Preparation and characterization of Ni(II)/polyacrylonitrile and carbon nanotube composite modified electrode and application for carbohydrates electrocatalytic oxidation

A nickel(II) into porous polyacrylonitrile–carbon nanotubes composite modified glassy carbon electrode (Ni/PAN-CNT/GCE) was fabricated by simple drop-casting and immersing technique. The unique electrochemical activity of Ni/PAN-CNT composite modified glassy carbon electrode was illustrated in 0.10?M NaOH using cyclic voltammetry. The Ni/PAN-CNT/GCE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni/PAN/GCE and Ni/CNT/GCE. The results of electrochemical impedance spectroscopy and scanning electron microscopy indicated the successful immobilization for PAN-CNT composite film. Kinetic parameters such as the electron transfer coefficient, α, and rate constant, k _s, of the electrode reaction were determined. Ni/PAN-CNT/GCE also shows good electrocatalytic activity toward the oxidation of carbohydrates (glucose, sucrose, fructose, and sorbitol). The electrocatalytic response showed a wide linear range (10–1,500, 12–3,200, 7–3,500, and 16–4,200?μM for glucose, sucrose, fructose, and sorbitol, respectively) as well as its experimental limit of detection can be achieved 6, 7, 5, and 11?μM for glucose, sucrose, fructose, and sorbitol, respectively. The modified electrode for carbohydrates determination is of the property of simple preparation, good stability, and high sensitivity.     

Multiresidue determination of pesticides from aquatic media using polyaniline nanowires network as highly efficient sorbent for microextraction in packed syringe

A simple, rapid and sensitive method based on microextraction in packed syringe (MEPS), in combination with gas chromatography–mass spectrometry (GC–MS) was developed. Polyaniline (PANI) nanowires network was synthesized and used as sorbent of MEPS for the multiresidue determination of selected analytes from triazine, organochlrorine and organophosphorous pesticides in aqueous samples. The PANI nanowires network was prepared using soft template technique and its characterization was studied by scanning electron microscopy (SEM). The presence of micelles in this methodology showed to be an important parameter in shaping the growing polymer. Hexadecyltrimethylammonium bromide (HTAB) was used as structure directing agent in PANI preparation procedure and this was led to the formation of nanowires with diameters ranging from 35 nm to 45 nm. The synthesized PANI nanowires network showed higher extraction capability in comparison with the bulk PANI. Important parameters influencing the extraction and desorption processes including desorption solvent, elution volume, draw–eject cycles of sample, draw–eject mode, pH effect and amount of sorbent were optimized. Limits of detection were in the range of 0.07–0.3 ng mL⁻¹ using time scheduled selected ion monitoring (SIM) mode. The linearity of method was in the range from 0.5–200 ng mL⁻¹ to 0.2–1000 ng mL⁻¹. The method precision (RSD %) with three replicates were in the range of 5.3–18.4% at the concentration level of 5 ng mL⁻¹. The developed method was successfully applied to the Zayandeh-rood river water samples and the matrix factor obtained for the spiked real water samples were in the range of 0.79–0.94.     

Polyaniline-nylon-6 electrospun nanofibers for headspace adsorptive microextraction

A headspace adsorptive microextraction technique was developed using a novel polyaniline-nylon-6 (PANI-N6) nanofiber sheet, fabricated by electrospinning. The homogeneity and the porosity of the prepared PANI-N6 sheet were studied using the scanning electron microscopy (SEM) and nanofibers diameters were found to be around 200 nm. The novel nanofiber sheet was examined as an extracting medium to isolate some selected chlorobenzenes (CBs), as model compounds, from aquatic media. The extracted analytes were desorbed using μL-amounts of solvent and eventually an aliquot of extractant was injected into gas chromatography–mass spectrometry (GC–MS). Various parameters affecting the extraction and desorption processes were optimized. The developed method proved to be convenient and offers sufficient sensitivity and a good reproducibility. Limits of detection achieved for CBs with the developed analytical procedure ranged from 19 to 33 ng L^?1, while limits of quantification were from 50 to 60 ng L^?1. The relative standard deviations (RSD) at a concentration level of 0.1 ng mL^?1 and 1 ng mL^?1 were in the range of 8–14% and 5–11% (n = 3), respectively. The calibration curves of analytes were investigated in the range of 50–1000 ng L^?1 and R² between 0.9739 and 0.9932 were obtained. The developed method was successfully applied to the extraction of selected CBs from tap and river water samples. The relative recovery (RR) percentage obtained for the spiked real water samples at 0.1 ng mL^?1 and 1 ng mL^?1 level were 93–103% and 95–104%, respectively. The whole procedure showed to be conveniently applicable and quite easy to handle.     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

Hom-tensor relations for (quasi-) comodule algebras

We discuss quasi-Hopf algebras as introduced by Drinfeld and generalize the Hom-tensor adjunctions from the Hopf case to the quasi-Hopf setting, making the module category over a quasi-Hopf algebra H into a biclosed monoidal category. However, in this case, the unit and counit of the adjunction are not trivial and should be suitably modified in terms of the reassociator and the quasi-antipode of the quasi-Hopf algebra H. In a more general case, for a comodule algebra $ \mathcal{B} $ over a quasi-Hopf algebra H, the module category over $ \mathcal{B} $ need not to be monoidal. However, there is an action of a monoidal category on it. Using this action, we consider some kind of tensor and Hom-endofunctors of module category over $ \mathcal{B} $ and generalize some Hom-tensor relations from module category on H to this module category.     

