Nanocellulose as a green and sustainable emerging material in energy applications: a review

In this review, a recent prospect on application of nanocellulose in energy application has been highlighted. To achieve high capacities that are essential for effective extraction of interesting ions and for faster charging and discharging in the energy storage devices, nanocellulose in the conducting matrix must obviously assist the dual purpose of mechanically improving and reinforcing the specific charge capacity. The abundant number of nanocellulose hydroxyl groups on the surface favors the formation of hydrogen bonding in an ordered structure and lead to it having high strength and stiffness properties at low density. This brought up the idea of utilizing nanocellulose as a reinforcement and energy adsorption agent originating from the possibility of exploiting the high strength and stiffness of cellulose crystals in composite applications. Copyright © 2017 John Wiley & Sons, Ltd.     

Efficient synthesis of alkyl 2-[2-(arylcarbonylimino)-3-aryl-4-oxo-1, 3-thiazolan-5-ylidene]-acetates

Reaction of 1-aryl-3-arylcarbonylthioureas with dialkyl acetylenedicarboxylates in CH₂Cl₂ at room temperature leads to alkyl 2-[2-(arylcarbonylimino)-3-aryl-4-oxo-1,3-thiazolan-5-ylidene]-acetates in good yields.     

Polybutylene terephthalate-nickel oxide nanocomposite as a fiber coating

A highly efficient polybutylene terephthalate (PBT)-based nanocomposite containing nickel oxide nanoparticles was synthesized by electrospinning technique and used as a fiber coating for solid phase microextraction. The influential morphological parameters and capability of the prepared nanocomposite including the NiO content, the coating time, the PBT concentration and applied voltage were considered for optimization. The applicability of the synthesized fiber coating was examined by headspace solid phase micro extraction and gas chromatography mass spectrometry detection of some volatile organic compounds in aqueous samples. Among the synthesized nanocomposites and pristine PBT nanofibers, the fiber coating with 14% of NiO nanoparticles doping level exhibited the highest extraction efficiency. In addition, important parameters influencing the extraction/desorption process were investigated and optimized. The detection limits were less than 5 ng L⁻¹ using the selected ion monitoring mode. The inter-day and intra-day precisions of the developed method under optimized conditions were below 11%. The method showed a linearity in the range of 10–1000 ng L⁻¹ with the correlation coefficient greater than 0.9987. The optimized method was applied to the sampling of some volatile organic compounds from real water samples. The developed method is convenient, rapid, simple, easy and inexpensive and offers high sensitivity and sufficient reproducibility.     

Sol–gel-based silver nanoparticles-doped silica – Polydiphenylamine nanocomposite for micro-solid-phase extraction

A nanocomposite of silica-polydiphenylamine doped with silver nanoparticles (Ag–SiO₂-PDPA) was successfully synthesized by the sol–gel process. For its preparation, PDPA was mixed with butanethiol capped Ag nanoparticles (NPs) and added to the silica sol solution. The Ag NPs were stabilized as a result of their adsorption on the SiO₂ spheres. The surface characteristic of nanocomposite was investigated using scanning electron microscopy (SEM). In this work the Ag–SiO₂-PDPA nanocomposite was employed as an efficient sorbent for micro-solid-phase extraction (μ-SPE) of some selected pesticides. An amount of 15 mg of the prepared sorbent was used to extract and determine the representatives from organophosphorous, organochlorine and aryloxyphenoxy propionic acids from aqueous samples. After the implementation of extraction process, the analytes were desorbed by methanol and determined using gas chromatography–mass spectrometry (GC–MS). Important parameters influencing the extraction and desorption processes such as pH of sample solution, salting out effect, type and volume of the desorption solvent, the sample loading and eluting flow rates along with the sample volume were experimentally optimized. Limits of detection (LODs) and the limits of quantification (LOQs) were in the range of 0.02–0.05 μg L⁻¹ and 0.1–0.2 μg L⁻¹, respectively, using time scheduled selected ion monitoring (SIM) mode. The relative standard deviation percent (RSD %) with four replicates was in the range of 6–10%. The applicability of the developed method was examined by analyzing different environmental water samples and the relative recovery (RR %) values for the spiked water samples were found to be in the range of 86–103%.     

Label‐Free Electrochemical Aptasensor for Determination of Chloramphenicol Based on Gold Nanocubes‐Modified Screen‐Printed Gold Electrode

An ultrasensitive label‐free electrochemical aptasensor was developed for selective detection of chloramphenicol (CAP). The aptasensor was made using screen‐printed gold electrode modified with synthesized gold nanocube/cysteine. The interactions of CAP with aptamer were studied by cyclic voltammetry, square wave voltammetry (SWV) and electrochemical impedance spectroscopy. Under optimized conditions, two linear calibration curves were obtained for CAP determination using SWV technique, from 0.03 to 0.10 µM and 0.25–6.0 µM with a detection limit of 4.0 nM. The aptasensor has the advantages of good selectivity and stability and applied to the determination of CAP in human blood serum sample.     

