Bis induces growth inhibition and differentiation of HL-60 cells via up-regulation of p27

Bis (Bag-3, CAIR), a Bcl-2-interacting protein, promotes the anti-apoptotic activity of Bcl-2 and increased levels of Bis have been observed in several disease models. The involvement of Bcl-2 and some Bcl-2-binding proteins in differentiation has recently been reported. However, the relevance of Bis to cellular differentiation remains unknown. The findings herein show that Bis expression is up-regulated during the differentiation of HL-60 cells. To investigate the effect of Bis expression on differentiation, we established Bis-overexpressing HL-60 cells (HL-60-bis). HL-60-bis cells have a low nuclear: cytoplasmic ratio and indented nucleus in Wright- Giemsa staining, and an increased expression of CD11b in immunofluorescence study, indicating the promotion of differentiation. The overexpression of Bis also resulted in a retarded cell growth rate, accompanied by the accumulation of HL-60 cells at the G0/G1 phase of the cell cycle, which was sustained during the differentiation process. Western blot analysis revealed that the expression of p27, a representative inducer of cell cycle arrest at the G1 phase, was increased 2.5-fold in HL-60-bis cells compared to HL-60-neo cells. These results suggest that the Bis induced growth inhibition of HL-60 cells promotes G0/G1 phase arrest via up-regulation of p27, which seems to be a prerequisite for differentiation. Further studies will be required to define the exact roles of Bis on cellular differentiation more precisely.     

The predictive accuracy for estimating infinite dilution activity coefficients by γ∞-based UNIFAC

The predictive accuracy for estimating infinite dilution activity coefficients by a modification of the UNIFAC method wherein the group interaction parameters were based on only data (referred to as -based UNIFAC) has been studied. Estimates and measured values were compared for six prototypical solutes in a series of homologous n-alkanes, l-alcohols and alkanenitrile solvents. Despite the fact that the interaction parameters were derived using only data, this approach still gave serious errors due to several inherent problems in the original UNIFAC model. Its performance is sometimes even poorer than that of the original UNIFAC method. For example for nitromethane in alcohols and p-dioxane in nitriles values predicted by the -based UNIFAC are essentially zero. The large errors for these systems are most likely due to inaccurate interaction parameters in the -based UNIFAC method.     

Quantitative analyses of shape-selective intercalation of isomeric mixtures of muconates into [LiAl2(OH)6]Cl.yH2O layered double hydroxide

Quantitative investigation of the shape selectivity for the competitive intercalation reaction of isomeric mixtures in the interlayer of LDH was achieved by analyzing the solid phases synthesized by the reaction of [LiAl(2)(OH)(6)]Cl.yH(2)O with various compositional mixtures of (E,E)- and (Z,Z)-muconates. The apparent partition constant K' for the anion-exchange reaction between (E,E)- and (Z,Z)-muconates was quite dependent on the mole fraction of muconates in solution. The only single phase saturated with [LiAl(2)(OH)(6)](2)[(E,E)-C(6)H(4)O(4)].zH(2)O could be obtained in the range of the initial mole fraction of (E,E)-muconate larger than 0.6 in the starting solution, while mixed phases intercalated with (E,E)- and (Z,Z)-muconates could be obtained at lower mole fractions of (E,E)-muconate. The shape selectivity for the competitive reaction of two muconates on the [LiAl(2)(OH)(6)](+) lattice could be ascribed to thermodynamic processes, and the conditions under which that pure (E,E)-muconate was efficiently separated from isomeric mixtures of two muconates were successfully evaluated.     

Cytotoxic Constituents from the Stem Bark of Zanthoxylum Pistaciiflorum

Two new esters, methyl 4‐(prenyloxy)dihydrocinnamate and methyl 4‐(geranyloxy)dihydrocinnamate, together with fourteen known compounds have been isolated from the stem bark of Zanthoxylum pistaciiflorum. The structures of two new compounds were determined through spectral analyses. Among the isolates, four compounds exhibited effective cytotoxicities against P‐388 and HT‐29 cell lines in vitro.     

Hydroxy and methoxy substituted N 1,N 4-diarylidene-S-methylthiosemicarbazone iron(III) and nickel(II) complexes

Template reactions of 2,4-dihydroxy-, 2,5-dihydroxy-, 2-hydroxy-3-methoxy- and 2-hydroxy-4-methoxy-benzaldehyde with methoxy- and hydroxy-substituted salicylaldehyde S-methylthiosemicarbazones in the presence of NiCl₂ and FeCl₃ resulted in the corresponding hydroxy- and methoxy-substituted N¹,N⁴-diarylidene-S-methylthiosemi-carbazone complexes. Characterization of the compounds, [Fe(L)Cl] and [Ni(L)], was accomplished by means of elemental analysis, conductivity and magnetic measurements, i.r. and ¹H-n.m.r. spectra. A systematic trend has been observed for the chemical shift values of the aromatic protons in the spectra of complexes.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

Modeling of the Permeate Flux during Microfiltration of BSA-Adsorbed Microspheres in a Stirred Cell

A study on the variation of the permeate flux was performed in a stirred cell charged with microspheres, to investigate the effects of the stirrer speeds (300, 400, and 600 rpm) and the BSA concentration (0.1, 0.2, 0.4, and 0.8 g/L) under constant pressure. The permeate flux increased over time before the saturation point, but it began to decrease after that point. An increase of the BSA concentration and the stirrer speed resulted in the rapid increase of the permeate flux. This is contrary to the observation of the conventional filtration experiments using a stirred cell. A resistance-in-series model was employed for the modeling of the permeate flux. The cake resistance (R(c), induced by the concentration polarization of microspheres) and the fouling resistance (R(f), induced by the adsorption of BSA inside the membrane pore) must be considered simultaneously for the modeling. These modeling results were in good agreement with the experimental data. These can be applied to the special system considering both R(c) and R(f) as well as the general filtration systems using a stirred cell. Copyright 2000 Academic Press.     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

Spectrophotometric determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol complex onto microcrystalline naphthalene

A selective Spectrophotometric method has been developed for the trace determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol (PTPT) complex onto microcrystalline naphthalene. The complex is quantitatively adsorbed on naphthalene in the pH range 7.5–11.5, separated by filtration, dissolved in dimethylformamide (DMF) and determined spectrophotometrically at 400 nm. Beer's law is obeyed in the concentration range 2.5–37.5 g of copper in 10 ml of DMF. The molar absorptivity and Sandell's sensitivity are 1.30 × 10⁴1 · mol^–1 · cm^–1 and 0.0048g cm^–2, respectively. Ten replicate analyses of a solution containing 20.0 g of copper gave a mean absorbance of 0.410 with a relative standard deviation of 0.91 %. The interferences of various ions have been studied and the method has been validated by the determination of copper in various standard reference materials, beers, wines, human hair, goat liver and environmental samples.On leave from St. Stephen's College, Delhi 110 007, India     

The effect of mechanical activation on the thermal decomposition of chalcopyrite

Experimental results on the influence of preliminary mechanical activation on the thermal decomposition of chalcopyrite are presented and discussed. The following experimental facts were found: