Stable crack growth in aluminum tensile specimens

Post's white-light moiré interferometry was used to obtain sequential records of the transientU _y -displacement fields associated with stable crack growth in 7075-T6 and 2024-0, single-edge-notched (SEN) specimens with fatigued cracks. TheU _y -displacement fields are used to evaluate the crack-tip opening displacement (CTOD), far- and near-fieldJ-integral values, Dugdale-strip-yield model, William's polynomial function and the HRR field. Paper was presented at 1985 SEM Spring Converence on Experimental Mechanics held in Las Vegas, NV on June 9–14.     

钼铁硫原子簇化合物的合成与结构化学Ⅲ*以Fe(SR)6为桥的双立方烷化合物的磁学研究

以Fe(SR)₆为桥的系列钼铁硫双立方烷化合物(Et₄N)₄[(MoFe₃S₄(SR)₃)₂Fe(SR)₆],R=ph,o-tol,m-tol和p-tol的磁极矩和¹H-NMR数据作了报导和分析,并与类似的化合物作比较,讨论了它们的电子结构和磁结构。在类立方烷单元[MoFe₃S₄]中未配对电子有明显的离域性,过渡金属原子之间有很强的反铁磁偶合作用。整个分子形成三个基本上相互独立的磁性中心。     

超导纳米线单光子探测器

利用磁控溅射、电子束光刻和反应离子刻蚀等微加工技术,开展了超导纳米线单光子探测器(SNSPD)的研究.通过对SNSPD的设计和制备工艺参数的优化,成功制备出了高质量的SNSPD.单光子检测实验表明,制备的SNSPD对660 nm波长的光信号,系统检测效率可达30%,对1550 nm波长光信号,最大系统检测效率为4.2%.在平均暗计数小于10 c/s的情况下,系统检测效率大于20%(660 nm)和3%(1550 nm). 关键词： 单光子 氮化铌 纳米线 探测器     

Faraday镜预转角对FMOCT输出光偏振态的影响

通过计算机仿真,运用琼斯矩阵理论分析了Faraday镜预转角对法拉第镜式光学电流互感器输出光偏振态的影响.实验测量了Faraday镜实际预转角的大小,测量了外磁场的改变对Faraday镜预转角的影响.外磁场的存在和变化使Faraday镜预转角偏离初始值,并使系统输出光由理想状态下的线偏振光退化成椭圆偏振光,并引起法拉第镜式光学电流互感器工作灵敏度和稳定性的下降.提出了用电磁屏蔽解决外界磁场影响的方法.     

多光束在分形粗糙表面散射的仿真

采用矩量法(MOM),分析了多光束在分形粗糙导体表面的散射分布.对在不同入射角、光束宽度控制因子、光束照射区宽度、表面均方根高度和表面分维数情况下的散射进行了数值仿真.仿真结果表明了各参量的变化对散射分布的影响.根据仿真计算结果给出了最佳的散射测量区域,为减少多光束测量的误差提供了一定的参考.     

Investigation of the Doughnut Effect in Cy3-Labeled Protein Microarrays using Scanning Near-Field Optical Microscope

We demonstrate the fluorescence mapping of protein microarrays by the technique of scanning near-field optical microscopy (SNOM) and confocal microscopy. Micron sized spots (300 μm) of human Immunoglobulin G (hIgG) protein with and without a Cy3 dye labeling have been fabricated on glass substrates by an immobilization method which makes use of calixcrown derivatives termed Prolinker. We have also tried to probe into the well-known “doughnut effect” observed in fluorescence images of proteins using the SNOM technique. The topographic and fluorescence SNOM images revealed that the number of proteins at the boundary of the spot were more than at the center in the case of the microarray spot which showed brighter luminescence at the edge than at the center in the confocal image.     

Spectrally encoded slit confocal microscopy

A simple and cost-effective method for real-time imaging in confocal microscopy is proposed. Spectrally encoded slit confocal microscopy (SESCoM) uses a spectral encoding technique together with a confocal slit aperture to achieve two-dimensional images. Simulation and experimental results of the SESCoM's axial and lateral performances are presented. The measured FWHM of the axial response is 1.15 mum when an objective with a NA of 0.95 is used. FWHMs of the lateral line spread functions are measured to be 236 and 244 nm along the x and y directions, respectively. Both the axial and the lateral experimental results agree well with the simulation results.     

Optimum beamformer in correlated source environments

A new method for overcoming signal cancellation problems due to correlated interferences which occur in a minimum variance distortionless response beamformer is proposed. Instead of decorrelating the correlated interferences, the coherently combining signal-to-interference plus noise ratio (CC-SINR) beamformer regards them as replicas of the desired signal and coherently combines them with the desired signal. This method uses an eigenvector constraint that suppresses only noise and uncorrelated interferences but retains the desired signal and correlated interferences. The CC-SINR beamformer does not require any preliminary information on correlated interferences. The signal-to-interference plus noise ratio (SINR) of the proposed beamformer output was compared to that of a conventional SINR beamformer when correlated interference, uncorrelated interference, and white noise exist. In addition, various key parameters that affect the performance of the beamformer, such as signal-to-noise ratio, uncorrelated interference-to-noise ratio, angular separation between signals, attenuation factor, phase delay of correlated interference, and the number of sensors were analyzed. All of the experimental results were in good agreement with the analytical results.     

非傍轴平顶高斯光束M2因子两种定义的比较研究

基于功率密度的二阶矩方法,推导出了非傍轴平顶高斯(FG)光束束宽和远场发散角的解析表达式·研究表明,当w0/λ→0时,远场发散角趋于渐近值θmax=63.435°,与阶数无关·使用非傍轴高斯光束代替傍轴高斯光束作为理想光束,研究了非傍轴FG光束的M2因子,并与传统定义的M2因子作了比较·在非傍轴范畴,非傍轴FG光束的M2因子不仅与阶数N有关,而且与w0/λ有关·按照定义,当w0/λ→0时,非傍轴FG光束的M2因子不等于0,对阶数N=1,2,3时,M2因子分别趋于0.913,0.882和0.886·当N→∞时,M2因子取最小值M2min=0.816·     

长波红外无线激光通信脉冲宽度调制实验研究

为实现长波红外无线激光通信,建立了基于脉宽调制的长波红外无线激光通信系统模型,对系统性能进行了分析,给出了系统误码率的计算公式.搭建了实验系统,对CO_2激光器的平均输出光功率随占空比的变化情况进行了分析,对不同占空比条件下接收端对应的激光平均脉冲宽度以及脉冲宽度受噪声影响的随机变化情况进行了分析,得到了激光输出平均光功率、平均脉冲宽度与占空比之间的关系,以及脉宽的分布规律,并将实验结果与理论分析结果进行了对比,在此基础上得到了脉宽最佳判决门限和系统各类工作参数同误码率之间的关系.结果表明,基于CO_2激光器的脉冲宽度调制能够实现长波红外无线激光通信.