Rapid and direct determination of glyphosate,glufosinate, and aminophosphonic acid by online preconcentration CE with contactless conductivity detection

Rapid and direct online preconcentration followed by CE with capacitively coupled contactless conductivity detection (CE‐C⁴D) is evaluated as a new approach for the determination of glyphosate, glufosinate (GLUF), and aminophosphonic acid (AMPA) in drinking water. Two online preconcentration techniques, namely large volume sample stacking without polarity switching and field‐enhanced sample injection, coupled with CE‐C⁴D were successfully developed and optimized. Under optimized conditions, LODs in the range of 0.01–0.1 μM (1.7–11.1 μg/L) and sensitivity enhancements of 48‐ to 53‐fold were achieved with the large volume sample stacking‐CE‐C⁴D method. By performing the field‐enhanced sample injection‐CE‐C⁴D procedure, excellent LODs down to 0.0005–0.02 μM (0.1–2.2 μg/L) as well as sensitivity enhancements of up to 245‐ to 1002‐fold were obtained. Both techniques showed satisfactory reproducibility with RSDs of peak height of better than 10%. The newly established approaches were successfully applied to the analysis of glyphosate, glufosinate, and aminophosphonic acid in spiked tap drinking water.     

A simple flow injection spectrophotometric determination method for iron(III) based on O-acetylsalicylhydroxamic acid complexation

A simple and rapid flow-injection spectrophotometric method for the determination of iron(III) and total iron is proposed. The method is based on the reaction between iron(III) and O-acetylsalicylhydroxamic acid (AcSHA) in a 2 % methanol solution resulting in an intense violet complex with strong absorption at 475 nm. Optimum conditions for the determination of iron(III) and the interfering ions were tested. The relative standard deviation for the determination of 5 μg L⁻¹ iron(III) was 0.85 % (n = 10), and the limit of detection (blank signal plus three times the standard deviation of the blank) was 0.5 μg L⁻¹, both based on the injection volumes of 20 μL. The method was successfully applied in the determination of iron(III) and total iron in water and ore samples. The method was verified by analysing a certified reference material Zn/Al/Cu 43XZ3F and also by the AAS method.     

Preparation of highly selective solid-phase extractants for Cibacron reactive dyes using molecularly imprinted polymers

Selective polymeric extractants were prepared for preconcentration of Cibacron reactive red dye, a dye that is often applied with Cibacron reactive blue and Cibacron reactive yellow for dyeing of fabrics. The best extractant was fabricated (in chloroform) using methacrylic acid (as monomer), ethylene glycol dimethacrylate (as crosslinker), AIBN (as initiator for polymerization), and red dye as template molecule, with a molar stoichiometric ratio of 8.0:40.0:2.5:0.63, respectively. The structure of the molecularly imprinted polymer (MIP) was robust, and resisted dissolution up to 260 °C. Compared with the un-imprinted polymer, the imprinted product has a large specific surface area which improved its adsorption capacity. The effect of imprinting was obvious from the adsorption capacity measured at pH 4 for red dye (the imprinted molecule), which was increased from 24.0 to 79.3 mg g⁻¹ after imprinting. Equilibrium adsorption studies revealed that the dye-imprinted-polymer enables efficient extraction of red dye even in the presence of blue and yellow dyes which have similar chemical natures to the red dye. The selectivity coefficients S _{red dye/dye}, were 13.9 and 17.1 relative to the yellow and blue dyes, respectively. The MIP was found to be effective for red dye preconcentration, with a preconcentration factor of 100, from tap water and treated textile wastewater. The factors affecting extraction of red dye by the MIP were studied and optimized. Under the optimized extraction conditions, red dye was selectively quantified in the presence of other competing dyes at a concentration of 20 μg L⁻¹ from different water systems with satisfactory recoveries (91–95%) and RSD values (∼5.0%).     

