Synthesis and cytotoxicity of novel chromenone derivatives bearing 4-nitrophenoxy phenyl acryloyl moiety

This work describes synthesis of novel chromenone derivatives bearing 4-nitrophenoxy phenyl acryloyl moiety through the reaction of 4-(4-nitrophenoxy)benzaldehydes and 3-acetyl-2H-chromen-2-ones in refluxing toluene. Cytotoxicity of all compounds was evaluated using a tetrazolium (MTT) colorimetric assay against human breast cancer cell line, MDA-MB-231.     

Solubility and thermodynamic properties of acetaminophen in 1-hexyl-4-methylpyridinium bromide and water mixtures

The solubility data of acetaminophen in binary mixtures of 1-hexyl-4-methylpyridinium bromide and water were obtained over the temperature range from 293.15 to 313.15 K by using the gravimetric method under atmospheric pressure. Using the experimentally measured solubility values, the thermodynamic properties of dissolution, mixing and transfer processes were evaluated. The measured solubilities were correlated by the modified Wilson and the electrolyte non-random two liquid (E-NRTL) models.     

Spin-Dependent First-Principles Study on Optoelectronic Properties of Neodymium Zirconates Pyrochlores Nd2Zr2O7 in Fd-3m and Pmma Phases

Rare-earth zirconate pyrochlores (RE₂Zr₂O₇) are of much fundamental and technological interest as optoelectronic, scintillator and thermal barrier coating materials. For the first time, we report the detailed optoelectronic properties of rare-earth zirconates Nd₂Zr₂O₇ in both, i.e., for spin up and spin down states, via the use of first-principles density functional theory (DFT) procedure. To obtain the desired optoelectronic properties, we used a highly accurate method called full-potential linearized augmented plane wave (FPLAPW) within the generalized gradient approximation (GGA), parametrized with Hubbard potential U as an exchange-correlation function. The band gaps predicted for Nd₂Zr₂O₇ were of the order 2.4 eV and 2.5 eV in Fd-3m and Pmma symmetrical phases, respectively. For both the phases, our research involved a complete examination of the optical properties of Nd₂Zr₂O₇, including extinction coefficient, absorption coefficient, energy loss, function, reflectivity, refractive index, and real optical conductivity, analyzed in the spectral range from 0.0 eV to 14 eV. The calculated optical properties in both phases showed a considerable spin-dependent effect. The electronic bonding characteristics of different species in Nd₂Zr₂O₇ within the two crystal symmetries were explored via the density distribution mapping of charge.     

Spectrophotometric catalytic determination of ultra-trace amounts of selenium based on the reduction of resazurin by sulphide

A sensitive catalytic method for determining ng ml^? concentration of selenium is described. The method is based on the catalytic action of Se(IV) on the reduction of resazurin by sulphide, monitored spectrophotometrically at 605 nm. The linearity range of the calibration graph is dependent on the concentration of sulphide. The variables affecting the rate of the reaction were investigated and the optimum conditions were established. The method is simple, rapid, precise, sensitive and widely applicable. As low as 8.0 × 10^?4 μg ml^?1 of selenium can be determined. The relative standard deviation of seven determination of 10 ng Se was 0.7%. The determination of Se(IV) in the presence of Se(VI) and the determination of total selenium are also described.     

One-step Synthesis of 3,4-Dihydrobenzimidazo[2,1-<Emphasis Type="Italic">b</Emphasis>]quinazolin-1(2<Emphasis Type="Italic">H</Emphasis>)-ones in an Ionic Liquid

Summary.  A novel class of 3,4-dihydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones was synthesized in very short reaction times with good yields in the presence of 3-butyl-1-methyl imidazolium bromide as a room temperature ionic liquid at 120°C. The ionic liquid can be recycled for subsequent reactions without any loss of efficiency.     

Synthesis and characterization of soluble,fluorescent poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s containing 1,3,5‐triphenylbenzene segments

The bisphenol 4,4″‐dihydroxy‐5′‐phenyl‐m‐terphenyl ( 4 ), containing a 1,3,5‐triphenylbenzene moiety, was synthesized from a pyrylium salt obtained by the reaction of benzaldehyde with p‐methoxyacetophenone with boron trifluoride etherate as a condensing agent. Polymers were obtained from 4 by a nucleophilic displacement reaction with various activated difluoro monomers and with K₂CO₃ as a base. A series of new poly(arylene ether)s ( 8a – 8f ) were obtained that contained phenyl‐substituted m‐terphenyl segments in the polymer chain. Polymers with inherent viscosities of 0.41–0.99 dL/g were obtained in yields greater than 96%. The polymers were soluble in a variety of organic solvents, including nonpolar solvents such as toluene. Clear, transparent, and flexible films cast from CHCl₃ showed high glass‐transition temperatures (T_g = 198–270 °C) and had excellent thermal stability, as shown by temperatures of 5% weight loss greater than 500 °C. 4 was converted via N,N‐dimethyl‐O‐thiocarbamate into the masked dithiol 4,4″‐bis(N,N′‐dimethyl‐S‐thiocarbamate)‐5′‐phenyl‐m‐terphenyl and was polymerized with activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃ as a base in diphenyl sulfone as a solvent. A series of new poly(arylene thioether)s ( 9a – 9e ) were obtained with T_g values similar to those of 8a – 8e . 9a – 9e were further oxidized into poly(arylene sulfone)s with T_g values 40–80 °C higher than those for 8a – 8e and 9a – 9e . These polymers also had good solubility in organic solvents. A sulfonic acid group was selectively introduced onto the pendent phenyl group of polymers 8a and 8f by reaction with chlorosulfonic acid. The polymers were soluble in dipolar aprotic solvents and formed films via casting from dimethylformamide. Polymers 8a – 8f , 11a , and 11f showed blue and red fluorescence under ultraviolet–visible light with emission maxima at 380–440 nm. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 496–510, 2002; DOI 10.1002/pola.10136     

Magnetic molecularly imprinted polymer for the efficient and selective preconcentration of diazinon before its determination by high‐performance liquid chromatography

A molecularly imprinted polymer was selectively applied for solid‐phase extraction and diazinon residues enrichment before high‐performance liquid chromatography. Diazinon was thermally copolymerized with Fe₃O₄@polyethyleneglycol nanoparticles, methacrylic acid (functional monomer), 2‐hydroxyethyl methacrylate (co‐monomer), and ethylene glycol dimethacrylate (cross‐linking monomer) in the presence of acetonitrile (porogen) and 2,2‐azobisisobutyronitrile (initiator). Then, the imprinted diazinon was reproducibly eluted with methanol/acetic acid (9:1, v/v). The sorbent particles were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The comprehensive study of variables through experimental design showed that the maximum performance was achieved under these conditions: pH 7, 10 mL sample volume, 15 mg sorbent, 10 min vortex time, 5 min ultrasonic time, 200 μL methanol/acetic acid (9:1, v/v) as eluent, and 5 min desorption time. Under optimized conditions, the molecularly imprinted polymer solid‐phase extraction method demonstrated a linear range (0.02–5 g/mL), a correlation coefficient of 0.997, and 0.005 g/mL detection limit.     

Arsenic speciation and other parameters of surface and ground water samples of Jamshoro,Pakistan

This study evaluated and interpreted complex data sets of water samples collected from different sampling origins of ground water (hand pump and tube well) and surface water (municipal, river and canal). The aim was to provide information concerning the apportionment of pollution sources to obtain better information about water quality and possible distribution of As with respect to its speciation. The As (III) formed complex with ammonium pyrrolidinedithiocarbamate (APDC) and extracted by surfactant-rich phases in the non-ionic surfactant Triton X-114, while total iAs in water samples was adsorbed on titanium dioxide (TiO₂) and determined by electrothermal atomic absorption spectrometry. The accuracy of the proposed methodologies was confirmed by standard addition method. The recoveries of As (III) and total inorganic arsenic (iAs) were found to be >98%. The results revealed that the ground water of the area under study was more contaminated as compared to surface water samples. The mean concentration of As (III) and As (V) in the surface water samples was found to be 15.8 and 6.00?µg?L^?1, respectively, whereas, in the case of ground water samples, the contents of As (III) and As (V) ranged from 6.20 to 51.0 and 6.40 to 53.0?µg?L^?1, respectively. Principal component analysis performed on a combined (tube well and hand pump) samples data set extracted two significant factors explaining more than 60% of total variance, which suggested that the contamination sources might be natural or anthropogenic.     

Investigation of the optimum optical design for pulsed-laser crossed-beam thermal lens spectrometry in infinite and finite samples

Optimization of the optical design for pulsed-laser crossed-beam thermal lens (PLCBTL) spectrometry has been investigated. Experiments have been carried out with large samples as well as for very small samples in a microchannel and using different lens combinations to focus the probe and excitation beams. The results have been interpreted in terms of the influence of the excitation beam size as well as the degree of mode-mismatching of the excitation and probe beams on the optimum sample position and on the amplitude and decay of the photothermal signal. A semi-empirical formula that describes the influence of the sample position with respect to the probe beam waist has been established. We have shown that the optimum signal is inversely proportional to the waist of the excitation beam and is independent of the sample size as long as the size of the excitation beam is smaller than the microchannel. Time-resolved experiments have also shown that when the excitation beam is smaller than the sample, the signal decay depends not only on the size of the excitation beam but also on the mode-mismatching factor. Otherwise, the temporal characteristics are closely related to the size of the microchannel.