Synthesis,crystal structure,and electrochemical properties of Ni(II) and Cu(II) complexes with two unsymmetrical N2O2 Schiff base ligands

Nickel(II) and copper(II) complexes of two unsymmetrical tetradentate Schiff base ligands [Ni(Me-salabza)] (1), [Cu(Me-salabza)] (2) and [Ni(salabza)] (3), {H₂salabza = N,N′-bis[(salicylidene)-2-aminobenzylamine] and H₂Me-salabza = N,N′-bis[(methylsalicylidene)-2-aminobenzylamine]}, have been synthesized and characterized by elemental analysis and spectroscopic methods. The crystal structures of 2 and 3 complexes have been determined by single crystal X-ray diffraction. Both copper(II) and nickel(II) ions adopt a distorted square planar geometry in [Cu(Me-salabza)] and [Ni(salabza)] complexes. The cyclic voltammetric studies of these complexes in dichloromethane indicate the electronic effects of the methyl groups on redox potential.     

Preparation,characterization, and applications of a novel solid-phase microextraction fiber by sol-gel technology on the surface of stainless steel wire for determination of poly cyclic aromatic hydrocarbons in aquatic environmental samples

A novel solid-phase microextraction(SPME) fiber was prepared using sol–gel technology with ethoxylated nonylphenol as a fiber coating material. The fiber was employed to develop a headspace SPME–GC–MS method suitable for quantification of 13 polycyclic aromatic hydrocarbons (PAHs) in water samples. Surface characteristics of the fibers were inspected by energy dispersive X-ray (EDX) spectroscopy as well as by scanning electron microscopy (SEM). The SEM measurements showed the presence of highly porous nano-sized particles in the coating. Important parameters affecting the extraction efficiency such as extraction temperature and time, desorption conditions as well as ionic strength have been evaluated and optimized. In the next step, the validation of the new method have been performed, finding it to be specific in the trace analysis of PAHs, with the limit of detection (LOD) ranging from 0.01 to 0.5 μg L⁻¹ and the linear range from the respective LOD to 200 μg L⁻¹with RSD amounting to less than 8%. The thermal stability of the fibers was investigated as well and they were found to be durable at 280 °C for 345 min. Furthermore, the proposed method was successfully applied for quantification of PAHs in real water samples.     

A chitosan–polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen

An extracting medium based on chitosan–polypyrrole (CS–PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS–PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS–PPy magnetic nanocomposite was compared with the CS-MNPs and Fe₃O₄ nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS–PPy magnetic nanocomposite possess more porous structure. Among different synthesized magnetic nanocomposites, CS–PPy magnetic nanocomposite showed a prominent efficiency. Influencing parameters on the morphology of CS–PPy magnetic nanocomposite such as weight ratio of components was also assayed. In addition, effects of different parameters influencing the extraction efficiency of naproxen including desorption solvent, desorption time, amount of sorbent, ionic strength, sample pH and extraction time were investigated and optimized. Under the optimum condition, a linear calibration curve in the range of 0.04–10 μg mL⁻¹ (R² = 0.9996) was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.015 and 0.04 μg mL⁻¹ (n = 3), respectively. The relative standard deviation for water sample spiked with 0.1 μg mL⁻¹ of naproxen was 3% (n = 5) and the absolute recovery was 92%. The applicability of method was extended to the determination of naproxen in tap water, human urine and plasma samples. The relative recovery percentages for these samples were in the range of 56–99%.     

Gel-assisted synthesis of anatase TiO2 nanoparticles and application for electrochemical determination of L-tryptophan

Anatase titanium dioxide nanoparticles (TiO₂-NPs) were synthesized with and without gelatin via the sol-gel method. The TiO₂-NPs were characterized by a number of techniques, such as thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV-Vis). The particle sizes of the TiO₂-NPs prepared with and without gelatin were ～13 and ～17 nm, respectively. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The results indicated that gelatin was a reliable green stabilizer, which can be used as a polymerization agent in the sol-gel method for synthesis of tiny size TiO₂-NPs. Moreover, the composite film was prepared by synthesized TiO₂-NPs nanoparticles and multi wall carbon nanotube (MWNT) on glassy carbon electrode (TiO₂-MWNT/GCE). The TiO₂-MWNT/GCE responded linearly to L-tryptophan (L-Trp) in the concentration of 1.0 × 10^?6 to 1.5 × 10^?4 M with detection limit of 5.2 × 10^?7 M at 3 using amperometry. The studied sensor exhibited good reproducibility and long-term stability.     

