Nano-electrospray ionization mass spectrometry: addressing analytical problems beyond routine

The advent of nano-electrospray ionization (nano-ESI) has considerably extended the usability of ESI in the analytical mass spectrometric laboratory. One of the remarkable features of nano-ESI is its extremely low sample consumption. Only a few microliters of analyte solution (10(-5)-10(-8) M) are sufficient for molecular weight determination and structural investigations by MS/MS. But nano-ESI is more than just a minimized-flow ESI; the low solvent flow rate also affects the mechanism of ion formation. As a consequence, the area of ESI-MS applications is significantly enhanced. Oligosaccharides, glycosides as well as glycoproteins can be analyzed more easily than with normal ion spray. The same holds for the analysis of non-covalent complexes sprayed directly from aqueous solutions.     

Cyano‐Bridged MnIII?MIII Single‐Chain Magnets with MIII=CoIII,FeIII, MnIII,and CrIII

A series of isostructural cyano‐bridged Mn^III(h.s.)–M^III(l.s.) alternating chains, [Mn^III(5‐TMAMsalen)M^III(CN)₆] ? 4H₂O (5‐TMAMsalen^2?=N,N′‐ethylenebis(5‐trimethylammoniomethylsalicylideneiminate), Mn^III(h.s.)=high‐spin Mn^III, M^III(l.s.)=low‐spin Co^III, Mn? Co ; Fe^III, Mn? Fe ; Mn^III, Mn? Mn ; Cr^III, Mn? Cr ) was synthesized by assembling [Mn^III(5‐TMAMsalen)]³⁺ and [M^III(CN)₆]^3?. The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [‐Mn^III‐NC‐M^III‐CN‐] repeating motif, for which the ‐NC‐M^III‐CN‐ motif is provided by the [M^III(CN)₆]^3? moiety adopting a trans bridging mode between [Mn^III(5‐TMAMsalen)]³⁺ cations. The Mn^III and M^III ions occupy special crystallographic positions: a C₂ axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn–Teller axis of the Mn^III(h.s.) ion is perpendicular to the N₂O₂ plane formed by the 5‐TMAMsalen tetradentate ligand. These Jahn–Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn‐N_axis‐C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter‐chain M???M distance being relatively large at 9 Å due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5‐TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn? Fe and Mn? Mn display intra‐chain ferromagnetic interactions, whereas Mn? Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single‐chain magnet (SCM) behavior of these three systems, whereas Mn? Co is merely paramagnetic with S_Mn=2 and D/k_B=?5.3 K (D being a zero‐field splitting parameter). At low temperatures, the Mn? M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite‐chain and finite‐chain regimes for the SCM behavior. These isostructural hetero‐spin SCMs offer a unique series of alternating [‐Mn‐NC‐M‐CN‐] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

Experimental and Computational Study of the Thermal Decomposition of 3‐Methyl‐3‐buten‐1‐ol in m‐Xylene Solution

An experimental study of the thermal decomposition of a β‐hydroxy alkene, 3‐methyl‐3‐buten‐1‐ol, in m‐xylene solution, has been carried out at five different temperatures in the range of 513.15–563.15 K. The temperature dependence of the rate constants for the decomposition of this compound in the corresponding Arrhenius equation is given by ln k (s^?1) = (25.65 ± 1.52) ? (17,944 ± 814) (kJ·mol^?1)·T^?1. A computational study has been carried out at the M05–2X/6–31+G(d,p) level of theory to calculate the rate constants and the activation parameters by the classical transition state theory. There is a good agreement between the experimental and calculated rate constants and activation Gibbs energies. The bonding characteristics of reactant, transition state, and products have been investigated by the natural bond orbital analysis, which provides the natural atomic charges and the Wiberg bond indices. Based on the results obtained, the mechanism proposed is a one‐step process proceeding through a six‐membered cyclic transition state, being a concerted and slightly asynchronous process. The results have been compared with those obtained previously by us (Struct Chem 2013, 24, 1811–1816) for the thermal decomposition of 3‐buten‐1‐ol, in m‐xylene solution. We can conclude that in the compound studied in this work, 3‐methyl‐3‐buten‐1‐ol, the effect of substitution at position 3 by a weakly activating CH₃ group is the stabilization of the transition state formed in the reaction and therefore a small increase in the rate of thermal decomposition.     