Selective and Sensitive Determination of Uranyl Ions in Complex Matrices by Ion Imprinted Polymers‐Based Electrochemical Sensor

We report on the design of a UO₂²⁺‐selective electrode based on the use of UO₂²⁺ imprinted polymer nanoparticles (IP‐NPs), and its application for the differential pulse adsorptive cathodic stripping voltammetry determination of uranyl ions. A carbon paste electrode was modified with the IP‐NPs, and differential pulse adsorptive cathodic stripping voltammetry was applied as the detection technique after open‐circuit sorption of UO₂²⁺ ions. The modified electrode responses to UO₂²⁺ was linear in the 0.1 µg L^?1 to 10 µg L^?1 and in the 0.01 mg L^?1 to 10 mg L^?1. The method detection limit of the sensor was 0.03 µg L^?1.     

Centralised Versus Decentralised Active Control of Boundary Layer Instabilities

We use linear control theory to construct an output feedback controller for the attenuation of small-amplitude three-dimensional Tollmien-Schlichting (TS) wavepackets in a flat-plate boundary layer. A three-dimensional viscous, incompressible flow developing on a zero-pressure gradient boundary layer in a low Reynolds number environment is analyzed using direct numerical simulations. In this configuration, we distribute evenly in the spanwise direction up to 72 localised objects near the wall (18 disturbances sources, 18 actuators, 18 estimation sensors and 18 objective sensors). In a fully three-dimensional configuration, the interconnection between inputs and outputs becomes quickly unfeasible when the number of actuators and sensors increases in the spanwise direction. The objective of this work is to understand how an efficient controller may be designed by connecting only a subset of the actuators to sensors, thereby reducing the complexity of the controller, without comprising the efficiency. If n and m are the number of sensor-actuator pairs for the whole system and for a single control unit, respectively, then in a decentralised strategy, the number of interconnections deceases mn compared to a centralized strategy, which has n ² interconnections. We find that using a semi-decentralized approach – where small control units consisting of 3 estimation sensors connected to 3 actuators are replicated 6 times along the spanwise direction – results only in a 11 % reduction of control performance. We explain how “wide” in the spanwise direction a control unit should be for a satisfactory control performance. Moreover, the control unit should be designed to account for the perturbations that are coming from the lateral sides (crosstalk) of the estimation sensors. We have also found that the influence of crosstalk is not as essential as the spreading effect.     

Determination of zinc in water samples by flame atomic absorption spectrometry after homogeneous liquid-liquid extraction

In this study, a new and simple homogeneous liquid-liquid extraction (HLLE) method based on a pH-independent phase-separation process was developed using a ternary solvent system [water-tetrabutylammonium ion (TBA ⁺)-chloroform] for the preconcentration of Zn²⁺ ions. A Schiff’s base ligand was used as the chelating agent prior to Zn²⁺ ions extraction. Flame atomic absorption spectrophotometry using acetylene-air flame was used for the quantification of analyte after preconcentration. The phase separation occurred due to ion-pair formation of TBA and perchlorate ion. The sedimented phase was then separated using a 100 μL micro-syringe and diluted to 1.0 mL with ethanol. The sample was introduced into the flame by conventional aspiration. After the optimization of complexation and extraction conditions such as pH 9.0, [ligand] = 1.0 × 10⁻⁵ M, [TBA⁺] = 2.0 × 10⁻² M, 100.0 μL of [CHCl₃] and [CLO₄⁻] = 2.0 × 10⁻² M, a preconcentration factor of 100 was achieved for only 10 mL of the sample. The relative standard deviation was 2.3% (n = 10). The limit of detection was sufficiently low and at ppb level. The proposed method was applied to the extraction and determination of Zn²⁺ in natural water samples with satisfactory results.     

Flame atomic absorption spectrometric determination of trace amounts of Pb(II) and Cr(III) in biological, food and environmental samples after preconcentration by modified nano-alumina

A new solid-phase extraction sorbent was used for the preconcentration of Pb(II) and Cr(III) ions prior to their determination by flame atomic absorption spectrometry. It was prepared by immobilization of 2,4-dinitrophenylhydrazine on nano-alumina coated with sodium dodecyl sulfate. The sorbent was characterized by scanning electron microscopy, N₂ adsorption and Fourier transform infrared spectrometry, and used for preconcentration and separation of Pb(II) and Cr(III) from aqueous solutions. The ions on the sorbent were eluted with a mixture of nitric acid and methanol. The effects of sample pH, flow rates of samples and eluent, type of eluent, breakthrough volume and potentially interfering ions were studied. Linearity is maintained between 1.2 and 350???g?L^-1 of Pb(II), and between 2.4 and 520???g?L^-1 of Cr(III) for an 800-mL sample. The detection limit (3?s, N?=?10) for Pb(II) and Cr(III) ions is 0.43 and 0.55???g?L^-1, respectively, and the maximum preconcentration factor is 267. The method was successfully applied to the evaluation of these trace and toxic metals in various water, food, industrial effluent and urine samples.