Imidomethylation of C-nucleophiles using O-phthalimidomethyl trichloroacetimidate and catalytic amounts of TMSOTf

The O-phthalimidomethyl trichloroacetimidate (1), as a latent aminomethylating agent, exhibits high electrophilicity towards a variety of C-nucleophiles in the presence of catalytic amounts of TMSOTf and mild reaction conditions. The nucleophiles include aromatics, alkenes and active methylene compounds 2-11 whereby a phthalimidomethyl group could be introduced to give compounds 12-22. Removal of the phthaloyl group gave the respective amines, β-amino ketones, and β-amino acids. The O-(trichloroacetamido)methyl trichloroacetimidate (35) was also found to be a good amidomethylating agent.     

Liquid crystals alignment with PbS nanosculptured thin films

Lead sulphide (PbS) nano-sculptured thin films (nSTFs) are prepared for the first time using glancing angle deposition technique by physical vapour deposition process. An anisotropic morphology is obtained, which provides an orientational effect. Due to this anisotropic nature of PbS nSTF an attempt has been made to check its effect on the alignment of nematic liquid crystals (LCs). Two different LC devices were fabricated, that is, anti-parallel aligned or electrically-controlled birefringence and hybrid twisted nematic. It is noticed that in both types of devices, good alignment is obtained with high extinction and contrast. A significant effect of these alignments on the electro-optic properties of the LC is reported such as the threshold voltage, response time and contrast ratio.     

N‐(Ferrocenecarbonyl)‐N′‐(quinolin‐8‐yl)thio­urea

In the title compound, [Fe(C₅H₅)(C₁₆H₁₂N₃OS)], the 8‐am­inoquinoline and acyl­thio­urea moieties are almost planar. There are two perpendicular arrangements of the mol­ecules in the crystal with slightly different conformations. The two cyclo­penta­dienyl rings in each mol­ecule are parallel and eclipsed.     

Intermolecular interactions in (arene)chromium carbonyl compounds: prediction of chiral crystal packing from racemate structure

Six X-ray crystal structures are reported, all containing substituted triphenylmethanol derivative 4 either alone or as its mono or bis(chromium tricarbonyl) complexes. All four chromium complexes studied crystallize with two independent molecules in the crystallographic asymmetric unit. It is demonstrated that from the X-ray crystal structure of the acentric racemic (+/-)-(1pR,1' 'R)(1pS,1' 'S)-[Cr(CO)(3)(eta(6)-t-BuC(6)H(3)(CMeOMe)CPh(2)OH)], (+/-)-3, it is possible to deduce the 4-fold helical structure of the chiral (-)-(1pR,1' 'R) isomer, (-)-3. The bimetallic derivatives demonstrate the ability to control intermolecular interactions by the positioning of relative stereochemistry.     

Oxygen bridged Homobinuclear Mn(II) compounds with Anthranilic acid: Theoretical calculations,oxidation and catalase activity

Two new homobinuclear manganese compounds with mixed ligands, [Mn₂(μ_1,1–2‐NH₂C₆H₄COO)₂(phen)₄](ClO₄)2(CH₃OH) ( 1 ), and [Mn₂(μ_1,3–2‐NH₂C₆H₄COO)₂(bipy)₄](ClO₄)2 ( 2 ) (NH₂C₆H₄COOH = anthranilic acid, bipy = 2,2′‐bipyridine, phen = 1,10‐ phenanthroline) were synthesized and thoroughly characterized by elemental analysis, IR, UV and single crystal X‐ray crystallography. X‐ray structure analysis shows that in the mono‐ and bidentate carboxylate bridged compounds, Mn–Mn distances of 1 and 2 are 3,461 Å, and 4,639 Å, respectively. The energy of the compounds was determined with a DFT (Density Functional Theory) calculation on B3LYP/6‐31G(d,p) optimized geometry by using the B3LYP/6‐31G(d,p) basis set. These compounds acts as biomimetic catalyst and show catalase‐like activity for the hydrogen peroxide dismutation at room temperature in different solvents with remarkable activity (TOF, Turnover frequency = mol of subst./(mol of cat. × time)) up to 12640 h^?1 with 1 , and 17910 h^?1 with 2 in Tris–HCl buffer). Moreover, the catalytic activity of 1 and 2 has been studied for oxidation of alcohols (cinnamyl alcohol, benzyl alcohol, cyclohexanol, 1‐octanol and 1‐heptanol) and alkenes (cyclohexene, styrene, ethyl benzene, 1‐octene and 1‐hexene) in a homogeneous catalytic system consisting t‐butylhydroperoxide (TBHP) as an oxidant in acetonitrile. Both compounds exhibited very high activity in the oxidation of cyclohexene to cyclohexanone (~80% selectivity, ~99% conversion in 1 h, TOF = 243 h^?1 and 226 h^?1) and cinnamyl alcohol to cinnamaldehyde (~64% selectivity) as the main product with very high TOF value (9180 h^?1 and 13040 h^?1 in the first minute of reaction) (~100% conversion in 0.5 h) with TBHP at 70 °C in acetonitrile, for 1 and 2 , respectively.     

