Reduced Graphene Oxide Non‐covalent Functionalized with Zinc Tetra Phenyl Porphyrin Nanocomposite for Electrochemical Detection of Dopamine in Human Serum and Rat Brain Samples

We described the use of a nanocomposite consisting of reduced graphene oxide and zinc tetraphenylporphyrin (RGO/Zn‐TPP) for electrochemical sensing of dopamine (DA). The surface of RGO was homogeneously functionalized with Zn‐TPP via non‐covalent π‐π interaction. The nanocomposite was characterized by scanning electron microscopy, UV‐Vis spectrometry, nuclear magnetic resonance spectroscopy and electrochemical impedance spectroscopy. The electroanalysis behavior of the nanocomposite was studied by cyclic voltammetry and amperometry. The excellent electrocatalytic activity is found for oxidation of DA, best at working voltage of 0.214 V (vs. Ag/AgCl) and linear response range of 0.04–238.8 μM. The sensitivity and detection limit were of 0.665 μA µM^?1 cm^?2 and 3 nM, respectrively. The electrode is well reproducible, stable, and represents a viable platform for the analysis of DA in DA injection, human serum and rat brain sample.     

Study of Ba3M(II)M(IV)WO9 (M(II) = Ca, Zn; M(IV) = Ti, Zr) perovskite oxides: competition between 3C and 6H perovskite structures

We describe an investigation of Ba3MIIMIVWO9 oxides for MII = Ca, Zn, and other divalent metals and MIV = Ti, Zr. In general, a 1:2-ordered 6H (hexagonal, P63/mmc) perovskite structure is stabilized at high temperatures (1300 degrees C) for all of the Ba3MIITiWO9 oxides investigated. An intermediate phase possessing a partially ordered 1:1 double perovskite (3C) structure with the cation distribution, Ba2(Zn2/3Ti1/3)(W2/3Ti1/3)O6, is obtained at 1200 degrees C for Ba3ZnTiWO9. Sr substitution for Ba in the latter stabilizes the cubic 3C structure instead of the 6H structure. A metastable Ba3CaZrWO9 that adopts the 3C (cubic, Fmm) structure has also been synthesized by a low-temperature metathesis route. Besides yielding several new perovskite oxides that may be useful as dielectric ceramics, the present investigation provides new insights into the complex interplay of crystal chemistry (tolerance factor) and chemical bonding (anion polarization and d0-induced distortion of metal-oxygen octahedra) in the stabilization of 6H versus 3C perovskite structures for the Ba3MIIMIVWO9 series.     

An efficient synthesis of substituted benzene-1,2-dicarboxaldehydes

Substituted-benzene-1,2-dicarbaldehydes were synthesized by the reaction of substituted-1,2-bis(dibromomethyl) benzenes with fuming sulfuric acid,followed by hydrolysis. The yields were signifi-cantly improved by introducing solid sodium bicarbonate into the reaction mixture before hydrolysis and workup.     

Poly(3,4-ethylenedioxythiophene-co-(5-amino-2-naphthalenesulfonic acid)) (PEDOT-PANS) film modified glassy carbon electrode for selective detection of dopamine in the presence of ascorbic acid and uric acid

Poly(3,4-ethylenedioxythiophene-co-(5-amino-2-naphthalenesulfonic acid)) (PEDOT-PANS) film modified glassy carbon electrode was prepared by electrochemical polymerization technique. The properties of modified electrode was studied. It was found that the electrochemical properties of modified electrode was very much dependent on the experimental conditions, such as monomer oxidation potential and pH. The modified electrode surface was characterized by scanning electron microscopy (SEM). The PEDOT-PANS film modified electrode shows electrocatalytic activity toward oxidation of dopamine (DA) in acetate buffer solution (pH 5.0) and results in a marked enhancement of the current response. The linear sweep voltammetric (LSV) peak heights are linear with DA concentration from 2 × 10⁻⁶ to 1 × 10⁻⁵ M. The detection limit is 5 × 10⁻⁷ M. More over, the interferences of ascorbic acid (AA) and uric acid (UA) were effectively diminished. This work provides a simple and easy approach for selective determination of dopamine in the presence of ascorbic acid and uric acid.     

Di- and tri-nuclear molybdenum-palladium complexes bearing strong π-acceptor “P-N-P” ligands, MeN{P(OR)2}2 (R = CH2CF3 or Ph)

The dipalladium complexes, [PdCl(μ-MeN{P(OR)₂}₂)]₂ (R = CH₂CF₃, 1a; Ph, 1b) react with [Mo₂(η⁵-C₅H₅)₂(CO)₆] in boiling benzene to afford the molybdenum-palladium heterometallic complexes, [(η⁵-C₅H₅)(CO)Mo(μ-MeN{P(OR)₂}₂)₂PdCl] (R = CH₂CF₃, 3a; Ph, 3b), [(η⁵-C₅H₅)Mo(μ₃-CO)₂(μ-MeN{P(OR)₂}₂)₂Pd₂Cl], (R = CH₂CF₃, 5a; Ph, 5b), [(η⁵-C₅H₅)(Cl)Mo(μ₂-CO)(μ₂-Cl)(μ-MeN{P(OR)₂}₂)PdCl], (R = CH₂CF₃, 6a; Ph, 6b) and also the mononuclear complex [Mo(CO)Cl(η⁵-C₅H₅)(κ²-MeN{P(OR)₂}₂)], (R = Ph, 4b). These complexes have been separated by column chromatography and are characterised by elemental analysis, IR, ¹H, ³¹P{¹H} NMR data. The structures of 1a, 3a, 4b, 5b and 6a have been confirmed by single crystal X-ray diffraction. The CO ligands in 5b and 6a adopt a semi-bridging mode of bonding; the Mo-CO distances (1.95-1.97 Å) are shorter than the Pd-CO distances (2.40-2.48 Å). The Pd-Mo distances fall in the range, 2.63-2.86 Å. The reaction of [Mo₂(η⁵-C₅H₅)₂(CO)₆] with MeN{P(OPh)₂}₂ in toluene gives [Mo₂(CO)₄(η⁵-C₅H₅)₂(κ¹-MeN{P(OPh)₂}₂)₂] (2) in which the diphosphazane acts as a monodentate ligand.     

