A concise synthesis and electrochemical behavior of functionalized poly(thieno[3,4-b]thiophenes): New conjugated polymers with low bandgap

New thieno[3,4-b]thiophene derivatives were prepared via a short and versatile synthetic route. Electrochemical studies of 2-heptenylthieno[3,4-b]thiophene, 2-styrylthieno[3,4-b]thiophene, and 2-phenyl-3-(thieno[3,4-b]thiophene-2-yl)acrylonitrile and the corresponding polymers revealed that raising the HOMO and lowering the LUMO can be attained by functionalizing thieno[3,4-b]thiophene with aromatic resonance-enhancing and electron-withdrawing groups. The bandgap of resulting polymers varied from 0.78 to 1.0 eV, indicating that poly(2-phenyl-3-(thieno[3,4-b]thiophene-2-yl)acrylonitrile) is one of the lowest bandgap polymers ever reported.     

Singlet and triplet potential surfaces for the O2+C2H4 reaction

Electronic structure calculations at the CASSCF and UB3LYP levels of theory with the aug-cc-pVDZ basis set were used to characterize structures, vibrational frequencies, and energies for stationary points on the ground state triplet and singlet O(2)+C(2)H(4) potential energy surfaces (PESs). Spin-orbit couplings between the PESs were calculated using state averaged CASSCF wave functions. More accurate energies were obtained for the CASSCF structures with the MRMP2/aug-cc-pVDZ method. An important and necessary aspect of the calculations was the need to use different CASSCF active spaces for the different reaction paths on the investigated PESs. The CASSCF calculations focused on O(2)+C(2)H(4) addition to form the C(2)H(4)O(2) biradical on the triplet and singlet surfaces, and isomerization reaction paths ensuing from this biradical. The triplet and singlet C(2)H(4)O(2) biradicals are very similar in structure, primarily differing in their C-C-O-O dihedral angles. The MRMP2 values for the O(2)+C(2)H(4)→C(2)H(4)O(2) barrier to form the biradical are 33.8 and 6.1 kcal/mol, respectively, for the triplet and singlet surfaces. On the singlet surface, C(2)H(4)O(2) isomerizes to dioxetane and ethane-peroxide with MRMP2 barriers of 7.8 and 21.3 kcal/mol. A more exhaustive search of reaction paths was made for the singlet surface using the UB3LYP/aug-cc-pVDZ theory. The triplet and singlet surfaces cross between the structures for the O(2)+C(2)H(4) addition transition states and the biradical intermediates. Trapping in the triplet biradical intermediate, following (3)O(2)+C(2)H(4) addition, is expected to enhance triplet→singlet intersystem crossing.     

Detection of mutant p53 using field-effect transistor biosensor

We assessed the abilities of wild p53 and mutant p53 proteins to interact with the consensus DNA-binding sequence using a MOSFET biosensor. This is the first report in which mutant p53 has been detected on the basis of DNA-protein interaction using a FET-type biosensor. In an effort to evaluate the performance of this protocol, we constructed the core domain of wild p53 and mutant p53 (R248W), which is DNA-binding-defective. After the immobilization of the cognate DNA to the sensing layer, wild p53 and mutant p53 were applied to the DNA-coated gate surface, and subsequently analyzed using a semiconductor analyzer. As a consequence, a significant up-shift in drain current was noted in response to wild p53, but not mutant p53, thereby indicating that sequence-specific DNA-protein interactions could be successfully monitored using a field-effect-based biosensor. These data also corresponded to the results obtained using surface plasmon resonance (SPR) measurements. Taken together, our results show that a FET-type biosensor might be promising for the monitoring of mutant p53 on the basis of its DNA-binding activity, providing us with very valuable insights into the monitoring for diseases, particularly those associated with DNA-protein binding events.     

Highly efficient solvent-free catalytic hydrogenation of solid alkenes and nitro-aromatics using Pd nanoparticles entrapped in aluminum oxy-hydroxide

Solid alkenes and aromatic nitro compounds are readily hydrogenated to the corresponding alkanes without further reduction of other functional group and amino compounds in nearly quantitative yields in the presence of Pd nanoparticles entrapped in aluminum oxy-hydroxide under the solvent-free condition.     

An efficient synthesis of α-methylene-γ-butyrolactones from Baylis-Hillman adducts via an In-mediated Barbier reaction and stereoselective lactonization under MeSO2Cl/Et3N conditions

An efficient synthesis of trans-α-methylene-γ-butyrolactones is disclosed from syn-homoallylic alcohols via the intramolecular mesylate displacement reaction promoted by nearby ester group under the influence of MsCl/Et₃N. syn-Homoallylic alcohols were prepared via the In-mediated Barbier reaction of the bromides of Baylis-Hillman adducts.     

