situ on the surface of the silica core. Luminescence measurements revealed the role of different preparation methods and of europium-doping quantities on the optical properties observed.