Spectrofluorimetric determination of copper(II) by its static quenching effect on the fluorescence of 4,5-dihydroxy-1,3-benzenedisulfonic acid

A spectrofluorimetric method has been developed for the determination of trace Cu(II) in real samples with 4,5-dihydroxy-l,3-benzenedisulfonic acid (Tiron) as a fluorimetric reporter. Tiron is very soluble in water and is a good fluorimetric reagent. However, as Tiron was complexed with Cu(II), the fluorescence intensity decreased proportionally to the concentration of Cu(II) by a static quenching effect. The excitation wavelength and the fluorescence wavelength of Tiron were 294 and 350 nm, respectively, as it was caused by a quenching effect from Cu(II) at pH 8.0. The highest sensitivity was shown at Tiron concentration of 5.0x10(-5) M. To enhance the quenching effect, the Cu(II)-Tiron complex solution was heated up to 80 degrees C for 90 min. As for Cu(II), the interference by Co(II) was very serious, which was eliminated by oxalate ion. The linear response to Cu(II) was shown at the concentration range between 5.0x10(-7) and 1.0x10(-5) M. With this proposed method, the detection limit of Cu(II) was 3.83(+/-0.09)x10(-7) M. Recoveries of Cu(II) in the diluted brass samples and the stream water samples were almost 100%. Based on results from the experiment, this proposed technique could be applied to the practical determination of Cu(II) in real samples.     

Effect of plant matrix and fluid ethanol concentration on supercritical fluid extraction efficiency of schisandrin derivatives

An investigation of the effect of plant matrix on the supercritical fluid extraction efficiency of five schisandrin derivatives is reported, exhibiting a great difference with respect to extraction efficiency depending on the matrix. Pure supercritical CO2 at 60 degrees C and 34.0 MPa cannot fully recover schisandrin derivatives from the leaves as much as from the other matrices. Only 36.9% of these compounds are extracted from leaves of Schisandra chinensis by supercritical CO2 in comparison with organic solvent extraction. However, more than 80% of schisandrin derivatives are obtained from both stem and fruit parts. Ethanol addition also shows a different effect depending on plant matrix; that is, CO2 modified with 10% ethanol could enhance the yield of schisandrin derivatives from leaves by four times when compared with that of pure CO2, but it has little effect on both stems and fruits.     

Anti-Inflammatory,Antidiabetic Properties and In Silico Modeling of Cucurbitane-Type Triterpene Glycosides from Fruits of an Indian Cultivar of Momordica charantia L.

Diabetes mellitus is a chronic disease and one of the fastest-growing health challenges of the last decades. Studies have shown that chronic low-grade inflammation and activation of the innate immune system are intimately involved in type 2 diabetes pathogenesis. Momordica charantia L. fruits are used in traditional medicine to manage diabetes. Herein, we report the purification of a new 23-O-β-d-allopyranosyl-5β,19-epoxycucurbitane-6,24-diene triterpene (charantoside XV, 6) along with 25ξ-isopropenylchole-5(6)-ene-3-O-β-d-glucopyranoside (1), karaviloside VI (2), karaviloside VIII (3), momordicoside L (4), momordicoside A (5) and kuguaglycoside C (7) from an Indian cultivar of Momordica charantia. At 50 µM compounds, 2–6 differentially affected the expression of pro-inflammatory markers IL-6, TNF-α, and iNOS, and mitochondrial marker COX-2. Compounds tested for the inhibition of α-amylase and α-glucosidase enzymes at 0.87 mM and 1.33 mM, respectively. Compounds showed similar α-amylase inhibitory activity than acarbose (0.13 mM) of control (68.0–76.6%). Karaviloside VIII (56.5%) was the most active compound in the α-glucosidase assay, followed by karaviloside VI (40.3%), while momordicoside L (23.7%), A (33.5%), and charantoside XV (23.9%) were the least active compounds. To better understand the mode of binding of cucurbitane-triterpenes to these enzymes, in silico docking of the isolated compounds was evaluated with α-amylase and α-glucosidase.     

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

A series of fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) were synthesized via aromatic nucleophilic substitution polymerization. The sulfonation content (SC) was controlled by the feed ratios of sulfonated and nonsulfonated monomers. Flexible and strong membranes in the sulfonic acid form were obtained from cast membranes in the sodium salt forms by treatment with acid. The thermal properties, water uptake, swelling ratio, water state, oxidative stability, proton conductivity and methanol permeability were investigated. All the polymers had proton conductivities greater than 1 × 10⁻² S/cm at room temperature, and the conductivity values of m-SPFEEKK-80 and p-SPFEEKK-80 were up to 1.86 × 10⁻¹ and 1.78 × 10⁻¹ S/cm at 100 °C. This series of polymers also possessed good dimensional stability in water and low methanol crossover.     

Proanthocyanidins of Rhodiola semenovii

The structures of two compounds previously isolated fromRhodiola semenovii, rhodokhinoside (I) and rhodikhim (II), have been established.Institute of the Chemistry of Plant Substances, Uzbek. Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 771–777, November–December, 1991.     

