Unusual vesicle-micelle transitions in a salt-free catanionic surfactant: temperature and concentration effects

The spontaneous formation of vesicles by the salt-free surfactant hexadecyltrimethylammonium octylsulfonate (TASo) and the features of an unusual vesicle-micelle transition are investigated in this work. In a previous work, we have shown that this highly asymmetric catanionic surfactant displays a rare lamellar miscibility gap in the concentrated regime. Here, we analyze in detail the aggregation behavior in the dilute regime (less than 3 wt % surfactant) as a function of both concentration and temperature. The phase diagram is dominated by a two-phase region consisting of a dispersion of a swollen lamellar phase (Lalpha') in the excess solvent phase (L1). Stable vesicles form in this two-phase region, and upon temperature increase, a transition to a single solution phase containing only elongated micelles occurs. The structural characterization of the aggregates and the investigation of their equilibrium properties have been carried out by light microscopy, cryo-TEM, water self-diffusion NMR, and SANS. Similarly to the lamellar-lamellar coexistence, the changes in microstructure at high dilution and high temperature can be understood from solubility differences, electrostatic interactions, and preferred aggregate curvature. Surface charge in the aggregates stems from the higher solubility of the octylsulfonate (So-) ion as compared to that of the hexadecyltrimethylammonium ion (TA+). Upon temperature increase, the ratio of free So(-) relative to the neutral TASo increases. Consequently, the surface charge density of the aggregates increases, and this ultimately induces a transition to a higher-curvature morphology (elongated micelles). Vesicles can also be spontaneously formed by cooling solutions from the micellar region, and the mean size obtained is practically independent of cooling rate, suggesting that dissociation/charge effects also control this process.     

Complete and unambiguous assignments of 1H and 13C chemical shifts of new arylamino derivatives of ortho-naphthofuranquinones

Six new nor-beta-lapachones have been synthesized from reaction of 3-bromo-nor-beta-lapachone with arylamines. These derivatives have potent anticancer properties against several cell lines. Here, we report complete unambiguous assignments of (1)H and (13)C chemical shifts of the new compounds. The assignments were made using a combination of one- and two-dimensional NMR techniques ((1)H, (13)C, (1)H-(1)H COSY, (1)H-(13)C HSQC, and (1)H-(13)C HMBC).     

A generic method to detect electrophilic intermediates using isotopic pattern triggered data-dependent high-resolution accurate mass spectrometry

A need still exists for a liquid chromatography/tandem mass spectrometry (LC/MS/MS) method that can detect broad classes of glutathione (GSH) conjugates and provide characterization of their structures. We now describe the development of a method that multiplexes high-resolution accurate mass analysis with isotope pattern triggered data-dependent product ion scans, for simultaneous detection and structural elucidation of GSH conjugates within a single analysis using a LTQ/Orbitrap. This method was initially developed to detect GSH conjugates generated from incubating 10 microM test compound with pooled human liver microsomes fortified with NADPH-regenerating system and a 2:1 ratio of 5 mM glutathione and [(13)C(2) (15)N-Gly]glutathione. The GSH conjugates were detected by isotope search of mass defect filtered and control subtracted full scan accurate MS data using MetWorks software. This was followed by elucidation of reactive intermediate structures using chemical formulae for both protonated molecules and their product ions from accurate masses in a single analysis. The mass accuracies measured for the precursor and product ions by the Orbitrap were <2 ppm in external mass calibration mode. Successful detection and characterization of GSH conjugates of acetaminophen, tienilic acid, clozapine, ticlopidine and mifepristone validated this method. In each case, the detected GSH conjugates were within the top five hits by isotope search. This method also has a broader detection capability since it is independent of the collision-induced dissociation behavior of the GSH conjugates. Furthermore, this method is amenable to a broad class of reactive intermediate trapping agents as exemplified by the simultaneous detection and structural elucidation of the cyano-N-methylene iminium ion conjugates of verapamil and its O-desmethyl metabolites, which we report for the first time. In addition to the chemically tagged reactive intermediates, this method also provides information on stable metabolites from the full scan accurate MS data.     

