Prediction of global vapor-liquid equilibria for mixtures containing polar and associating components with improved renormalization group theory

Our recently improved renormalization group (RG) theory is further reformulated within the context of density functional theory. To improve the theory for polar and associating fluids, an explicit and complete expression of the theory is derived in which the density fluctuation is expanded up to the third-order term instead of the original second-order term. A new predictive equation of state based on the first-order mean spherical approximation statistical associating fluid theory (FMSA-SAFT) and the newly improved RG theory is proposed for systems containing polar and associating fluids. The calculated results for both pure fluids and mixtures are in good agreement with experimental data both inside and outside the critical region. This work demonstrates that the RG theory incorporated with the solution of FMSA is a promising route for accurately describing the global phase behavior of complex fluids and mixtures.     

Asymmetric syntheses of α-amino acids via double chiral induction in alkylation of the ketimine derived from 2-hydroxypinan-3-one and menthyl glycinate

Asymmetric syntheses of (S)-α-amino acids in 28--98% optical yields via doublechiral induction in alkylations of ketimine 1 derived from (+)-2-hydroxypinan-3-one and (-)-men-thyl glycinate which is a chiral match pair have been studied. The factors controlling the diastereoselec-tivities in alkylation reactions of the ketimine, the properties of alkylating agents and various alkylationconditions are examined.     

An improved renormalization group theory for real fluids

On the basis of White's theory, an improved renormalization group (RG) theory is developed for chain bonding fluids inside the critical region. Outside the critical region, the statistical associating fluid theory based on the first-order mean sphere approximation [Fluid Phase Equilibria 171, 27 (2000)] is adopted and all the microscopic parameters are taken directly from its earlier application of real fluids. Inside the critical region, the RG transformation for long-range density fluctuation is derived in the k space, which illustrates explicitly the contributions from the mean-field term, the local density fluctuation, and the nonlocal density fluctuation. The RG theory is applied to describe physical behavior of ten n alkanes (C1-C10) both near to and far from the critical point. With no additional parameters for chain bonding fluids, good results are obtained for critical specific heat and phase coexistence curves and the resulting critical exponents are in good agreement with the reported nonclassic values.     

Laboratory authorization versus accreditation in transitional economies: case study of Serbia

Many CEE governments are still using various systems of laboratory authorization together with ISO/IEC 17025 laboratory accreditation. It is difficult to understand from the EU prospective, the existence of two parallel laboratory competence verification systems. The basic relations between laboratory accreditation and authorization: independence and succession have been defined. The case study of testing laboratory accreditation versus authorization in Serbia, has been presented and discussed. Relevant requests and procedures for water quality, food and air quality testing laboratory authorization were analysed in detail. Comparative analyses of accreditation and authorization have established: (i) independent relations, (ii) relevant regulation is in collision and barely legal, (iii) authorization is (technically) on the far lower level than accreditation is, and (iv) authorization requests cause high space and personnel costs. It has been concluded that it is not adequate to perform two policies at the same time: one EU oriented—laboratory accreditation, and one non-EU oriented—laboratory authorization. The policy proposal is that all CEE countries should abandon existing laboratory authorization procedures and replace them by accreditation. Proposed goal could be reached in rather a short transition process of 2–3 years.     

A Nozaki-Hiyama-Kishi Ni(II)/Cr(II) coupling approach to the phomactins

[reaction: see text] Through a unified synthetic strategy, appropriately functionalized bicyclic starting materials can be elaborated via Ni(II)/Cr(II) macrocylization to [9.3.1] bicycles. Elaboration of these core structures allows access to phomactin C/D analogues and establishes the first synthetic approach to phomactin A affording an intact octahydrochromene/macrocyclic ring system.     

High levels of mitochondrial DNA heteroplasmy in single hair roots: reanalysis and revision.

The present study demonstrates a reinvestigation of the mitochondrial DNA sequence heteroplasmy, which was previously found by the use of nested polymerase chain reaction (PCR) technique in single hairs of 13 individuals. The direct PCR approach was used for the amplification of mitochondrial DNA and a phylogenetic analysis was applied to both data sets for the verification of the authenticity of sequences. The comparative analysis of the sequencing results obtained from the same hair DNA extracts - but using two different techniques - shows that direct mitochondrial DNA amplification results in a considerably lower number of mixed positions. The majority of the confirmed heteroplasmic variants preferentially occurs in mitochondrial DNA hypervariable sites (mutational hotspots). However, the pattern of heteroplasmic mutations observed in four extracts after nested PCR significantly differs from the pattern of natural mutations. Some of these rare polymorphisms should be revised as inconsistent with phylogenetic expectations. The results of the present study contribute to the earlier reports by indicating that phylogenetic analysis is an effective tool in a posteriori quality check of mitochondrial DNA data.     

Interactions between the ganglioside GM1 and hexadecylphosphocholine (miltefosine) in monolayers at the air/water interface

The ganglioside, GM1, was studied as Langmuir monolayers at the air/water interface with surface pressure-area measurements in addition to Brewster angle microscopy. A characteristic plateau transition, observed on aqueous subphases of pH 2 and 6, 20 degrees C, at the surface pressure of ca. 20 mN/m, was attributed to the reorientation of GM1 polar group upon film compression. This transition was found to disappear at alkaline subphases (pH 10) due to the hydration of fully ionized polar group, hindering its reorientation. The interactions between GM1 and hexadecylphosphocholine (miltefosine) were investigated in mixed monolayers and analyzed with the mean molecular areas, excess areas of mixing and the excess free energy of mixing versus film composition plots. The monolayers stability, quantified by the collapse pressure values, as well as the strength of interaction was found to diminish in the following order: pH 6>pH 2>pH 10. The strongest interaction occurs for mixed films of miltefosine molar fraction, XM=0.7-0.8, especially at low pressure region, and are explained as being due to the surface complex formation of 3:1 or 4:1 (miltefosine:ganglioside) stoichiometry (XM=0.75 or 0.8, respectively).     

