Installation of carbon chain onto 2-cyclohexene-1,4-diol monoacetate

Alkylation of cyclohexenyl monoacetate 1 with R₂Cu(CN)(MgCl)₂ or RMgBr/CuCN (cat.) in Et₂O produced trans 1,2-isomers 4, while arylation and alkenylation of 1 was accomplished with lithium borates 5 and a nickel cat. to afford trans 1,4-isomers 3 selectively. Furthermore, several transformations of the products were carried out to demonstrate synthetic advantages of the present reactions.     

Commercially available 5'-DMT phosphoramidites as reagents for the synthesis of vinylphosphonate-linked oligonucleic acids

[reaction: see text]. Commercially available cyanoethyl phosphoramidites derived from T, d(C), d(A), and d(G) were hydrolyzed (1H-tetrazole, MeCN/H2O) to give the corresponding H-phosphonates in excellent yields. Palladium(0)-catalyzed cross-coupling of each of these with the thymidine-derived vinylbromide 2 afforded the corresponding vinylphosphonate-linked dimers TT, d(C)T, d(A)T, and d(G)T in modest to good yields. The TT dimer was further elaborated to give a 5'-DMT-TT-3'-CEP building block, and this was used in the automated synthesis of the TpTTpT tetramer.     

Ion pairing, H-bonding, and π–π interactions in copper(II) complex-organo-networks derived from a proton-transfer compound of the 1,10-phenanthroline-2,9-dicarboxylic acid

The one-pot reaction between the novel proton transfer compound (pydaH₂)²⁺(phendc)²⁻, LH₂, and Cu(II) afforded the compounds (pydaH)₂[Cu(phendc)₂]·10H₂O, 1, and (pydaH)₂[Cu(phendc)(phendcH)]₂·5H₂O, 2, where pyda=2,6-diaminopyridine, and phendcH₂=1,10-phenanthroline-2,9-dicarboxylic acid. The single crystal X-ray diffraction analysis of 1 and 2 revealed that these are two novel self-assembled 3D Cu(II) complex-organo-networks, in which (pydaH)⁺ ions and [Cu(phendc)₂]²⁻ or complex units are held together by ion pairing, H-bonding, and π–π interactions. Magnetic measurements over the temperature range 1.8–310 K revealed no significant magnetic coupling between Cu(II) centers in 1 or 2.     

Ketoconazol‐Triiodide Ion Pair Complex as a Suitable Carrier in an Iodide Selective Membrane Electrode

A novel membrane sensor for selective monitoring of iodide, consisting of a triiodide‐ketoconazole ion pair complex dispersed in a PVC matrix, plasticized with a mixture of 2‐nitrophenyl octyl ether and dioctylphtalate with unique selectivity toward iodide ions, is described. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The optimized membrane demonstrates a near‐Nernstian response for iodide ions over a wide linear range from 1.0 × 10^?2 to 1.0 × 10^?5 M, at 25 ± 1 °C. The electrode could be used over a wide pH range 3–10 and has the advantages of high selectivity, fast response time and good lifetime (over 4 months). It was successfully used as indicator electrode in potentiometric titrations and direct potentiometric assay of iodide ions.     

Nanostructured pure gamma-Fe2O3 via forced precipitation in an organic solvent

Pure maghemite, gamma-Fe(2)O(3), was prepared as ultra fine particles in the nanometer-sized range via the forced precipitation method in an organic solvent. The precipitation of iron(III) ions, from iron(III) chloride in 2-propanol led selectively to highly dispersed particles of ferrihydrite, which upon treatment with temperatures higher than 200 degrees C under dynamic vacuum resulted in high-surface-area particles of gamma-Fe(2)O(3). Precipitation in water also led to ferrihydrite, but the final product, after heating at 300 degrees C, contained a mixture of gamma-Fe(2)O(3) and alpha-Fe(2)O(3) (hematite). The precipitation from iron(III) nitrate in water resulted in goethite which was converted to hematite upon heating. On the other hand, the final product in 2-propanol was a mixture of maghemite and hematite. The products were characterized by FTIR, TGA, XRD, and gas sorption analysis. Nitrogen gas adsorption studies for the pure gamma-Fe(2)O(3) samples revealed mesoporous particles with high surface areas in the range of 70-120 m(2) g(-1) after heat treatment at 300 degrees C. The gamma-Fe(2)O(3) particles retained their gamma-phase as well as their mesoporous structure at relatively high temperatures, as high as 400 degrees C.     

