The preparation and properties of bulk-heterojunction organic solar cells with indole-containing fulleropyrrolidine derivatives as acceptors

Two indole-containing fullerene derivatives, N-hydrogen-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (EHIHC60P), and N-(2-ethylhexylindolyl))-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (DEHIC60P) were synthesized by the typical Prato reaction. The absorption spectra, electrochemical properties of the two compounds were measured. Inverted solar cells were fabricated with the structure of ITO/ZnO/poly(3-hexylthiophene) (P3HT):fullerene derivatives/MoO₃/Ag. The highest power conversion efficiencies (PCEs) of 3.32% and 3.23% were obtained for P3HT/EHIHC60P and P3HT/DEHIC60P based solar cells at the composite ratio of 1:1 after the active layers were annealed at 150 °C under inert atmosphere, with a open-circuit voltage (V_oc) of 0.66 V and 0.74 V, respectively. For comparison, the device based on P3HT/PCBM at the same conditions showed the PCE of 3.28%, with a V_oc of 0.61 V. The influence on the photovoltaic property of the fullerene derivatives, which was induced by some subtle changes in the chemical structure was compared and discussed.     

The Influences of Polymers and Temperature on the Foam Properties of 3‐Dodecylalkoxyl‐2‐hydroxylpropyl Trimethylammonium Chloride

The foam performances of 3‐dodecoxy‐2‐hydroxypropyl trimethylammonium chloride (C₁₂TAC) have been determined in the existence of different relative amount of polymer. The experimental results show that the foaming ability of the mixture systems of the C₁₂TAC/PEG and C₁₂TAC/PVP is stronger than that of the surfactant solutions in the absence of polymer, and with the increase of relative amount of polymer both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced. For the aqueous solution of the surfactant, effect of temperature on foaming properties has also been examined. The results show that both the foaming ability and stability of the foams of the surfactant solutions are highest (or strongest) at 30°C.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Like (CO)4, Do (CS)4 and (CSe)4 Have a Triplet Ground State?

Cyclobutane‐1,2,3,4‐tetraone, (CO)₄, was computationally predicted and, subsequently, experimentally confirmed to have a triplet ground state, in which a b_2g σ MO and an a_2u π MO were each singly occupied. In contrast, the (U)CCSD(T) calculations reported herein found that cyclobutane‐1,2,3,4‐tetrathione, (CS)₄, and cyclobutane‐1,2,3,4‐tetraselenone, (CSe)₄, both had singlet ground states, in which the b_2g σ MO was doubly occupied and the a_2u π MO was empty. Our calculations showed that both the longer C?X distances and smaller coefficients on the carbon atoms in the b_2g and a_2u MOs of (CS)₄ and (CSe)₄ contributed to the difference between the ground states of these two molecules and the ground state of (CO)₄. An experimental test of the prediction of a singlet ground state for (CS)₄ is proposed.     

基于RFID的智能跟踪机器人的设计

针对国内各种智能机器人的智能跟踪难这一现状,设计出一种基于RFID技术的智能跟踪的机器人,能实现对携有特定电子标签的目标进行实时跟踪。该机器人以STC89C51单片机为核心,采用有源RFID读写器(HR6020C)和电子标签(WS-HT06)构建定位系统,采用单片机控制L298来驱动机器人的两个后轮,整个系统通过单片机进行整合、计算、处理数据,并发出指令,控制机器人对目标进行跟踪,进而达到机器人的智能跟踪的目的。实验结果表明,该机器人达到了智能跟踪的要求。     

The synthesis of a new cardiac sympathetic nerve imaging agent N-[11C]CH3-dopamine and biodistribution study

In this study, we synthesized and characterized N-[¹¹C]methyl-dopamine ([¹¹C]MDA) for cardiac sympathetic nerve imaging. [¹¹C]MDA was synthesized by direct N-methylation of dopamine with [¹¹C]methyl iodide and purified by semi-preparation reverse high pressure liquid chromatography (HPLC). The total synthesis time was 45 min including HPLC purification. The radiochemical yields of [¹¹C]MDA was 20 ± 3 %, without decay correction. The radiochemical purity was >98 % and the specific activity was about 50 GBq/mmol. The biological properties of [¹¹C]MDA were evaluated by biodistribution study in normal mice. PET imaging was performed in healthy Chinese mini-swines. Biodistribution study showed that [¹¹C]MDA had high myocardium uptake. PET/CT imaging showed [¹¹C]MDA had clear and symmetrical myocardium uptake, which was blocked obviously by injecting imipramine hydrochloride. [¹¹C]MDA would be a promising candidate of radiotracer for cardiac sympathetic nervous system imaging.     

