用偏光织构及透射光谱分析液晶器件的老化

对一组台式计算器液晶显示器进行了光辐照,研究了光辐照对液晶显示器件显示品质的影响。采用偏光显微镜观察到了辐照后液晶的偏光织构的变化,液晶中出现了平行的条纹状织构和失去消光作用的黑洞,随着接受光辐照时间的增加,黑洞数量越来越多,面积越来越大。通过由计算机控制的双光束紫外-可见分光光度计测试了透射光谱的变化,发现其透射率随着接受光辐照时间的增加而降低。分析结果表明,条纹状织构和黑洞的出现是由于液晶分子结构在紫外线的照射下发生了变化所致,失去消光作用的黑洞是导致液晶器件透射率持续下降的主要原因。     

X射线荧光分析中X射线管原级能谱分布的测定

确切知道X射线管激发的原级能谱分布是X射线荧光分析中的一个重要前提,所用能谱分布函数的准确度大大影响了最终的测量结果。提出利用间接测量法,选用合适的参量模型来描述X射线的原级能谱分布。依靠实验测得的厚靶纯元素样品的荧光强度,利用已知的理论公式,建立非线性方程,优化得到参量模型中的参量值。通过比较实验测得的元素的荧光强度值和利用得到的能谱分布函数计算的理论值,证明此种方法是可行的。     

Characterisation of Flavour Attributes in Egg White Protein Using HS-GC-IMS Combined with E-Nose and E-Tongue: Effect of High-Voltage Cold Plasma Treatment Time

Egg white protein (EWP) is susceptible to denaturation and coagulation when exposed to high temperatures, adversely affecting its flavour, thereby influencing consumers’ decisions. Here, we employ high-voltage cold plasma (HVCP) as a novel nonthermal technique to investigate its influence on the EWP’s flavour attributes using E-nose, E-tongue, and headspace gas-chromatography-ion-mobilisation spectrometry (HS-GC-IMS) due to their rapidness and high sensitivity in identifying flavour fingerprints in foods. The EWP was investigated at 0, 60, 120, 180, 240, and 300 s of HVCP treatment time. The results revealed that HVCP significantly influences the odour and taste attributes of the EWP across all treatments, with a more significant influence at 60 and 120 s of HVCP treatment. Principal component analyses of the E-nose and E-tongue clearly distinguish the odour and taste sensors’ responses. The HS-GC-IMS analysis identified 65 volatile compounds across the treatments. The volatile compounds’ concentrations increased as the HVCP treatment time was increased from 0 to 300 s. The significant compounds contributing to EWP characterisation include heptanal, ethylbenzene, ethanol, acetic acid, nonanal, heptacosane, 5-octadecanal, decanal, p-xylene, and octanal. Thus, this study shows that HVCP could be utilised to modify and improve the EWP flavour attributes.     

Enhanced Sunscreen Effects via Layer-By-Layer Self-Assembly of Chitosan/Sodium Alginate/Calcium Chloride/EHA

The sunscreen nanocapsules were successfully synthesized by the way of layer-by-layer self-assembly using charged droplets (prepared by emulsification of LAD-30, Tween-80 and EHA (2-Ethylhexyl-4-dimethylaminobenzoate)) as templates. Chitosan/sodium alginate/calcium chloride were selected as wall materials to wrap EHA. The emulsions with the ratio of Tween-80 to EHA (1:1) were stable. A stable NEI negative emulsion can be obtained when the ratio of Tween-80 and LAD-30 was 9:1. Chitosan solutions (50 kDa, 0.25 mg/mL) and sodium alginate solutions (0.5 mg/mL) were selected to prepare nanocapsules. The nanocapsules were characterized via some physico-chemical methods. Based on the synergistic effects of the electrostatic interaction between wall materials and emulsifiers, EHA was effectively encapsulated. DLS and TEM showed that the sunscreen nanocapsules were dispersed in a spherical shape with nano-size, with the increasing number of assembly layers, the size increased from 155 nm (NEI) to 189 nm (NEII) to 201 nm (NEIII) and 205 nm after solidification. The release studies in vitro showed sustained release behavior of the nanocapsules were observed with the increase of the number of deposition layers, implying a good coating effect. The sunscreen nanocapsules could control less than 50% the release of EHA after crosslinking of calcium chloride and sodium alginate, which also could effectively avoid the stimulation of the sun protection agent on the skin.     

Efficient deep blue organic light emitting diodes based on [2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)-7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g]quinoline] derivatives

Abstract

In this study, as the ongoing effort to develop efficient blue OLEDs, two deep blue emitters based on indenoquinoline-substituted anthracene derivatives have been synthesized and characterized. Multilayer organic light emitting diodes were fabricated with the following sequence: indium-tin-oxide (ITO)/4,4’,4’’-tris[2-naphthyl(phenyl)amino (2-TNATA)/4,4’-bis(N-(1-naphthyl)-N-phenylamino) biphenyl (NPB)/Blue emitting materials/Bathophenanthroline (Bphen)/lithium quinolate (Liq)/Al. All the devices showed efficient blue emissions. Particularly, a device using ‘2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)?7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g] quinoline’ as an emitter showed a maximum external quantum efficiency (EQE) of 4.92% with the Commission Internationale De L’Énclairage (CIE) coordinates of (0.15, 0.10) at 8.0?V.     

Analysis and optimisation of grooved parallel slider bearings with cavitation

Meccanica - This paper introduces an analytical approach to optimize the textured bearing with cavitation to improve the load support. For this purpose, a grooved parallel slider bearing is...     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

Global and local performance metric with inertia effects

Nonlinear Dynamics - A complex system’s structural–dynamical interplay plays a profound role in determining its collective behavior. Irregular behavior in the form of macroscopic chaos,...     

Bifurcations and dynamics of a plant disease system under non-smooth control strategy

Nonlinear Dynamics - Mathematical models and analyses can assist in designing the control strategies to prevent the spread of infectious disease. The present paper investigates the bifurcations and...