Metallocene–methylaluminoxane catalyst for olefin polymerization. II. Bis-η5-(neomenthyl cyclopentadienyl)zirconium dichloride

Bis(neomenthyl cyclopentadienyl)zirconium dichloride/methyl aluminoxane (η⁵-(NMCp)₂ZrCl₂/MAO) catalyst has been investigated for ethylene polymerization. About 51% of the Zr forms active sites more or less instantaneously according to quenching with tritiated methanol. There is an initial drop of rate of polymerization, R_p, of about 30% which remains constant thereafter. The catalytic activity increases monotonically with temperature; it is proportional to [MAO]^1.75 at a constant [Zr] = 1.5 μM and proportional to [Zr]^?1.2 at a constant [MAO] = 64.5 mM. At very large [MAO]/[Zr], the catalyst has extremely high activity; κ_p = 5 × 10³ (Ms)^?1 at 50°C. There is also facile chain transfer to aluminum, κ = 0.14 s^?1 at 50°C. Both κ_p and κ are about 30 times greater than the corresponding rate constants for MgCl₂ supported TiCl₃ catalysts. The TiCl₃/MgCl₂ and (NMCp)₂/MAO catalysts have nearly the same activation energy for propagation (ca. 7 kcal/mol^?1). The higher activity of the latter is due to its larger preexponential factor in κ_p. The dependence of catalytic activity on the [MAO]/[Zr] ratio may be explained by rapid association-dissociation equilibria of MAO involving acid-base and/or electron deficient bridge complexation.     

Corrected Debye-Hückel analysis of surface complexation; III. Spherical particle charging including ion condensation

Statistical mechanics has been used to derive a model for the charging of a spherical particle in a salt solution to complement our experimental studies and gain a deeper understanding of the processes involved in surface complexation. Our chosen model goes beyond the equilibrium constants and the Gouy-Chapmann theory currently used in surface complexation models. The proton adsorption is taken to occur at a harmonic potential well on the surface characterized by a frequency v and a well depth u(0). Outside the particle surface there is a capacitor layer of width w(c) which is impenetrable to the salt ions. The diffuse screening of the charged particle is described by a corrected Debye-Hückel analysis accounting for ion size in the ion-ion interactions. To account also for nonlinear electrostatic response a layer of condensed counterions has been introduced. The criterion for the onset of ion condensation is that the electrostatic field exceeds a linear response criterion. Ion size effects are accounted for in terms of hole-corrected electrostatic energies and excluded volume. The model has been applied to titrated surface charge data on goethite (alpha-FeOOH) at various background concentrations and good agreement between the experimental data and the model was obtained. Both the size of the screening ions and the central particle size were shown to be of importance for the surface charge.     

Close-packed C(70)(3-) phases - synthesis, structure, and electronic properties

The high symmetry and resulting electronic degeneracy of the C(60)(3)(-) anion is viewed as the key molecular feature in the high superconducting transition temperatures of fulleride and oxidized fullerene systems. The experimental evaluation of this hypothesis requires the synthesis of face-centered cubic (fcc) trivalent fulleride anion salts derived from higher fullerenes such as C(70), which have thus far proved elusive with only stable A(1)C(70), A(4)C(70), and A(6)C(70) phases known. In this paper, we report the synthesis of fcc A(3)C(70) phases stabilized by size-matching the tetrahedral site with the sodium cation. The structures are strongly dependent on the cooling protocol due to the existence of metastable partially or completely orientationally disordered phases. EPR data indicate that the phases are metallic but not superconducting. The densities of states at the Fermi level appear too low to give superconductivity at above 5 K, consistent with recent observations that four electrons per C(70) anion are required for superconductivity. Size-matching on both the octahedral and tetrahedral sites is required for A(3)C(70) stability - K(2)CsC(70) is only stable at elevated temperature and Na(2)C(70) is unstable, the composition corresponding to C(70) and a sodium-rich trigonal phase.     

Synthesis of 3-substituted 4-piperidinones via a one-pot tandem oxidation-cyclization-oxidation process: stereodivergent reduction to 3,4-disubstituted piperidines

A novel approach to 3-substituted 4-piperidinones is described. The one-pot tandem oxidation-cyclization-oxidation of unsaturated alcohols 1a-e by PCC or PCC and trifluoromethanesulfonic acid affords piperidinones 2a-e in good yield. Reduction of 2a-e by L-Selectride gives the corresponding cis 3,4-disubstituted piperidines with diastereomeric ratios of >99:1. By contrast, reduction of 2a-e by Al-isopropoxydiisobutylalane gives the trans products with diastereomeric ratios of up to 99:1.     

Flexible polyfluorinated bis-diazirines as molecular adhesives

Motivated by a desire to develop flexible covalent adhesives that afford some of the same malleability in the adhesive layer as traditional polymer-based adhesives, we designed and synthesized two flexible, highly fluorinated bis-diazirines. Both molecules are shown to function as effective crosslinkers for polymer materials, and to act as strong adhesives when painted between two polymer objects of low surface energy, prior to thermal activation. Data obtained from lap-shear experiments suggests that greater molecular flexibility is correlated with improved mechanical compliance in the adhesive layer.

Flexible, highly fluorinated covalent adhesives are synthesized, and are shown to afford comparable C–H insertion efficiency and adhesion strength relative to a rigid analogue, while providing improved mechanical compliance in the adhesion layer.