Thermodynamic Parameters for the Association of Fluorinated Benzenesulfonamides with Bovine Carbonic Anhydrase II

This paper describes a calorimetric study of the association of a series of seven fluorinated benzenesulfonamide ligands (C₆H_nF_5?nSO₂NH₂) with bovine carbonic anhydrase II (BCA). Quantitative structure–activity relationships between the free energy, enthalpy, and entropy of binding and pK_a and log P of the ligands allowed the evaluation of the thermodynamic parameters in terms of the two independent effects of fluorination on the ligand: its electrostatic potential and its hydrophobicity. The parameters were partitioned to the three different structural interactions between the ligand and BCA: the Zn^II cofactor–sulfonamide bond (≈65 % of the free energy of binding), the hydrogen bonds between the ligand and BCA (≈10 %), and the contacts between the phenyl ring of the ligand and BCA (≈25 %). Calorimetry revealed that all of the ligands studied bind in a 1:1 stoichiometry with BCA; this result was confirmed by ¹⁹F NMR spectroscopy and X‐ray crystallography (for complexes with human carbonic anhydrase II).     

Ring closure reaction of 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidinecarboxylic acid with acetic anhydride. Synthesis of pyrimido[5,4-c] [1,5]benzoxazepin-5(11H)ones

Syntheses of 11-acety1-2-phenylpyrimido[5,4-c][1,5]benzoxazepin-5(11H)one ( 16a ) and analogs ( 16b,c, 22 ) were described. The reaction of 4-chloro-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 7 ) with 2-aminophenol afforded 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidine-carboxylic acid ethyl ester ( 8a ). The latter was also prepared by catalytic reduction of 4-(2-nitrophenoxy)-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 9 ), which was obtained from 7 and 2-nitrophenol. Involvement of 4-(2-aminophenoxy)-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 12a ) in this reduction as an intermediate was demonstrated by an independent synthesis of 12a and its subsequent rearrangement to 8a. Hydrolysis of 8a or 12a gave 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidinecarboxylic acid ( 15a ). Reaction of 15a with acetic anhydride afforded 16a , the first member of a novel ring system, the pyrimido[5,4- c ][1,5]-benzoxazepin. Additional examples ( 16b,c ) were prepared similarly. The corresponding 11-ethyl derivative ( 22 ) was prepared in similar fashion, starting with 7 and 2-ethylaminophenol. A possible reaction mechanism for the formation of 16a-c from 15a-c and acetic anhydride was discussed.     

Synthesis and properties of amine‐containing poly(arylene ether sulfone) as an anion‐exchange matrix

Poly(arylene ether sulfone) (PSF), showing good thermal stability and excellent mechanical properties, was synthesized as an anion‐exchange matrix. It was synthesized by the condensation polymerization between bisphenol A and 4,4′‐dichlorodiphenylsulfone. 1°‐Amine‐containing poly(arylene ether sulfone) (1°‐APSF) was synthesized by the reduction reaction of a nitrated PSF. Then, it was transferred to 3°‐amine‐containing poly(arylene ether sulfone) (3°‐APSF) by the alkylation of the amine of 1°‐APSF. The properties of PSF, 1°‐APSF, and 3°‐APSF were investigated by Fourier transform infrared, ¹H NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The introduction of the 3°‐amine group into PSF increased the glass‐transition temperature but decreased thermooxidative stability. The ion‐exchange capacities of 1°‐APSF and 3°‐APSF were shown to be 2.24 and 2.86 mequiv/g, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4281–4287, 2002     

The first fullerene-metal sandwich complex: an unusually strong electronic communication between two C(60) cages

Reaction of Rh(6)(CO)(9)(dppm)(2)(mu(3)-eta(2),eta(2),eta(2)-C(60)) (1) with C(60) in refluxing chlorobenzene followed by treatment with CNR (R = CH(2)C(6)H(5)) at room temperature affords the first fullerene-metal sandwich complex Rh(6)(CO)(5)(dppm)(2)(CNR)(mu(3)-eta(2),eta(2),eta(2)-C(60))(2) (2). Compound 2 has been characterized by an X-ray diffraction study. Electrochemical study of 2 reveals six well-separated reversible redox couples localized at C(60) cages due to a strong electronic communication between the two C(60) centers via the Rh(6) cluster spacer.     

The effect of phenyl substituents on the release rates of esterase-sensitive coumarin-based prodrugs

A coumarin-based prodrug system has been recently developed in our laboratory for the preparation of esterase-sensitive prodrugs of amines, peptides, and peptidomimetics. The drug release rates from this prodrug system were found to be dependent on the structural features of the drug moiety. In certain cases, the release can be undesirably slow for drugs that are secondary amines with relatively high pKa's. Aimed at finding ways to manipulate the release rates to suit the need of different drugs, we have examined the effect of the phenyl ring substitutions on the release kinetics of such prodrugs and found that appropriately positioned alkyl substituents on the phenyl ring could help to facilitate the release by as much as 16-fold. Therefore, introduction of alkyl substituents on the phenyl ring should allow us to manipulate the release rates and, therefore, time profiles for different drugs.