密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

L-proline promoted Ullmann-type reaction of vinyl bromides with imidazoles in ionic liquids

The Ullmann-type coupling reaction of vinyl bromides and imidazoles in ILs at 90-110 degrees C gave the corresponding N-vinylimidazoles in good to excellent yields by using L-proline as the ligand; the double bond geometry of the vinyl bromides was retained under the reaction conditions.     

p-CH3C6H4SR型硫醚与钯(II)配合物热分解反应动力学

热重分析(TG)和微商热重法(DTG)广泛应用于各个研究领域,用非等温热重法测定固体化合物的热分解动力学参数已有报导.许多作者提出各种不同的数据处理方法.本文用的ρ-CH_3C_6H_4SR 型硫醚对钯的萃取具有选择性好、分配比高、气味较小、易溶于脂肪烃类溶剂、易于合成、是很有发展前途的一类萃取剂.我们合成五种ρ-CH_3C_6H_4SR(R:n-C_4H_9,n-C_6H_(13),n-C_8H_(17),n-C_(10)H_(21),n-C_(12)H_(25))型硫醚与钯(Ⅱ)的配合物,用TG-DTG 法研究它们的热分解过程,用微商法(Freeman-Carroll 方程)及积分法(Coats-Redfern 方程)获得了这些配合物的热分解动力学参数.     

己烯在Ru(1010)表面价带电子特性研究

在200 K以下己烯（C6H12）可以在Ru()表面上以分子状态稳定吸附.偏振角分辨紫外光电子谱（ARUPS）结果表明,己烯分子在垂直于衬底表面并沿衬底表面<>晶向的平面内,己烯分子的轴向沿<>晶向倾斜.随着衬底温度的提高,到200 K以上,己烯分解生成新的碳氢化合物.己烯分解后,πCH分子轨道能级向高结合能方向移动了0.2 eV,同时己烯中C的1s能级向低结合能方向移动了 0.3 eV.     

水杨醛肟铜络合物中性载体高选择性水杨酸根电极的研究

采用合成的Schiff碱金属络合物水杨醛肟铜(Ⅱ)、锌(Ⅱ)、镍(Ⅱ)为中性载体制备阴离子选择性电极。结果表明水杨醛肟铜(Ⅱ)对水杨酸根(Sal-)具有高选择性及优良的电位响应性能,电极呈现反Hofmeister选择性行为,其选择性次序为Sal->ClO4->SCN->I->NO2->NO3->Br->Cl->OAc->SO42-。采用交流阻抗技术和紫外可见光谱技术研究了电极的响应机理。该电极具有响应快、重现性好、检出限低和制备简单等优点。将电极用于药品及人体尿液分析,结果令人满意。     

A New Diterpene Acid from the Flowers of Heteropappus altaicus

A new compound, named heteraltaic acid was isolated from the flowers of Heteropappus altaicus (willd) Novopokr. The compound was elucidated as (5R, 6S, 8aS) -5-[2-(3-furyl) ethyl-5, 6, 8a-trimethyl-4a, 5, 6, 7, 8, 8a -hexahydro-l-naphthalenecarboxylic acid] by the combination of 1D and 2D NMR techniques (HSQC, HMBC) and X-ray analysis.     

Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC–ICP-MS

A mild, efficient and convenient extraction method of using 2-mercaptoethanol contained extractant solution combined with an incubator shaker for determination of mercury species in biological samples by HPLC–ICP-MS has been developed. The effects of the concentration of 2-mercaptoethanol, the composition of the extractant solution and the shaking time on the efficiency of mercury extraction were evaluated. The optimization experiments indicated that the quantitative extraction of mercury species from biological samples could be achieved by using 0.1% (v/v) HCl, 0.1% (v/v) 2-mercapoethanol and 0.15% (m/v) KCl extractant solution in an incubator shaker for shaking overnight (about 12 h) at room temperature. The established method was validated by analysis of various biological certified reference materials, including NRCC DOLT-3 (dogfish liver), IAEA 436 (tuna fish), IAEA MA-B-3/TM (garfish filet), IAEA MA-M-2/TM (mussel tissue), GBW 08193 (bovine liver) and GBW 08572 (prawn). The analytical results of the reference materials were in good agreement with the certified or reference values of both methyl and total mercury, indicating that no distinguishable transformation between mercury species had occurred during the extraction and determination procedures. The limit of detection (LOD) for methyl (CH₃Hg⁺) and inorganic mercury (Hg²⁺) by the method are both as 0.2 μg L⁻¹. The relative standard deviation (R.S.D.s) for CH₃Hg⁺ and Hg²⁺ are 3.0% and 5.8%, respectively. The advantages of the developed extraction method are that (1) it is easy to operate in HPLC–ICP-MS for mercury species determination since the extracted solution can be directly injected into the HPLC column without pH adjustment and (2) the memory effect of mercury in the ICP-MS measurement system can be reduced.     

Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La_0.7−x Ce_xMg_0.3Ni_2.8Co_0.5 (x = 0.1–0.5) alloy, Ti_0.25−x Zr_xV_0.35Cr_0.1Ni_0.3 (x = 0.05–0.15) alloy and AB_3<x<5-type alloy, which are the representative examples of AB₃-type alloy, solid solution alloy and non-AB₅-type alloy, respectively, have been investigated, and the performances of MH-Ni battery in which AB_3<x<5 type alloy is used as the negative electrode material are examined at relatively low temperature.     

SOLAR SPECTRAL IRRADIANCE IN THE VISIBLE AND INFRARED REGIONS

Abstract— The analytical formulas previously developed for estimating the spectral irradiance reaching the ground in the ultraviolet are extended into the visible and infrared(350–3000 nm). This approach has two distinct features: (1) all physical inputs for calculating the direct irradiance are given in analytical form, and (2) the diffuse spectral irradiance (skylight) is calculated using dimensionless ratios which relate it to the direct irradiance. In common with other approaches, the global spectral irradiance for arbitrary ground reflectivity is calculated from the sum of the direct and diffuse spectral irradiances and a divisor which depends upon the ground and air spectral reflectivities. The global spectral irradiance on a tilted surface may also be calculated in terms of the above quantities and two angles. As in the case of the ultraviolet, the formulas presented are intended for photobiological applications.     

三乙胺与2-氯-5-甲氧基对苯醌光电子转移反应的CIDNP研究

用化学诱导动态核极化（CIDNP）方法研究了三乙胺与2-氯-5-甲氧基对苯醌在 C6D6，CH3CN溶剂中的反应机理，实验结果表明反应过程中首先形成基态电荷转移 络合物（CTC），在CD3CN中，光照电荷分离形成离子自由基对，使三乙胺亚甲基产 生发射极化信号。同时用UV-vis实验证实CTC的存在。