Structure and dynamics of a partially folded protein are decoupled from its mechanism of aggregation

A common strategy to study the mechanism of amyloid formation is the characterization of the structure and dynamics of the precursor state, which is in most cases a partially folded protein. Here we investigated the highly dynamic conformational state formed by the protein domain HypF-N at low pH, before aggregation, using fluorescence, circular dichroism, and NMR spectroscopies. The NMR analysis allowed us, in particular, to identify the regions of the sequence that form hydrophobic interactions and adopt an alpha-helical secondary structure in the pH-denatured ensemble. To understand the role that this residual structure plays in the aggregation of this protein, we probed the mechanism of aggregation using protein engineering experiments and thus identified the regions of the sequence of HypF-N that play a critical role in the conversion of this dynamic state into thioflavin T-binding and beta-sheet containing protofibrils. The combination of these two complementary approaches revealed that the aggregation of pH-denatured HypF-N is not structure-dependent, meaning that it is not driven by the regions of the protein that are either less or more protected in the initial partially folded state. It is, by contrast, promoted by discrete protein regions that have the highest intrinsic propensity to aggregate because of their physicochemical properties.     

Continuous monitoring of ascorbate transport through neuroblastoma cells with a ruthenium oxide hexacyanoferrate modified microelectrode

The uptake of ascorbate by neuroblastoma cells using a ruthenium oxide hexacyanoferrate (RuOHCF)-modified carbon fiber disc (CFD) microelectrode (r = 14.5 microm) was investigated. By use of the proposed electrochemical sensor the amperometric determination of ascorbate was performed at 0.0 V in minimum essential medium (MEM, pH = 7.2) with a limit of detection of 25 micromol L(-1). Under the optimum experimental conditions, no interference from MEM constituents and reduced glutathione (used to prevent the oxidation of ascorbate during the experiments) was noticed. The stability of the RuOHCF-modified electrode response was studied by measuring the sensitivity over an extended period of time (120 h), a decrease of around 10% being noticed at the end of the experiment. The rate of ascorbate uptake by control human neuroblastoma SH-SY5Y cells, and cells transfected with wild-type Cu,Zn-superoxide dismutase (SOD WT) or with a mutant typical of familial amyotrophic lateral sclerosis (SOD G93A), was in agreement with the level of oxidative stress in these cells. The usefulness of the RuOHCF-modified microelectrode for in vivo monitoring of ascorbate inside neuroblastoma cells was also demonstrated.     

Factorial analysis optimization of a Diltiazem kinetic spectrophotometric quantification method

A Diltiazem kinetic spectrophotometric method was optimized by factorial analysis. The experimental method is based on a two-stage reaction of Diltiazem with hydroxylamine and a ferric salt: in the first stage there is a hydroxamic acid formation; and, in the second stage there is a red colour complex ferric hydroxamate formation. The variables under investigation were: solvent; hydroxylamine, sodium hydroxide and ammonium ferric sulphate concentrations; volume of perchloric acid; and, temperature. The responses of the reactional system were the maximum absorbance, the wavelength and the reaction time at maximum absorbance. Experimental design methodologies were used in the optimization. Fractional and full factorial designs followed by optimization Box-Behnken and central composite experimental designs were used. The observed optimum conditions were: methanol as reaction solvent; hydroxylamine concentration of 9.375%; sodium hydroxide concentration of 18.750%; ferric reagent concentration of 2.000%; minimum volume of perchloric acid to neutralize the sodium hydroxide; and, room temperature as reaction temperature. With this set of experimental conditions a reaction time of 10.5 s with maximum colour development at 512 nm wavelength was achieved.     