Stability and Rheological Properties of Suspended Pulp Particles Containing Orange Juice Stabilized by Gellan Gum

Gellan was used to suspend pulp particles in orange juice. Three groups of samples were prepared with 0%, 20%, and 40% orange juice concentrate and supplemented with gellan at different concentrations. A concentration-dependent increase in the size of gellan aggregates and gellan-protein assemblies was observed. Incorporation of gellan into the beverage with 0% juice concentrate changed the rheological behavior of sample to non-Newtonian shear-thinning fluid and increased its surface tension. When juice concentrate proportion was increased from 0% to 20%, the beverage viscosity increased. The highest gellan concentration resulted in a higher yield stress (σ₀) value and inhibited the pulp sedimentation completely.      

Synthesis and application of a thermosensitive tri-block copolymer as an efficient sample treatment technique for preconcentration and ultra-trace detection of lead ions

We have designed and synthesized a thermosensitive tri-block copolymer for selective trace extraction of Pb(II) ions from biological and food samples. The polymer was characterized by Fourier transform IR and NMR spectroscopy, and by gel permeation chromatography. The critical aggregation concentration and lower critical solution temperature were determined via fluorescence and UV spectrophotometry, respectively. The effects of solution pH value, amount of copolymer, of the temperature on extraction and on phase separation, and of the matrix on the extraction of Pb(II) were optimized. Pb(II) ions were then quantified by FAAS. The use of this copolymer resulted in excellent figures of merit including a calibration plot extending from 0.5 to 160 μg L^?1 (with an R² of >0.99), a limit of detection (LOD) as low as 90 pg L^?1, an extraction efficiency of >98 %, and relative standard deviations of <4 % for eight separate extraction experiments.

Functionalization of Graphene Oxide with 3‐Mercaptopropyltrimethoxysilane and Its Electrocatalytic Activity in Aqueous Medium

In this work, a highly dispersed graphene oxide (GO) was successfully functionalized with 3‐mercaptopropyltrimethoxysilane (MPTS) molecule by silanization method. The chemically generated GO and MPTS functionalized GO (MPTS‐GO) were structurally characterized by thermogravimetric analysis (TGA), X‐ray diffraction analysis (XRD), scanning electron microscope (SEM), energy dispersive X‐ray (EDAX), fourier transform infrared spectroscopy (FT‐IR) and ultraviolet visible spectroscopy (UV‐Vis) techniques. The MPTS‐GO is highly suspensable in water. The thermal and conductivity results for MPTS‐GO are significantly increased compared to GO. Moreover, glassy carbon electrode modified with MPTS‐GO hybrid (MPTS‐GO/GCE) was prepared by casting of the MPTS‐GO solution on GCE. The MPTS‐GO/GCE showed an excellent electrocatalytic activity towards methionine (Met). This was understood from the observed less positive oxidation potential and higher oxidation current when compared to bare GC electrode. The MPTS‐GO has excellent electrocatalytic activity, making it an ideal candidate for sensor applications.     

Application of the UNIFAC model for prediction of surface tension and thickness of the surface layer in the binary mixtures

The specific sorption of Eu(III) and Y(III) on γ-alumina was investigated with solid-state (1)H NMR. Solution pH was shown to influence the recorded (1)H NMR spectra of γ-alumina, and thus, metal ion-containing samples were prepared under constant pH conditions, 8.00±0.05. The metal ion concentration in the samples was varied between 6.58×10(-7) M - 3.95×10(-4) M in case of Y(3+) and 6.58×10(-8) M - 1.32×10(-4) M in case of Eu(3+). The mineral concentration was kept constant at 4 g/l. After separation of the liquid phase, the samples were dried under vacuum to remove physisorbed water from the mineral surface. However, even after 48 h of drying at 150°C and 20 mTorr, water was still detected in the proton spectra as two distinct peaks with chemical shifts at 1.3 and 0.9 ppm. The europium addition to the γ-alumina samples induced significant spectral changes in comparison with yttrium-containing samples. These changes were attributed to the paramagnetism of europium rather than to complexation reactions occurring on the mineral surface. Proton spectra obtained for yttrium samples were therefore used to detect the spectral changes induced by the sorption reaction itself. The results revealed a large distribution of protons being removed from the mineral surface upon yttrium complexation. Removed protons were assigned to both bridging surface hydroxyls such as (Al(VI))(2)-OH as well as to terminal hydroxyls, e.g., of type Al(VI)-OH. Acidic protons belonging to (Al(VI))(3)-OH groups were not observed to participate in the surface reaction.