Effects of starch types on the properties of baked starch foams

In order to determine how the physicochemical properties of starch foams depend on the type of the starch used in baking process, starch foams were prepared using native starch and selected starch derivatives. The morphology, the density, the water adsorption capacity, the impact strength, and the thermal properties were determined for foams made from native starch, pregelatinized starch, hydroxypropylated starch with different degrees of substitution (DS = 0.015–0.025 and DS = 0.1), low distarch phosphate, medium distarch phosphate, and two cationic starch types (DS = 0.027–0.029 and DS = 0.029–0.033). The modified starch foams exhibited a more expanded structure with thinner cell walls than the foam made from native starch. The density of the native starch was 0.21 g cm^?3 , while the density of the modified starch foams was lower, in the range of 0.14–0.17 g cm^?3 except for the starch foam made from medium distarch phosphate. The thermal and physicochemical properties of the foams made from the other starch derivatives were dependent on the functional groups and the degree of cross-linking. The foam made from medium distarch phosphate had a significantly higher density and impact strength that was accompanied by a somewhat lower water adsorptivity.     

Functionalization by Cold Plasmas of Polymer Model Surfaces (Hexatriacontane and Octadecyloctadecanoate) Studied by Contact Angle Measurements,XPS, and FTIR Spectroscopy

Abstract

Surface functionalization by argon or oxygen RF plasmas (13.56 MHz) of polymer model compounds, namely hexatriacontane (C₃₆H₇₄) and octadecyloctadecanoate [OOD, CH₃(CH₂)₁₆COO(CH₂)₁₇CH₃, was studied using contact angle measurements, XPS, and FTIR-ATR. In order to gain a better insight into the plasma-surface interaction mechanisms, the effects of the main plasma parameters (treatment time, power, pressure, and flow rate) on functionalization were investigated. It was shown that an argon plasma is more efficient than an oxygen plasma and that the ester-containing model compound incorporated less oxygen than the paraffinic one. After 10 seconds of treatment, contact angle measurements showed that none of these plasma parameters affect in any way the properties of the uppermost surface layer; these depend only on the nature of the sample and on the gas used in the plasma. On the other hand, ESCA, which allows a 70-Å in-depth probing, reveals the influence of the plasma parameters on both types of samples. IR, which probes to a much greater depth, evidences an evolution only for treated OOD samples. Interpretations are proposed for the effect of the plasma parameters on functionalization.     

C-Triazolyl β-d-furanosides as LpxC inhibitors: stereoselective synthesis and biological evaluation

C-Triazolyl β-d-furanosides 10a–f were synthesized in a stereocontrolled way, starting from d-mannose. In the key steps of the synthesis a diastereoselective reduction of hemiketal 14 and a Cu(I) catalyzed [3+2]-cycloaddition of central building block 18 with various azides were performed. The synthesized hydroxamic acids were tested for their inhibitory activity against LpxC, a Zn²⁺-dependent deacetylase playing an important role in the biosynthesis of lipid A and therefore representing an interesting target for the development of novel antibiotics against Gram-negative bacteria. The C-triazolyl glycosides 10a–f did not exhibit antibiotic activity. However, the described synthesis is a versatile way to access C-triazolyl β-d-furanosides bearing all of their substituents at the same side of the tetrahydrofuran ring.     

A cooperative allylic fluorination: combination of nucleophilic and electrophilic fluorine sources

A one step, regioselective allylic fluorination of alkenes is reported in which electrophilic and nucleophilic sources of fluorine act synergistically to afford rearranged allylic fluorides over alternative vicinal dihalides. The reaction occurs under exceptionally mild conditions and without need for prefunctionalization or transition metal catalysts. The fluorination of cyclic alkenes and monoterpenes is highlighted, and preliminary mechanistic experiments reveal that dual (radical and ionic) pathways operate simultaneously.     

Crystal structure,thermal behavior,and microbiological activity of a thiosemicarbazide-type ligand and its cobalt complexes

The synthesis of a potentially bioactive mixed-valence Co^III/Co^II complex with 2-acetylpyridine S-methylisothiosemicarbazone (HL) ligand is described. The crystal and molecular structure of the formed [Co^IIIL₂][Co^IICl₃ py]·Me₂CO (I) compound (py stands for pyridine) is determined by single-crystal X-ray crystallography. It’s thermal decomposition along with the decomposition of the ligand and six structurally related complexes with formulas [CoL₂]NO₃·MeOH (1), [CoL₂]Br·MeOH (2), [CoL₂]HSO₄·MeOH (3), [CoL₂]₂[Co^II(NCS)₄] (4), [Co(HL)(L)]I₂·2MeOH (5), and [Co(HL)(L)][Co^IICl₄]·MeOH (6) was determined by simultaneous TG/DSC measurements. The decomposition pattern is evaluated using TG/DTA-MS data. The results were related to the solvent/moisture content and the decomposition mechanism of the compounds. The antimicrobial activity of the ligand and of all the complexes was tested in vitro for selected gram-negative and gram-positive bacteria and fungi. The activity of the ligand against all tested bacteria is comparable with those obtained for standard antibiotics, while it is less active against fungi. Surprisingly, the activity of the complexes is very low. The low antimicrobial activity of the complexes may be in connection with their high thermodynamic and kinetic inertness in solution. The results are also supported by the relatively high thermal stability of the complexes.     

Interactions of poly(amidoamine) dendrimers with Survanta lung surfactant: the importance of lipid domains

The interaction of generation 5 (G5) and 7 (G7) poly(amidoamine) (PAMAM) dendrimers with mica-supported Survanta bilayers is studied with atomic force microscopy (AFM). In these experiments, Survanta forms distinct gel and fluid domains with differing lipid composition. Nanoscale defects are induced by the PAMAM dendrimers. The positively charged dendrimers remove lipid from the fluid domains at a significantly greater rate than for the gel domains. Dendrimer accumulation on lipid edges and terraces preceding lipid removal has been directly imaged. Immediately following lipid removal, the mica surface is clean, indicating that lipid defects are not induced by dendrimers binding to the mica substrate and displacing the lipid.     

Poly(amidoamine) dendrimers on lipid bilayers I: Free energy and conformation of binding

Third-generation (G3) poly(amidoamine) (PAMAM) dendrimers are simulated approaching 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayers with fully atomistic molecular dynamics, which enables the calculation of a free energy profile along the approach coordinate. Three different dendrimer terminations are examined: protonated primary amine, uncharged acetamide, and deprotonated carboxylic acid. As the dendrimer and lipids become closer, their attractive force increases (up to 240 pN) and the dendrimer becomes deformed as it interacts with the lipids. The total energy release upon binding of a G3-NH3+, G3-Ac, or G3-COO- dendrimer to a DMPC bilayer is, respectively, 36, 26, or 47 kcal/mol or, equivalently, 5.2, 3.2, or 4.7x10(-3) kcal/g. These results are analyzed in terms of the dendrimers' size, shape, and atomic distributions as well as proximity of individual lipid molecules and particular lipid atoms to the dendrimer. For example, an area of 9.6, 8.2, or 7.9 nm2 is covered on the bilayer for the G3-NH3+, G3-Ac, or G3-COO- dendrimers, respectively, while interacting strongly with 18-13 individual lipid molecules.     

Sterically‐Directed Consecutive and Size‐Selective Self‐Assembly of Palladium Diphosphane Complexes with an Ar‐BIAN Ligand: Unexpected Formation of Pentameric and Hexameric Aggregates

The coordination properties of N,N′‐bis[4‐(4‐pyridyl)phenyl]acenaphthenequinonediimine (L¹) and N,N′‐bis[4‐(2‐pyridyl)phenyl]acenaphthenequinonediimine (L²) were investigated in self‐assembly with palladium diphosphane complexes [Pd(P^P)(H₂O)₂](OTf)₂ (OTf=triflate) by using various analytical techniques, including multinuclear (¹H, ¹⁵N, and ³¹P) NMR spectroscopy and mass spectrometry (P^P=dppp, dppf, dppe; dppp=bis(diphenylphosphanyl)propane, dppf= bis(diphenylphosphanyl)ferrocene, and dppe=bis(diphenylphosphanyl)ethane). Beside the expected trimeric and tetrameric species, the interaction of an equimolar mixture of [Pd(dppp)]²⁺ ions and L¹ also generates pentameric aggregates. Due to the E/Z isomerism of L¹, a dimeric product was also observed. In all of these species, which correspond to the general formula [Pd(dppp)L¹]_n(OTf)_2n (n=2–5), the L¹ ligand is coordinated to the Pd center only through the terminal pyridyl groups. Introduction of a second equivalent of the [Pd(dppp)]²⁺ tecton results in coordination to the internal, sterically more encumbered chelating site and induces enhancement of the higher nuclearity components. The presence of higher‐order aggregates (n=5, 6), which were unexpected for the interaction of cis‐protected palladium corners with linear ditopic bridging ligands, has been demonstrated both by mass‐spectrometric and DOSY NMR spectroscopic analysis. The sequential coordination of the [Pd(dppp)]²⁺ ion is attributed to the dissimilar steric properties of the two coordination sites. In the self‐assembled species formed in a 1:1:1 mixture of [Pd(dppp)]²⁺/[Pd(dppe)]²⁺/L¹, the sterically more demanding [Pd(dppp)]²⁺ tectons are attached selectively to the pyridyl groups, whereas the more hindered imino nitrogen atoms coordinate the less bulky dppe complexes, thus resulting in a sterically directed, size‐selective sorting of the metal tectons. The propensity of the new ligands to incorporate hydrogen‐bonded solvent molecules at the chelating site was confirmed by X‐ray diffraction studies.