Local order around rare earth ions during the devitrification of oxyfluoride glasses

Erbium L(3)-edge extended x-ray absorption fine structure (EXAFS) measurements were performed on rare earth doped fluorosilicate and fluoroborate glasses and glass ceramics. The well known nucleating effects of erbium ions for the crystallization of cubic lead fluoride (based on x-ray diffraction measurements) and the fact that the rare earth ions are present in the crystalline phase (as indicated by Er(3+) emission spectra) seem in contradiction with the present EXAFS analysis, which indicates a lack of medium range structural ordering around the Er(3+) ions and suggests that the lead fluoride crystallization does not occur in the nearest neighbor distance of the rare earth ion. Molecular dynamics simulations of the devitrification process of a lead fluoride glass doped with Er(3+) ions were performed, and results indicate that Er(3+) ions lower the devitrification temperature of PbF(2), in good agreement with the experimental results. The genuine role of Er(3+) ions in the devitrification process of PbF(2) has been investigated. Although Er(3+) ions could indeed act as seeds for crystallization, as experiments suggest, molecular dynamics simulation results corroborate the experimental EXAFS observation that the devitrification does not occur at its nearest neighbor distance.     

Identification of the optically active vibrational modes in the photoluminescence of MEH-PPV films

The temperature dependence of the photoluminescence properties of a thin film of poly[2-methoxy-5-(2(')-ethylhexyloxy)-p-phenylene-vinylene], MEH-PPV, fabricated by spin coating, is analyzed. The evolution with temperature of the peak energy of the purely electronic transition, of the first vibronic band, of the effective conjugation length, and of the Huang-Rhys factors are discussed. The asymmetric character of the pure electronic transition peak and the contribution of the individual vibrational modes to the first vibronic band line shape are considered by a model developed by Cury et al. [J. Chem. Phys. 121, 3836 (2004)]. The temperature dependence of the Huang-Rhys factors of the main vibrational modes pertaining to the first vibronic band allows us to identify two competing vibrational modes. These results show that the electron coupling to different vibrational modes depends on temperature via reduction of thermal disorder.     

Exposing the Oxygen-Centered Radical Character of the Tetraoxido Ruthenium(VIII) Cation [RuO4]+

The tetraoxido ruthenium(VIII) radical cation, [RuO₄]⁺, should be a strong oxidizing agent, but has been difficult to produce and investigate so far. In our X-ray absorption spectroscopy study, in combination with quantum-chemical calculations, we show that [RuO₄]⁺, produced via oxidation of ruthenium cations by ozone in the gas phase, forms the oxygen-centered radical ground state. The oxygen-centered radical character of [RuO₄]⁺ is identified by the chemical shift at the ruthenium M₃ edge, indicative of ruthenium(VIII), and by the presence of a characteristic low-energy transition at the oxygen K edge, involving an oxygen-centered singly-occupied molecular orbital, which is suppressed when the oxygen-centered radical is quenched by hydrogenation of [RuO₄]⁺ to the closed-shell [RuO₄H]⁺ ion. Hydrogen-atom abstraction from methane is calculated to be only slightly less exothermic for [RuO₄]⁺ than for [OsO₄]⁺.     

Super-Strong Hydrogel Composites Reinforced with PBO Nanofibers for Cartilage Replacement

Cartilage replacement materials exhibiting a set of demanding properties such as high water content, high mechanical stiffness, low friction, and excellent biocompatibility are quite difficult to achieve. Here, poly(p-phenylene-2,6-benzobisoxazole) (PBO) nanofibers are combined with polyvinyl alcohol (PVA) to form a super-strong structure with a performance that surpasses the vast majority of previously existing hydrogels. PVA–PBO composites with water contents in the 59–76% range exhibit tensile and compressive moduli reaching 20.3 and 4.5 MPa, respectively, and a coefficient of friction below 0.08. Further, they are biocompatible and support the viability of chondrocytes for 1 week, with significant improvements in cell adhesion, proliferation, and differentiation compared to PVA. The new composites can be safely sterilized by steam heat or gamma radiation without compromising their integrity and overall performance. In addition, they show potential to be used as local delivery platforms for anti-inflammatory drugs. These attractive features make PVA–PBO composites highly competitive engineered materials with remarkable potential for use in the design of load-bearing tissues. Complementary work has also revealed that these composites will be interesting alternatives in other industrial fields where high thermal and mechanical resistance are essential requirements, or which can take advantage of the pH responsiveness functionality.