Growth of InP nanostructures via reaction of indium droplets with phosphide ions: synthesis of InP quantum rods and InP-TiO2 composites

InP quantum rods were synthesized via the reaction of monodispersed colloidal indium droplets with phosphide ions. In(0) droplets, which do not act as a catalyst but rather a reactant, are completely consumed. The excess electrons that are produced in this reaction are most likely transferred to an oxide layer at the indium surface. For the synthesis of InP quantum rods with a narrow size distribution, a narrow size distribution of In(0) particles is also required because each indium droplet serves as a template to strictly limit the lateral growth of individual InP nanocrystals. Free-standing quantum rods, 60, 120, or 150 A in diameter, with aspect ratios of 1.6-3.5, and without the residual metallic catalyst at the rod tip, were synthesized from the diluted transparent solution of metallic indium particles. The same approach was used to synthesize InAs quantum rods. A photoactive InP-TiO(2) composite was also prepared by the same chemical procedure; InP nanocrystals grow as well-defined spherical or slightly elongated shapes on the TiO(2) surface.     

Orientational changes in dipalmitoyl phosphatidyl glycerol Langmuir monolayers

Dipalmitoyl phosphatidyl glycerol (DPPG) as Langmuir monolayers at the air/water interface was investigated by means of surface pressure measurements in addition to Brewster angle microscopy (BAM) during film compression/expansion. A characteristic phase transition region appeared in the course of surface pressure-area (pi-A) isotherms for monolayers spread on alkaline water or buffer subphase, while on neutral or acidic water the plateau region was absent. This phase transition region was attributed to the ionization of DPPG monolayer. It has been postulated that the ionization of the phosphatidyl glycerol group leads to its increased solvation, which probably provokes both a change in the orientation of the polar group and its deeper penetration into bulk phase. Film compression along the transition region provokes the dehydration of polar groups and subsequent change of their conformation, thus causing the DPPG molecules to emerge up to the interface. Quantitative Brewster angle microscopy (BAM) measurements revealed that along the liquid-expanded to liquid-condensed phase transition the thickness of the ionized DPPG monolayer increases by 4.2 A as a result of the conformational changes of the ionized polar groups, which tend to emerge from the bulk subphase up to the surface.     

Iron complexes of 5,10,15,20-tetraphenyl-21-oxaporphyrin

The iron complexes of 5,10,15,20-tetraphenyl-21-oxaporphyrin (OTPP)H have been investigated. Insertion of iron(II) followed by one-electron oxidation yielded a high-spin, six-coordinate (OTPP)Fe(III)Cl(2) complex. The reduction of (OTPP)Fe(III)Cl(2) has been accomplished by means of moderate reducing reagents producing high-spin five-coordinate (OTPP)Fe(II)Cl. The molecular structure of (OTPP)Fe(III)Cl(2) has been determined by X-ray diffraction. The iron(III) 21-oxaporphyrin skeleton is essentially planar. The furan ring coordinates in the eta(1) fashion through the oxygen atom, which acquires trigonal geometry. The iron(III) apically coordinates two chloride ligands. Addition of potassium cyanide to a solution of (OTPP)Fe(III)Cl(2) in methanol-d(4) results in its conversion to a six-coordinate, low-spin complex [OTPP)Fe(III)(CN)(2)] which is spontaneously reduced to [OTPP)Fe(II)(CN)(2)](-) by excess cyanide. The spectroscopic features of [OTPP)Fe(III)(CN)(2)] correspond to the common low-spin iron(III) porphyrin (d(xy))(2)(d(xz)d(yz))(3) electronic configuration. Titration of (OTPP)Fe(III)Cl(2) or (OTPP)Fe(II)Cl with n-BuLi (toluene-d(8), 205 K) resulted in the formation of (OTPP)Fe(II)(CH(2)CH(2)CH(2)CH(3)). (OTPP)Fe(II)(n-Bu) decomposes via homolytic cleavage of the iron-carbon bond to produce (OTPP)Fe(I). The EPR spectrum (toluene-d(8), 77 K) is consistent with a (d(xy))(2)(d(xz))(2)(d(yz))(2)(d(z)(2)(1)(d[(x)(2)-(y)(2)])(0) ground electronic state of iron(I) oxaporphyrin (g(1) = 2.234, g(2) = 2.032, g(3) = 1.990). The (1)H NMR spectra of (OTPP)Fe(III)Cl(2), (OTPP)Fe(III)(CN)(2), ([(OTPP)Fe(III))](2)O)(2+), and (OTPP)Fe(II)Cl have been analyzed. There are considerable similarities in (1)H NMR properties within each iron(n) oxaporphyrin-iron(n) regular porphyrin or N-methylporphyrin pair (n = 2, 3). Contrary to this observation, the pattern of downfield positions of pyrrole resonances at 156.2, 126.5, 76.3 ppm and furan resonance at 161.4 ppm (273 K) detected for the two-electron reduction product of (OTPP)Fe(III)Cl(2) is unprecedented in the group of iron(I) porphyrins.