Decomposition of methane over alumina supported Fe and Ni–Fe bimetallic catalyst: Effect of preparation procedure and calcination temperature

Catalytic decomposition of methane has been studied extensively as the production of hydrogen and formation of carbon nanotube is proven crucial from the scientific and technological point of view. In that context, variation of catalyst preparation procedure, calcination temperature and use of promoters could significantly alter the methane conversion, hydrogen yield and morphology of carbon nanotubes formed after the reaction. In this work, Ni promoted and unpromoted Fe/Al₂O₃ catalysts have been prepared by impregnation, sol–gel and co-precipitation method with calcination at two different temperatures. The catalysts were characterized by X-ray diffraction (XRD), N₂ physisorption, temperature programmed reduction (TPR) and thermogravimetric analysis (TGA) techniques. The catalytic activity was tested for methane decomposition reaction. The catalytic activity was high when calcined at 500 °C temperature irrespective of the preparation method. However while calcined at high temperature the catalyst prepared by impregnation method showed a high activity. It is found from XRD and TPR characterization that disordered iron oxides supported on alumina play an important role for dissociative chemisorptions of methane generating molecular hydrogen. The transmission electron microscope technique results of the spent catalysts showed the formation of carbon nanotube which is having length of 32–34 nm. The Fe nanoparticles are present on the tip of the carbon nanotube and nanotube grows by contraction–elongation mechanism. Among three different methodologies impregnation method was more effective to generate adequate active sites in the catalyst surface. The Ni promotion enhances the reducibility of Fe/Al₂O₃ oxides showing a higher catalytic activity. The catalyst is stable up to six hours on stream as observed in the activity results.     

Comprehensive studies on polymer electrolyte and dye-sensitized solar cell developed using castor oil-based polyurethane

Comprehensive characterization of new polymer electrolyte system prepared using polyurethane derived from castor oil polyol was undertaken. The castor oil polyol was synthesized via transesterification and reacted with 4,4′-diphenylmethane diisocyanate to form polyurethane. Polyurethane electrolyte films were prepared by addition of sodium iodide in different weight percentage with respect to the weight of the polymer. The electrolyte films were analyzed using Fourier transform infrared spectroscopy, dynamic mechanical analysis, electrochemical impedance spectroscopy, transference number measurement, and linear sweep voltammetry. Fourier transform infrared spectroscopy results confirmed the complexation between polymer and salt. Tan delta peak observed in the tan δ–temperature curve plotted using data obtained from dynamic mechanical analysis indicated that the glass transition temperature of polyurethane decreased with the addition of sodium iodide. The highest conductivity of 4.28 × 10^?7 S cm^?1 was achieved for the film with 30 wt% of sodium iodide. The performances of dye-sensitized solar cell using the electrolyte systems were analyzed in terms of short-circuit current density, open-circuit voltage, fill factor, and energy conversion efficiency. The polymer electrolyte with 30 wt% sodium iodide showed the best performance with energy conversion efficiency of 0.80%.