Thermal annealing synthesis of titanium-dioxide nanowire-nanoparticle hetero-structures

Crystalline TiO₂ nanowire-nanoparticle hetero-structures were successfully synthesized from titanium foils by using a simple thermal annealing method with the aid of CuCl₂ at the atmospheric pressure. Nanowires were grown from Ti foils by simply annealing Ti foils at 850 °C. Then, TiCl₄ was delivered to TiO₂ nanowires so as to precipitate TiO₂ nanoparticles on nanowire surfaces. At 750 °C reaction temperature, nanoparticles of tens of nanometers in diameter were well distributed on pre-grown nanowire forests. Nanoparticles were likely to be precipitated by TiCl₄ decomposition or oxidation and that require high temperatures above ∼650 °C. Electron microscopy, X-ray diffraction, and UV-vis spectroscopy analyses show they have the rutile polycrystalline structure with a slightly enlarged bandgap compared to that of bulk TiO₂. The influence of key synthesis parameters including reaction temperature, reaction time, and quantity of supplied materials on the incorporating nanoparticles was also systematically studied. The optimum reaction condition in the present paper was identified to be 750 °C annealing with repetitive 20 min reactions. A higher reaction temperature yielded larger diameter particles, and higher loading of Ti produced dense particles without changing the particle size. Finally, this method could be utilized for synthesizing other metal oxide nanowires-nanoparticle hetero-structures.     

Nicotinamide Prevents Ultraviolet Radiation-induced Cellular Energy Loss

UV radiation is carcinogenic by causing mutations in the skin and also by suppressing cutaneous antitumor immunity. We previously found nicotinamide (vitamin B3) to be highly effective at reducing UV-induced immunosuppression in human volunteers, with microarray studies on in vivo irradiated human skin suggesting that nicotinamide normalizes subsets of apoptosis, immune function and energy metabolism-related genes that are downregulated by UV exposure. Using human adult low calcium temperature keratinocytes, we further investigated nicotinamide’s effects on cellular energy metabolism. We found that nicotinamide prevented UV-induced cellular ATP loss and protected against UV-induced glycolytic blockade. To determine whether nicotinamide alters the effects of UV-induced oxidative stress posttranslationally, we also measured UV-induced reactive oxygen species (ROS). Nicotinamide had no effect on ROS formation, and at the low UV doses used in these studies, equivalent to ambient daily sun exposure, there was no evidence of apoptosis. Hence, nicotinamide appears to exert its UV protective effects on the skin via its role in cellular energy pathways.     

Highly Selective and Low Damage Etching of GaAs/AlGaAs Heterostructure using Cl2/O2 Neutral Beam

Highly selective and low damage etching of the GaAs cap layer on AlGaAs is essential in fabricating GaAs/AlGaAs high electron mobility transistors. The GaAs on AlGaAs was etched using a low energy Cl₂/O₂ neutral beam and the Schottky device characteristics fabricated on the exposed AlGaAs were compared with those fabricated after the etching using wet etching and a Cl₂/O₂ ion beam. Using a low energy Cl₂/O₂ ion beam or a Cl₂/O₂ neutral beam, highly selective etching of the GaAs cap layer to AlGaAs similar to wet etching could be achieved through the formation of Al₂O₃ on the exposed AlGaAs during the etching. When the electrical characteristics of the Schottky devices were compared, the devices fabricated after the etching using the neutral beam showed the best electrical characteristics such as electrical stability, low leakage current, higher barrier height, etc. by showing low damage to the exposed AlGaAs surface.     

Development of Batch and Continuous Processes on Biodiesel Production in a Packed-Bed Reactor by a Mixture of Immobilized Candida rugosa and Rhizopus oryzae Lipases

In this study, transesterification and esterification were investigated in batch and continuous process using immobilized Candida rugosa and Rhizopus oryzae lipases. In the case of batch process, stepwise reaction method was investigated to prevent the lipase deactivation. Reaction conditions were as follows: temperature, 45 °C; agitation speed, 250 rpm; enzyme concentration, 20%; and water contents 10%. And then, conversion yield was 98.33% at 4 h. In the case of continuous process, circulation and long-term continuous system were investigated for development of efficient mass transfer system. Optimal reaction conditions were as follows: temperature, 45 °C; flow rate, 0.8 mL/min; and water contents, 10%. And then, conversion yield of biodiesel was 97.98% at 3 h. Especially, the maximum conversion yield using a mixture of immobilized lipases exceeded over 90% for 108 h in long-term continuous system under optimal reaction conditions (45 °C; flow rate, 0.8 mL/min; and water contents, 10%). These results should help in determining the best method for the biodiesel production and improving the design and operation of large scale by enzymatic systems.