非水毛细管电泳测定黄连饮片中5种生物碱

建立了一种非水毛细管电泳(NACE)同时测定黄连饮片生品与炮制品中小檗碱、巴马汀、药根碱、木兰碱和黄连碱含量的方法。分别考察了非水溶剂、缓冲液体系及其浓度和pH、运行电压、运行温度和检测波长等条件对实验结果的影响。在优化的实验条件下,选择非水毛细管电泳分离模式,以40 mmol/L乙酸钠-40 mmol/L乙酸铵的无水甲醇缓冲溶液(pH 5.8)为电泳介质,未涂渍标准熔融石英毛细管(64.5 cm×75 μm,有效长度56 cm)为分离通道,检测波长为254 nm,分离电压为25 kV,压力进样(5 kPa×6 s),柱温为20 ℃。结果显示,5种生物碱在20 min内可实现基线分离,加标回收率为98.37%～101.03%。该方法简单、准确,重现性较好,可用于黄连饮片内在质量的评价和控制。     

聚苯胺膜电极在苯胺单体聚合反应中的电催化性能

自从第一个导电高聚物掺碘的聚乙炔问世以来［1］,人们又陆续开发研制了聚 苯胺(PAn)、聚吡咯和聚噻吩等导电高分子材料. 在众多的导电高分子材料中,聚苯胺以其原 料廉价易得,制备方法简便,导电性能优良,耐高温及抗氧化性能良好等优点而成为最具应用 前景的品种之一. 迄今为止,有关聚苯胺的链结构,掺杂反应,以及导电机理等基础理论方面 的研究已有大量的文献和综述报道［2～6］. 这些基础理论的研究为其应用研究奠定 了坚实的基础. 早在60年代,人们就发现,聚苯胺对氧化亚氮分解及丁二烯异构化反应具有独 特的催化作用;同时,聚苯胺具有超出几何表面的活性表面,故可对某些反应具有选择性的催 化作用. 因此,人们开始研究聚苯胺膜电极对某些电极反应的电催化性能［7～12］. 我国科学工作者在这一领域也做了许多有益的工作,如董绍俊等［13］研究了聚苯胺 膜修饰电极对抗坏血酸的电催化氧化,罗维忠等［14］研究了聚苯胺膜电极对Fe(Ⅱ) 和Sb(Ⅲ)的电催化作用. 本文主要讨论了扫描速度、苯胺单体浓度及温度对聚苯胺膜电极在 苯胺单体聚合过程中电催化性能的影响,为利用聚苯胺处理含苯胺废水提供了一定的理论依 据.     

Transport mechanisms of contaminants released from fine sediment in rivers

Contaminants released from sediment into rivers are one of the main problems to study in environmental hydrodynamics. For contaminants released into the overlying water under different hydrodynamic conditions, the mechanical mechanisms involved can be roughly divided into convective diffusion, molecular diffusion, and adsorption/desorption. Because of the obvious environmental influence of fine sediment( D90 = 0.06 mm), non-cohesive fine sediment, and cohesive fine sediment are researched in this paper, and phosphorus is chosen for a typical adsorption of a contaminant. Through theoretical analysis of the contaminant release process, according to different hydraulic conditions, the contaminant release coupling mathematical model can be established by the N–S equation, the Darcy equation,the solute transport equation, and the adsorption/desorption equation. Then, the experiments are completed in an open water flume. The simulation results and experimental results show that convective diffusion dominates the contaminant release both in non-cohesive and cohesive fine sediment after their suspension, and that they contribute more than 90 % of the total release. Molecular diffusion and desorption have more of a contribution for contaminant release from unsuspended sediment. In unsuspension sediment, convective diffusion is about 10–50 times larger than molecular diffusion during the initial stages under high velocity; it is close to molecular diffusion in the later stages. Convective diffusion is about 6 times larger than molecular diffusion during theinitial stages under low velocity, it is about a quarter of molecular diffusion in later stages, and has a similar level with desorption/adsorption. In unsuspended sediment, a seepage boundary layer exists below the water–sediment interface,and various release mechanisms in that layer mostly dominate the contaminant release process. In non-cohesive fine sediment, the depth of that layer increases linearly with shear stress. In cohesive fine sediment, the range seepage boundary is different from that in non-cohesive sediment, and that phenomenon is more obvious under a lower shear stress.     

Multiple-relaxation-time lattice Boltzmann model for generalized Newtonian fluid flows

The generalized Newtonian fluid, as an important kind of non-Newtonian fluids, has been widely used in both science and engineering. In this paper, we present a multiple-relaxation-time lattice Boltzmann model for generalized Newtonian fluid, and validate the model through a detailed comparison with analytical solutions and some published results. The accuracy and stability of the present model are also studied, and compared with those of the popular single-relaxation-time lattice Boltzmann model. Finally, the limit and potential of the multiple-relaxation-time lattice Boltzmann model are briefly discussed.     

A compact interferometer insensitive to scanning speed variations

A compact moving optical-wedge interferometer (CMOWI) is presented. This device consists of a moving optical wedge (MOW), a fixed optical wedge (FOW), a fixed compensating plate, and a beam-splitting cube. The optical path difference (OPD) is calculated and analyzed. The factor between the OPD and the displacement of the MOW is less than 1 if the refractive index and wedge angle of the MOW and FOW are chosen properly. Therefore, the CMOWI is insensitive to scanning speed variations compared with the traditional Michelson interferometer. The CMOWI is compact, small-sized, and suitable for low-resolution Fourier transform spectroscopy.     

Chemical differentiation of volatile compounds in crude and processed Atractylodis Macrocephalae Rhizoma by using comprehensive two‐dimensional gas chromatography with time‐of‐flight mass spectrometry combined with multivariate data analysis

In the present study, comprehensive 2D GC—TOF‐MS combined with multivariate data analysis was applied to analyze the differences of the volatile components in crude and processed Atractylodis Macrocephalae Rhizoma (AMR) samples. As a result, 26 compounds that were found in crude AMR samples disappeared in processed AMR samples, and 19 compounds were newly generated and identified in AMR after processing with wheat bran. Meanwhile, principal component analysis demonstrated that there were significant chemical differences between crude and processed AMR samples, and processing procedure caused obvious quantitative and qualitative changes of volatile components in AMR. The established method could be used to explain the chemical differentiation between crude and processed AMR, and to further understand the processing mechanism of herbal medicines.     

Ultra-performance liquid chromatography coupled with high-resolution quadrupole time-of-flight mass spectrometry analysis of the impact of bran-processing on the chemical profile of Radix Paeoniae Alba (Baishao)

In this study, a rapid and versatile ultra-performance liquid chromatography coupled with high-resolution quadrupole time-of-flight mass spectrometry-based chemical profiling approach was applied to evaluate chemical constitution of crude and processed Radix Paeoniae Alba (RPA) samples. A total of 44 compounds were identified, among which the contents of 9 compounds in processed samples were obviously decreased and 8 compounds were increased. Furthermore, compound 28 was not found in RPA sample after stir-frying with wheat bran. The proposed method provided a chemical basis for exploring the processed mechanism of herbal medicine.     

Evaluation of the influence of sulfur fumigation on the pharmacokinetics of four active ingredients in Si Wu Tang

Sulfur fumigation may induce the decrease or the chemical transformation of some active ingredients of traditional Chinese medicines in vitro. Whether sulfur fumigation can cause the pharmacokinetic changes of the active ingredients in vivo is related to the efficacy and the safety of Chinese medicines’ application clinically. A sensitive, specific, and accurate method for the simultaneous determination of paeoniflorin, ferulic acid, senkyunolide A, and senkyunolide I in rat plasma by ultra high performance liquid chromatography coupled with triple quadrupole mass spectrometry was developed to evaluate the influence of sulfur fumigation to Si Wu Tang for the first time. Each compound was extracted from plasma samples by liquid–liquid extraction with ethyl acetate, and the chromatographic separation was accomplished on an Agilent Extend C₁₈ column with a linear gradient elution. The mass spectrometric detection and analysis were performed by using an AB Sciex triple quadrupole 5500 mass spectrometer in multiple reaction monitoring mode. The validated method was successfully applied to a pharmacokinetic study of four compounds in rats after oral administration of sun‐dried and sulfur‐fumigated Si Wu Tang. The results provided a meaningful basis for evaluating the affection of sulfur fumigation to the clinical application and the efficacy of Si Wu Tang.     

Quality control of processed Crataegi Fructus and its medicinal parts by ultra high performance liquid chromatography with electrospray ionization tandem mass spectrometry

Crataegi Fructus, an edible food, has been used as a traditional medicine to treat diseases for many years. There is substantial evidence that multiple constituents are responsible for the beneficial effects of Crataegi Fructus. To effectively control the quality of this herbal medicine, we developed an ultra high performance liquid chromatography with electrospray ionization tandem mass spectrometry protocol to simultaneously quantify ten compounds (chlorogenic acid, procyanidin B2, l ‐epicatechin, glucosylvitexin, vitexin‐2‐O‐rhamnoside, vitexin, rutin, hyperoside, isoquercitrin, and quercetin) in Crataegi Fructus. Multiple‐reaction monitoring was used for the quantification in the negative mode for 8 min. This proposed method is simple, reliable, sensitive, and specific. Further, the quantification parameters, including linearity, limit of detection, limit of quantification, precision, reproducibility, stability, and accuracy were optimized. The quality of the processed samples of Crataegi Fructus was evaluated using this method. Additionally, the method was successfully used to distinguish the medicinal components, including peel, kernel, and flesh. The data described in this study offer valuable information for the quality control and proper use of Crataegi Fructus.