B12N12纳米笼：潜在的二氧化氮检测传感器

利用密度泛函理论通过计算吸附能量、HOMO/LUMO能隙变化、电荷转移、结构扭曲等研究二氧化氮分子在B12N12纳米笼的吸附．此外,通过计算B₁₂N₁₂的电子结合能、Gibbs自由能、态密度和分子表面的静电势研究其稳定性和其它特性．B₁₂N₁₂纳米笼吸附二氧化氮显示三种构型．B₁₂N₁₂团簇的HOMO/LUMO能隙变化对二氧化氮分子的存在非常敏感,从自由团簇的6.84 eV降为NO₂/团簇稳定团簇的3.23 eV．团簇的导电性被极大地提高,表明B₁₂N₁₂纳米簇可能是潜在的二氧化氮气体分子检测传感器.     

Sub-Nominal Resolution Fourier Transform Spectrometry with Chip-Based Combs

Chip-based optical frequency combs address the demand for compact, bright, coherent light sources of equidistant phase-locked lines. Traditionally, the Fourier Transform Spectroscopy (FTS) technique is considered a suboptimal choice for resolving comb lines in chip-based sensing applications due to the requirement of long optical delays, and spectral distortion from the instrumental line shape. Here, a sub-nominal resolution FTS technique is developed that extracts the comb's offset frequency in any spectral region directly from the measured interferogram without resorting to nonlinear $$-to- $$ interferometry. This in turn enables 10's of MHz resolution spectrometry with millimeter optical retardations currently limited by the emission linewidth and phase noise of the used lasers. Low-pressure Doppler-broadened absorption lines probed by widely-tunable chip-scale mid-infrared optical frequen with electrical pumping are fully resolved over a span of tens of nanometers. This versatile technique paves the way for compact, electrostatically-actuated, or even all-on-chip high-fidelity FTS, and can be readily applied to boost the resolution of existing commercial instruments with compact interferometers several hundred times.     

Genetically Encoded Ratiometric RNA‐Based Sensors for Quantitative Imaging of Small Molecules in Living Cells

Precisely determining the intracellular concentrations of metabolites and signaling molecules is critical in studying cell biology. Fluorogenic RNA‐based sensors have emerged to detect various targets in living cells. However, it is still challenging to apply these genetically encoded sensors to quantify the cellular concentrations and distributions of targets. Herein, using a pair of orthogonal fluorogenic RNA aptamers, DNB and Broccoli, we engineered a modular sensor system to apply the DNB‐to‐Broccoli fluorescence ratio to quantify the cell‐to‐cell variations of target concentrations. These ratiometric sensors can be broadly applied for live‐cell imaging and quantification of metabolites, signaling molecules, and other synthetic compounds.     

Spectroscopic analysis,docking and molecular dynamics simulation of the interaction of cinnamaldehyde with human serum albumin

Azobenzene derivatives due to their photo- and electroactive properties are an important group of compounds finding applications in diverse fields. Due to the possibility of controlling the trans–cis isomerization, azo-bearing structures are ideal building blocks for development of e.g. nanomaterials, smart polymers, molecular containers, photoswitches, and sensors. Important role play also macrocyclic compounds well known for their interesting binding properties. In this article selected macrocyclic compounds bearing azo group(s) are comprehensively described. Here, the relationship between compounds’ structure and their properties (as e.g. ability to guest complexation, supramolecular structure formation, switching and motion) is reviewed.     

Binding properties of adenosine deaminase interacted with theophylline

Thermodynamic studies were carried out to evaluate the binding of theophylline on adenosine deaminase (ADA) in 50 mM sodium phosphate buffer pH 7.5, at 300 K, using isothermal titration calorimetry (ITC). A simple method for determination of binding isotherm in the drug--ADA interaction was applied using ITC data. ADA has two binding sites for theophylline, which show positive cooperativity in its sites. The intrinsic association equilibrium constants are 6 and 52 mM(-1) in the first and second binding sites, respectively. Hence, occupation of the first site has produced an appreciable enhancement by 8.7 of the binding affinity of the second site. The molar enthalpies of binding are -12.2 and -14.9 kJ/mol in the first and second binding sites, respectively.