Influence of interface roughness on reflectivity of tungsten/boron-carbide multilayers with variable hi-layer number by X-ray reflection and diffuse scattering

from layer to layer during multilayer growing. The variation of the reflectivity and interface roughness with bi-layer number is accurately explained by the presented real-structure model.     

The static and hyper-frequency magnetic properties of a ferromagnetic-ferroelectric composite

This paper reports the static and hyper-frequency magnetic properties, as well as their relationship with microstructure, of the ferromagnetic-ferroelectric co-fired composite ceramic, (1−x)Ba₂Zn_1.2Cu_0.8Fe₁₂O₂₂-xPb(Ni_1/3Nb_2/3)_0.8Ti_0.2O₃. The X-ray diffraction results did not detect any other phase in the co-fired ceramics, but found a crystal structural distortion of ferrite phase. Scanning electron microscopy photos showed that two phases’ grains matched well and stacked compactly and the hexagonal ferrite changed its grain morphology. The saturation magnetization increased with the reduction of magnetic phase in the range of 0<x<0.65 because of the stress-induced structural distortion. The permeability decreases monotonically with the reduction of magnetic phase in the whole composition range.     

Talbot effect under illumination of double femtosecond laser pulses

The Talbot effect under illumination of double femtosecond laser pulses has been reported. Spectrums of double femtosecond laser pulses with phase differences are quite different from that of one single femtosecond laser pulse. Therefore, the Talbot images of the double femtosecond laser pulses with phase differences are different from that of one single femtosecond laser pulse. Specifically, for the phase difference corresponding to π, the Talbot image shows the largest difference from that of one single pulse. Experimental results are in good agreement with the theoretical analysis. The behaviors of Talbot images under double femtosecond laser pulses illumination cannot be obtained under one femtosecond laser pulse, monochromatic or polychromatic light illumination. Therefore, it is a new interesting optical phenomenon for the Talbot effect which should have potential applications.     

Fibrinogen adsorption onto 316L stainless steel, Nitinol and titanium

Fibrinogen adsorption onto mechanically polished biomedical grade 316L stainless steel (316LSS), nickel titanium alloy (Nitinol) and commercially pure titanium (CpTi) surfaces were studied by measurements of adsorption isotherms and adsorption kinetics using an ex-situ wavelength dispersive spectroscopy technique (WDS). Surface composition, roughness and wettability of these materials were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and water contact angle (WCA) measurements. Adsorption isotherm results showed that surface protein concentration on these materials increased with increasing concentration of fibrinogen in phosphate buffer solution. The fibrinogen adsorption isotherms were modeled by both the monolayer Langmuir isotherm and the multilayer Brunauer-Emmett-Teller (BET) isotherm. The results strongly suggest that fibrinogen forms multilayer structures on these materials when the concentration in solution is high. Complementary measurements on the absorbed fibrinogen films by spectroscopic ellipsometry (SE) support this view.     

多孔硅拉曼光谱随激发功率变化的研究

用阳极氧化法新制备了多孔硅样品,以457．5nm固体激光器为激发光源,在不同激发功率下,获得了拉曼谱图和一些谱峰参量随激光功率的变化关系。解释了520cm^-1和300cm^-1附近拉曼峰随功率变化的一系列可逆的实验现象：随激光功率升高出现的红移和非对称性展宽,主要是由于样品局域平均粒径变小而受量子限域效应的影响导致的;样品局域平均粒径在表面上的二维减小与随激光功率升高而导致的局域温升并不违背基本的热力学定律;高功率时520cm^-1附近双峰的出现是由于多孔硅样品局域平均粒径达到一定阈值而导致的纵模和横模双声子模的分裂。     

探针尖带金属微粒的光子扫描隧道显微镜成像数值模拟

引入了色散介质的时域有限差分法散射场方程,并针对光子扫描隧道显微镜的带金属尖光纤扫描成像问题进行三维的数值模拟。在考虑了光纤和样品相互作用的情况下,采用等效入射波法设置入射波,探针扫描模式为等高扫描模式,从成像分辨力和灵敏度的角度,比较了不同入射角、不同的光纤一样品间距,不同金属类型,及不同金属尖大小的成像情况。数值模拟结果显示,带金属颗粒光纤探针尖的光子扫描隧道显微镜在成像分辨力和灵敏度上有显著的改进,而带不同类型金属颗粒情况下对分辨力影响不大,灵敏度是银最好。     

焙烧温度对铁基催化剂催化浆态床F-T合成反应性能的影响

 采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球形Fe-Cu-K-SiO2催化剂,并考察了焙烧温度对催化剂的结构和织构性质的影响. 结果表明,催化剂具有较好的织构和结构热稳定性,粘结剂SiO2起到了分散和稳定α-Fe2O3晶相的作用. 随着焙烧温度的升高,催化剂的比表面积逐渐减小,α-Fe2O3晶粒逐渐增大,催化剂体相中的Cu和K原子向表面富集,且Cu向表面的迁移更明显; 同时,催化剂中的α-Fe2O3和CuO相发生了一定程度的离析,Cu的助剂作用减弱,使催化剂在合成气气氛下难于还原碳化. 催化剂在n(H2)/n(CO)=0.67,GHSV=2.0 L/(g·h),p=1.5 MPa和θ=250 ℃下的浆态床F-T合成反应评价结果表明,升高焙烧温度,催化剂的初活性和最高活性下降,但运行稳定性提高,而且有效地抑制了CH4的生成,明显促进了烃产物向高碳数方向移动. 反应600 h后卸载下的催化剂的形貌观测表明,催化剂的磨损主要是由化学磨损引起的,提高焙烧温度可明显改善其抗磨损性能,焙烧温度高于400 ℃时,催化剂具有较好的抗磨损性能.     

基于硫堇衍生化自组装膜的丙肝电化学免疫传感器

报道了一种制备电流型免疫传感器的新方法。在金电极表面形成巯基自组装单分子层膜,活化后以共价方式竞争键合硫堇分子和丙肝辣根过氧化酶酶标抗体,制得基于硫堇衍生化自组装膜的丙肝电化学免疫传感器。采用循环伏安法和线性扫描伏安法考察了传感器的组装过程,响应电流的性质,以及传感器对丙肝病毒的响应特性,采用线性扫描伏安法对丙肝抗原进行定量分析,线性范围为3．2—16mg／L;检出限为1．2mg／L;线性相关系数r为0．995。取临床血清进行检测,将结果与临床常用的ELISA法比较,探索了该传感器应用于临床检验的可行性。     

激光打靶数字延时信号完整性的研究

针对高速数字电路设计中遇到的信号完整性问题,本文给出了激光打靶装置中高速数字电路延时分配原理.根据传输线理论,提出端接迹线最大匹配长度值限定法,结合PCB设计,可避免端接失配反射.由电学理论,建模串扰的产生及消除串扰的端接方式.通过对噪声电流I和瞬态负载电流IL复合干扰分析,采取了相应的抑制方法.打靶实验表明,对保证延时信号的完整性是有效的.