Miscible and Immiscible Foam Injection for Mobility Control and EOR in Fractured Oil-Wet Carbonate Rocks

Foam injection is a proven enhanced oil recovery (EOR) technique for heterogeneous reservoirs, but is less studied for EOR in fractured systems. We experimentally investigated tertiary \(\text {CO}_{2}\) injections, and \(\text {N}_{2}\) - and \(\text {CO}_{2}\) -foam injections for enhanced oil recovery in fractured, oil-wet limestone core plugs. Miscible \(\text {CO}_{2}\) and \(\text {CO}_{2}\) -foam was compared with immiscible \(\text {CO}_{2}\) - and \(\text {N}_{2}\) -foam as tertiary recovery techniques, subsequent to waterfloods, in fractured rocks with different wettability preferences. At water-wet conditions waterfloods produced approximately 40 % OOIP, by spontaneous imbibition. Waterflood oil recovery at oil-wet conditions was below 20 % OOIP, due to suppressed imbibition where water predominantly flowed through the fractures, unable to mobilize the oil trapped in the matrix. Tertiary, supercritical \(\text {CO}_{2}\) -mobilized oil trapped in the matrix, particularly at weakly oil-wet conditions, by diffusion. Recovery by diffusion was high due to small core samples, high initial oil saturation and a continuous oil phase at oil-wet conditions. Both immiscible \(\text {CO}_{2}\) - and \(\text {N}_{2}\) -foams and miscible, supercritical \(\text {CO}_{2}\) -foam demonstrated high ultimate oil recoveries, but immiscible foam was less efficient (30 pore volumes injected) compared to miscible foam (2 pore volumes injected) to reach ultimate recovery. This is explained by the capillary threshold pressure preventing the injected \(\text {N}_{2}\) gas from entering the matrix, verified by computed X-ray tomography, and the mobilized oil was displaced by the aqueous surfactant in the foam. At miscible conditions, there exists no capillary entry pressure between the oil-saturated matrix and the injected \(\text {CO}_{2}\) , allowing foam to invade the matrix for efficient oil recovery.     

Crystal structures of 3/4-pyridyl-based thiosemicarbazones and related Cu and Ni coordination compounds

In this investigation, the crystal structures of the thio-ligands 3-formylpyridine 4-phenylthiosemicarbazone (C₁₃H₁₂N₄S, 1 ) and 4-benzoylpyridine 4-ethylthiosemicarbazone (C₁₅H₁₆N₄S, 2 ), and of two new coordination compounds, chlorido(3-formylpyridine 4-phenylthiosemicarbazone-κS)bis(triphenylphosphane-κP)copper(I) acetonitrile monosolvate, [CuCl(C₁₃H₁₂N₄S)(C₁₈H₁₅P)₂]·CH₃CN, 3 , and bis(3-formylpyridine 4-ethylthiosemicarbazonato-κ²N¹,S)nickel(II), [Ni(C₉H₁₁N₄S)₂], 4 , are reported. In complex 3 , the thio-ligand coordinates in a neutral form to the Cu atom through its S-donor atom, and in complex 4 , the anionic thio-ligand chelates to the Ni atom through N- and S-donor atoms. The geometry of complex 3 is distorted tetrahedral [bond angles 99.70 (5)–123.23 (5)°], with the P—Cu—P bond angle being the largest, while that of complex 4 is square planar, with trans-S—Ni—S and N—Ni—N bond angles of 180°.     

Designing highly specific biosensing surfaces using aptamer monolayers on gold

To build highly specific surfaces using aptamer affinity reagents, the effects of linker and coadsorbents were investigated for maximizing target binding and specificity for aptamer-based self-assembled monolayers (SAMs) supported on gold. An aptamer that binds the protein thrombin was utilized as a model system to compare different mixed monolayer systems toward maximizing binding and selectivity to the immobilized aptamer. Important factors used to optimize binding characteristics of thrombin to the aptamer-based monolayer films include changes in design elements of the linker and different coadsorbent thiols. Binding events measured by surface plasmon resonance (SPR) and ellipsometry showed that the binding performance of the aptamer SAMs depends principally on the linker and to a lesser extent on the coadsorbent. SAMs formed with HS-(CH2)6-OP(O)2O-(CH2CH2O)6-TTTTT-aptamer exhibited a 4-fold increase in binding capacity versus SAMs made using HS-(CH2)6-TTTTT-aptamer. Furthermore, SAMs made using HS-(CH2)6-OP(O)2O-(CH2CH2O)6-TTTTT-aptamer showed nearly complete specificity for thrombin versus bovine serum albumin (BSA, less than 2% bound), while a SAM incorporating a random DNA fragment (HS-(CH2)6-OP(O)2O-(CH2CH2O)6-TTTTT-RANDOM) showed little binding of thrombin. Irrespective of the aptamer-linker system, use of HS-(CH2)11(OCH2CH2)3OH, referred to as EG(3), as a coadsorbent enhanced binding of thrombin by approximately 2.5-fold compared to that of HS-(CH2)6-OH (mercaptohexanol, MCH).