A green strategy for lithium isotopes separation by using mesoporous silica materials doped with ionic liquids and benzo-15-crown-5

Three new mesoporous silica materials IL15SGs (HF15SG, TF15SG and DF15SG) doped with benzo-15-crown-5 and imidazolium based ionic liquids (C₈mim⁺PF₆ ^?, C₈mim⁺BF₄ ^? or C₈mim⁺NTf ₂ ^? ) have been prepared by a simple approach to separating lithium isotopes. The formed mesoporous structures of silica gels have been confirmed by transmission electron microscopy image and N₂ gas adsorption–desorption isotherm. Imidazolium ionic liquids acted as templates to prepare mesoporous materials, additives to stabilize extractant within silica gel, and synergetic agents to separate the lithium isotopes. Factors such as lithium salt concentration, initial pH, counter anion of lithium salt, extraction time, and temperature on the lithium isotopes separation were examined. Under optimized conditions, the extraction efficiency of HF15SG, TF15SG and DF15SG were found to be 11.43, 10.59 and 13.07 %, respectively. The heavier isotope ⁷Li was concentrated in the solution phase while the lighter isotope ⁶Li was enriched in the gel phase. The solid–liquid extraction maximum single-stage isotopes separation factor of ⁶Li–⁷Li in the solid–liquid extraction was up to 1.046 ± 0.002. X-ray crystal structure analysis indicated that the lithium salt was extracted into the solid phase with crown ether forming [(Li_0.5)₂(B15)₂(H₂O)]⁺ complexes. IL15SGs were also easily regenerated by stripping with 20 mmol L^?1 HCl and reused in the consecutive removal of lithium ion in five cycles.     

2,6,6-三甲基-双环[3,1,1]庚基-3-(4-芳基-2-噻唑)腙类化合物的合成及其抑菌和抗肿瘤活性研究

以α-蒎烯为起始原料,经加成、氧化、缩合制得中间体,继而与α-溴代芳基乙酮在常温下反应合成12个新型2,6,6-三甲基-双环[3,1,1]庚基-3-(4-芳基-2-噻唑)腙类化合物,产率达52.4%~88.9%.其结构经1H NMR,13C NMR,IR,LC/MS和元素分析进行了确证.初步生物活性测试结果表明:部分目标化合物具有较好的抑菌活性和一定的抗肿瘤活性.     

Simulation of nuclide migration in a middle- and low-level radioactive waste repository based on GMS

Journal of Radioanalytical and Nuclear Chemistry - Groundwater is the most important factor contributing to the diffusion and migration of radionuclides in the repository. In this paper, the...     

热熔灌输法制备三维骨架支撑金属锂复合负极

金属锂因具有极高的理论比容量(3860 mAh/g)和最低的电化学势(相对于标准氢电极为-3.04 V),被认为是下一代高比能锂离子电池的首选负极材料。然而,金属锂负极在电池循环过程中发生的刺状枝晶生长和体积变化等问题严重阻碍了其产业化应用进程。近年来研究表明,通过在金属锂中引入具有三维(3D)结构的宿主骨架,不但能有效抑制锂枝晶的生长,而且可以缓解金属锂负极的体积变化,从而提高金属锂电池的循环性能与安全性。因此,设计3D骨架/金属锂复合负极被认为是一种能有效解决金属锂问题的新兴策略。本文综述了热熔灌输法制备3D骨架/金属锂复合负极的研究进展。首先讨论了当前基于3D骨架的预存金属锂技术,然后着重分析了热熔灌输策略中3D骨架锂润湿性的影响因素,以及不同3D骨架修饰特征和改性方法。最后对3D骨架/金属锂复合负极和热熔灌输策略现存问题进行了总结并提出未来的发展方向。