One‐Step Synthesis of a [20]Silafullerane with an Endohedral Chloride Ion

Silicon analogues of the most prominent carbon nanostructures, namely, hollow spheroidals such as C₆₀ and the fullerene family, have been unknown to date. Herein we show that discrete Si₂₀ dodecahedra, stabilized by an endohedral guest and valence saturation, are accessible in preparative yields through a chloride‐induced disproportionation reaction of hexachlorodisilane in the presence of tri(n‐butyl)amine. X‐ray crystallography revealed that each silicon dodecahedron contains an endohedral chloride ion that imparts a net negative charge. Eight chloro substituents and twelve trichlorosilyl groups are attached to the surface of each cluster in a strictly regioregular arrangement, a thermodynamically preferred substitution pattern according to quantum‐chemical assessment. Our results demonstrate that the wet‐chemical self‐assembly of a complex, monodisperse Si nanostructure is possible under mild conditions starting from simple Si₂ building blocks.     

Dielectric,viscosity, and pitch measurements of a ferroelectric liquid crystal exhibiting the phase sequence smectic M–smectic C

Abstract

A chiral liquid crystal compound exhibiting the ferroelectric smectic C phase and the recently discovered ferroelectric smectic M phase has been studied by measurements of the Goldstone-mode relaxation frequency and dielectric strength, the spontaneous polarization, the tilt angle and the helical pitch. The data allow the determination of the Goldstone-mode rotational viscosity and the pitch controlling elastic constant. The results indicate that the smectic M phase is characterized by a larger molecular order within the smectic layers compared to the smectic C phase confirming the assumption of a tilted hexatic structure for the smectic M phase.     

Interaction of acetic acid with solid water

The interaction of acetic acid (AA, CH(3)COOH), with solid water, deposited on metals, tungsten and gold, at 80 K, was investigated. We have prepared acid/water interfaces at 80 K, namely, acid layers on thin films of solid water and H(2)O adlayers on thin acid films; they were annealed between 80 and 200 K. Metastable impact electron spectroscopy (MIES) and ultraviolet photoelectron spectroscopy UPS(HeII) were utilized to obtain information on the electronic structure of the outermost surface from the study of the electron emission from the weakest bound MOs of the acids, and of the molecular water. Temperature-programmed desorption (TPD) provided information on the desorption kinetics, and Fourier-transformed infrared spectroscopy (FTIR) provided information on the identification of the adsorbed species as well as on the water and acid crystallization. The results are compatible with the finding of ref 1 (preceding paper), made on the basis of DFT calculations, that AA adsorbs on ice as cyclic dimers. Above 120 K, a rearrangement of the AA dimers is suggested by a sharpening of the spectral features in the IR spectra and by spectral changes in MIES and UPS; this is attributed to the glass transition in AA around 130 K. Above 150 K the spectra transform into those characteristic for polycrystalline polymer chains. This structure is stable up to about 180 K; desorption of water takes place from underneath the AA film, and practically all water has desorbed through the AA film before AA desorption starts. There is no indication of water-induced deprotonation of the acid molecules. For the interaction of H(2)O molecules adsorbed on amorphous AA films, the comparison of MIES with the DFT results of ref 1 shows that the initial phase of exposure does not lead to the formation of a top-adsorbed closed water film at 80 K. Rather, the H(2)O molecules become attached to or incorporated into the preexisting AA network by H bonding; no water network is formed in the initial stage of the water adsorption. Also under these conditions no deprotonation of the acid can be detected.     

高聚合度Ⅱ-型聚磷酸铵的合成

用聚合反应-热处理两段工艺合成了高聚合度的聚磷酸铵（APP）阻燃材料,其结构经XRD,粒度及平均聚合度表征。优化反应条件为：磷酸氢二铵1mol,n（磷酸氢二铵）：n（五氧化二磷）：n（脲）：1．0：1．0：0．3．干燥氨气氛下于290℃反应30min,再经250℃-280℃后处理100min-110min。APP的平均聚合度大于150,粒度小于50μm。     

Identification of fentanyl, alfentanil, sufentanil, remifentanil and their major metabolites in human urine by liquid chromatography/tandem mass spectrometry for doping control purposes

Since January 2005, the list of prohibited substances established by the World Anti-Doping Agency prohibits the opioid agent fentanyl as well as its related drugs in professional and amateur sports. Fast, reliable and robust analytical assays are required that allow the sensitive determination of these compounds or respective metabolites in human urine, and liquid chromatography interfaced to mass spectrometry has proven to be a suitable and powerful tool for drug testing for several years. A screening and confirmation method was developed that enables the identification of fentanyl, alfentanil, remifentanil and sufentanil as well as their N-dealkylated or de-esterified metabolites utilizing solid-phase extraction of a 2 mL urine aliquot followed by LC-electrospray-MS/MS analysis. The procedure was validated in terms of recovery (95.8-104.9%), lower limit of detection (0.5 ng mL-1), specificity and interday precision (3.9-19.8%) for the four opioid drugs and the metabolic product norfentanyl. In addition, the mass spectrometric behavior of fentanyl after electrospray ionization and collision-induced dissociation was studied by synthesis and analysis of structurally related compounds, and dissociation pathways were proposed allowing the characterization of target analytes and corresponding metabolites.