Quantification of analytes in overlapping peaks from capillary electrophoresis using multivariate curve resolution-alternating least squares methods

Application of multivariate curve resolution with alternating least squares (ALS) methods to second-order data from capillary electrophoresis diode array detector (CE-DAD) is shown. Second-order data are easily obtained by setting individual data matrix of CE run one in top of the other. Initial qualitative solutions obtained by evolving factor analysis can be further optimized by simultaneous analysis of multiple electrophoresis run data with ALS regression. Quantification is achieved by the comparison of the analyte peak areas with that of pure standards. During the ALS regression procedure, the following constraints were applied: (i) both concentrations and unit pure spectra of the resolved components must be positive; (ii) elution profiles have an unimodal shape; (iii) correspondence exists between common species in the different data matrices; (iv) the pure spectrum of each species is the same in all runs where it is present. The above methods were applied for the determination of dinitrotoluene (DNT) isomeric compounds in overlapping peaks from CE.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

Liquid–liquid equilibria for the quaternary system methyl isobutyl ketone–water–phenol–hydroquinone

Liquid–liquid equilibria data of the quaternary system methyl isobutyl ketone (MIBK)–water–phenol–hydroquinone were measured at 25 °C under atmosphere pressure. The experimental data were correlated with the UNIQUAC and NRTL activity coefficient models on the base of the fixed binary interaction parameters that were obtained from two sub-ternary systems MIBK–water–phenol and MIBK–water–hydroquinone. The root mean square deviations (RMSD) show that the regressed results for the quaternary system were in good agreement with the experimental data for both UNIQUAC and NRTL models. The comparison between experimental and calculated distribution coefficient values of phenol and hydroquinone shows that a relative deviation of less than 5% is obtained.     

固载Ru基催化剂上二氧化碳加氢合成甲酸Ⅱ反应条件对催化剂性能的影响

The synthesis of formic acid from carbon dioxide and hydrogen using a silica immobilized ruthenium catalyst as precursor has been studied in different reaction conditions. The results revealed that the TOF （turn over frequency） of HCOOH achieved 1481.5 h^-1 on immobilized ruthenium catalyst near the critical pressure point of CO2 with H2 pressure of 4.0 MPa, reaction temperature of 80℃ and PPh3/Ru molar ratio of 6：1. The reaction activity of immobilized catalyst was higher than that of homogeneous catalyst, and the immobilized catalyst also offered the practical advantages such as easy separation and reuse.     

Methotrexate-loaded biodegradable polymeric micelles: preparation, physicochemical properties and in vitro drug release

Polymeric micelles based on amphiphilic diblock copolymers methoxy poly(ethylene glycol)-polylactide with various hydrophobic lengths were designed as carriers of poorly water-soluble anticancer drug methotrexate (MTX). Relationship between physicochemical characteristics of micelles and release behavior was explored. The critical micelle concentration was determined by fluorescence spectroscopy using 9-chloromethyl anthracene as fluorescence probe. Core-shell type polymeric micelles were prepared by free-surfactant dialysis technique. The mean size of micelles loaded with MTX was 50-200 nm with narrow polydispersity. Physicochemical properties of drug-loaded micelles were evaluated. In vitro release behavior of MTX was also investigated. MTX was continuously released from micelles and less than 50% MTX was released in 5 days. Release rate was dependent on chemical structures of micelles and enhanced by decreasing polylactide lengths.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.     

Rearrangement of symmetrical dicubane clusters into topological analogues of the P cluster of nitrogenase: nature's choice?

Reaction schemes have been developed that lead to clusters having the topology of the PN cluster of nitrogenase. The single cubane clusters [(Tp)MFe3S4Cl3]z (M = Mo, z = 1-; M = V, z = 2-) react with PEt3 to give [(Tp)MFe3S4(PEt3)3]1+, which are reduced to the neutral edge-bridged double cubanes [(Tp)2M2Fe6S8(PEt3)4] with highly reduced (2[MFe3S4]1+) cores. Reaction of these clusters in acetonitrile with (Et4N)(HS) results in the formation of [(Tp)2Mo2Fe6S9(SH)2]3- and [(Tp)2V2Fe6S9(SH)2]4-. X-ray structures of the Et4N+ salts reveal the bridging pattern M2Fe6(mu2-S)2(mu3-S)6(mu6-S) in which two cuboidal MFe3(mu3-S)3 units share the common bridge atom mu6-S and are externally bridged by two mu2-S atoms. The M sites possess trigonal octahedral, and the Fe sites, distorted tetrahedral coordination. Hydrosulfide ligands and sulfide atoms simulate terminal cysteinate ligation and mu2 bridges, respectively, in the protein-bound cluster Fe8S7(mu2-SCys)2(SCys)4. The synthetic clusters have the same bridging pattern as the PN cluster and approach congruency with it. These clusters are the first molecular topological analogues of a PN cluster. Like the latter, they are substantially reduced (majority of Fe(II)).     

Flow-injection chemiluminescence determination of quinine using on-line electrogenerated cobalt(III) as oxidant

A novel chemiluminescence (CL) flow system for the determination of quinine is described. It is based on the direct chemiluminescence reaction of quinine and cobalt(III) in sulfuric acid medium. The unstable Co(III) was on-line electrogenerated by constant-current electrolysis. The chemiluminescence intensity was linear with a quinine concentration in the range of 0.1-100 mug ml(-1). The determination limit was 3.3x10(-8) g ml(-1). The whole process could be completed in 1 min. The proposed method is suitable for automatic and continuous analysis, and has been applied successfully to the analysis of quinine in pharmaceutical preparation.     

Potentiodynamic deposition of Prussian blue from a solution containing single component of ferricyanide and its mechanism investigation

Potentiodynamic techniques were used for the direct electrodeposition of Prussian blue nano-clusters from an acidic solution of ferricyanide. Electrochemical, EQCM, IR, AFM, and UV/vis measurements were carried out to characterize deposited nano-sized Prussian blue and to explore the formation mechanism. Results showed that ferricyanide could partially dissociate to free ferric and cyanide ions. The driving force of this dissociation is the formation of PB and the evolution of HCN. The optimal potential window for the potentiodynamic formation of PB from an acidic solution (pH 1.6) is between –0.5 V and 0.4 V. In addition, the influence of surface adsorption of CN^- ions on the formation of PB was discussed.Dedicated to Professor W. Vielstich on the occasion of his 80th birthday.     

Cucurbit[6]uril pseudorotaxanes: distinctive gas-phase dissociation and reactivity

Cucurbit[6]uril forms a doubly charged complex with 1,4-butanediammonium cation that is observed using electrospray ionization Fourier transform mass spectrometry. Such 1:1 complexes are not observed for the smaller cucurbit[5]uril, which forms a 2:1 ammonium:cucurbituril complex instead. The 1:1 complex with cucurbit[6]uril is difficult to fragment via collisional activation; when it does fragment, both breakup of the cucurbituril cage and loss of the amine are observed. Further, the complex reacts with tert-butylamine via slow adduction. In contrast, nonrotaxane analogues (such as doubly charged 2:1 complexes of either protonated 1,4-butanediamine or protonated ethylenediamine with cucurbit[6]uril) fragment via easy loss of the intact amine upon collisional activation and react with tert-butylamine via rapid displacement of the original amine. On the basis of stoichiometry, fragmentation behavior, and reactivity, we conclude that the doubly charged complex of cucurbit[6]uril with 1,4-butanediammonium is a gas-phase pseudorotaxane.