Determination of acetone, hexanal and heptanal in blood samples by derivatization with pentafluorobenzyl hydroxylamine followed by headspace single-drop microextraction and gas chromatography–mass spectrometry

In the study, we developed a simple, rapid, sensitive, and inexpensive method for determination of the disease biomarkers of acetone, hexanal and heptanal in human blood. For the first time, derivatization of carbonyls with O-2,3,4,5,6-(pentafluorobenzyl)hydroxylamine (PFBHA) was combined with headspace single-drop microextractin (HS-SDME) and gas chromatography-mass spectrometry (GC–MS) and applied to the analysis of acetone, hexanal, and heptanal in human blood. At first, acetone, hexanal and heptanal in blood were derivatized with PFBHA and formed oximes in several seconds. Sequentially, the oximes were headspace extracted and concentrated by a microdrop solvent. Finally, the extracted oximes were analyzed by GC–MS. HS-SDME conditions and method validations were studied. Due to needing of only 2 μl organic solvent, short extraction time of 8 min, and simple operation, derivatization-HS-SDME was shown to be a rapid, simple, and inexpensive technique for analysis of acetone, hexanal, and heptanal in human blood. Moreover, it had low detection limit values from 0.24 to 0.62 nM, and good reproducibility (R.S.D. less than 12%).     

电动势法测定Cu(Ⅰ)与乙炔生成配合物的热力学函数

乙炔与Cu(I)生成配合物的热力学函数文献报道鲜见,且不同作者的测定结果差异较大。本文用改进的电动势法。对在氯丁橡胶、聚氯乙烯,乙醛等工业过程有重大意义的Cu(I)与乙炔配合物进行测定,得到更合理的结果。     

The determination of intrinsic reaction coordinates by density functional theory

The first implementation of the intrinsic reaction coordinate (IRC ) method within the density functional theory (DFT ) framework is presented. The implementation has been applied to four different types of chemical reactions represented by the isomerization process, HCN ? HNC (A); the S_N2 process, H^? + CH₄ ? CH₄ + H^? (B); the exchange process, H˙ + HX ? HX + H˙ (X ? F,Cl) (C); and the elimination process, C₂H₅Cl ? C₂H₄ + HCl (D). The present study presents for each process optimized structures and calculated harmonic vibrational frequencies for the reactant(s), the transition state, and the product(s) along with the IRC path connecting the stationary points. The calculations were carried out within the local density approximation (LDA ) as well as the LDA/NL scheme where the LDA energy expression is augmented by Perdew's and Becke's nonlocal (NL ) corrections. The LDA and LDA/NL results are compared with each other as well as the best available ab initio calculations and experimental data. For reaction (D), ab initio calculations based on MP 2 geometries and MP 4SDTQ energies have been added due to the lack of accurate published post-HF calculations on this process. A detailed discussion is provided on the efficiency of the IRC algorithms, the relative accuracy of the DFT and ab initio schemes, as well as the reaction mechanisms of the four reactions. It is concluded that the LDA/NL scheme affords the same accuracy as does the MP 4 method. The post-HF methods seem to overestimate activation energies, whereas the corresponding LDA/NL estimates are too low. The LDA activation energies are even lower than the LDA/NL counterparts. The incorporation of the IRC method into the DFT framework provides a promising and reliable tool for probing the chemical reaction path on the potential energy surfaces, even for large-size systems. IRC calculations by ab initio methods of an accuracy similar to the LDA/NL scheme, such as the MP 4 scheme, are not feasible. © John Wiley & Sons, Inc.     

Homogeneous chemiluminescence system in neutral and near neutral aqueous solution with ClO2 as oxidant and its analytical application

Using ClO₂ as chemiluminescence (CL) oxidant, a novel homogeneous CL system in neutral and near neutral aqueous solution is proposed in this paper. ClO₂ could oxidize sulfite in pH 5.0–8.5 acetate buffer to produce CL emission, and pipemidic acid could sensitize the CL system. The ClO₂–SO₃²⁻–pipemidic acid reaction was used as a model CL system and explored the possibility of highly active and eco-friendly ClO₂ being used as CL oxidant in neutral and near neutral aqueous solution. Combined with flow-injection analysis, the proposed CL system was applied to the automated dissolution testing of pipemidic acid tablet. Compared with the common strong acidic or strong basic CL system, this proposed CL owns its advantages.     

A new piezoelectric response model for population growth of bacteria

A piezoelectric response model on the population growth of microorganism is proposed. This model is based on a novel population growth model, which has a more obvious ecological meaning and the fact that the series piezoelectric quartz crystal (SPQC) sensor responses to conductivity changes of the medium during the growth of the microorganism. From the response model four parameters can be obtained including the maximum specific growth rate mu(m), saturated population size N(m), and two constants C and K(1). The influence of the parameters on the response curve is discussed in which the influences of mu(m) and N(m) are more obvious. With the proposed model the quantitative determination of bacteria may be more accurate than the frequency detection time (FDT) method. Then the growth of Escherichia coliform (E. coli) monitored with a SPQC sensor is compared with the simulated growth curve obtained by the proposed model and a good agreement is obtained.     

Pulsed photothermal phase-shift spectroscopy for weak absorption measurement

A novel photothermal phase-shift spectroscopy configuration based on the retro-reflected beam interference has been developed and its operational principle is described. The weak absorption measurement ability of this technique is experimentally proven with a water/ethanol solution of standard Pyronine G dye and the limit of detection is found to be 1.8 x 10(-6) absorbance. Potential applications of the technique are discussed.     

代铬刷镀层的耐腐蚀机理的考察

对新型的代铬刷镀层Ni-Fe-W-P-S进行了耐腐蚀性能机理的分析研究。用扫描电镜(SEM)、透射电镜(TEM)、扫描隧道显微镜(STM)、X射线衍射及电子能谱(XPS)等的分析表明，基体组织为非品结构是代铬刷镀层优异耐腐蚀性的主要原因.     

Study on Arc Movement in Hollow Electrode Plasma Generators with Impressed Double Magnetic Fields

In order to prolong cathode lifetime of hollow electrode plasma generators, a method of impressed double magnetic fields with an alternating frequency is presented in this paper. The alternating frequency of the double magnetic fields is an important factor that influences the erosion rate on the area between the two coils' central planes. By analyzing the arc movement in the hollow cathode with a simplified theoretical model, the spiral curve shape of the radial arc and the relationship between the optimal alternating frequency and the intensity of magnetic fields are obtained. A photoelectric method is employed to measure the arc root rotation speed in the hollow cathode, and then the optimal alternating frequency is calculated as 319 Hz for the experimental conditions. The life testing with this alternating frequency showed that the cathode lifetime could be prolonged significantly.     

利用选择性激发核磁共振对混合物中的两种化合物进行结构解析

利用现代NMR的1D、2D技术对一个混合物进行了分析。结果表明：混合物由两种化合物组成。为了同时准确确定两种化合物的结构，本工作应用了1D-TOCSY技术，利用该技术选择性强的特点来补充常规的1D、2DHMR实验所提供的分子结构的信息。在没有进行预分离的条件下，顺利地完成了样品中两种化合物的核磁信号归属，并最终确定了它们的结构。