Comparison of photodynamic efficacy of tetraarylporphyrin pegylated or encapsulated in liposomes: In vitro studies

Two photosensitizing systems: (1) tetrakis(4-hydroxyphenyl)porphyrin (p-THPP) encapsulated in sterically stabilized liposomes (SSL) and (2) p-THPP functionalized by covalent attachment of poly(ethylene glycol) (p-THPP–PEG₂₀₀₀) were studied in vitro. The dark and photo cytotoxicity of these systems were evaluated on two cell lines: HCT 116, a human colorectal carcinoma cell line, and DU 145, a prostate cancer cell line and compared with these determined for free p-THPP. It was demonstrated that both encapsulation in liposomes as well as attachment of PEG chain result in pronounced reduction of the dark cytotoxicity of the parent porphyrin. The liposomal formulation showed higher than p-THPP–PEG₂₀₀₀ photocytotoxicity towards both cell lines used in the studies.     

Fluorescence properties of some 2-(4-amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones

2-(4-Amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones have been studied to evaluate their fluorescence properties and possible use as molecular fluorescent probes. The amino group was substituted with various alkyl moieties possessing a suitable terminal functional group (such as hydroxy or amino group) that could serve to bind a 3-hydroxyquinolin-4(1H)-one (3HQ) fluorescence label to a biomolecule. Besides simple hydrocarbon chains, ligands containing ethylenoxy units as optimal spacers were also tested. The structure-fluorescence properties and theoretical applicability of the studied molecules are discussed.     

Monitoring the Transition from Spherical to Polymer‐like Surfactant Micelles Using Small‐Angle X‐Ray Scattering

Despite over a century of modern surfactant science, the kinetic pathways of morphological transitions in micellar systems are still not well understood. This is mainly as a result of the lack of sufficiently fast methods that can capture the structural changes of such transitions. Herein, a simple surfactant system consisting of sodium dodecyl sulfate (SDS) in aqueous NaCl solutions is investigated. Combining synchrotron radiation small‐angle X‐ray scattering (SAXS) with fast stopped‐flow mixing schemes allows monitoring the process where polymer‐like micelles are formed from globular micelles when the salt concentration is suddenly increased. The results show that “worm‐like” micelles are formed by fusion of globular micelles and short cylinders in a fashion that bears similarities to a step‐like polymerization process.     

Copper(II) complexes of 2-amino-5-chloro-3-fluoropyridine: syntheses and magnetic properties of (3,5-FCAP)2CuX2 and (3,5-FCAPH)2CuX4

Using 2-amino-5-chloro-3-fluoropyridine, two new copper halide coordination complexes and two new salts have been synthesized: [(3,5-FCAP)₂CuCl₂] (1), [(3,5-FCAP)₂CuBr₂](2), (3,5-FCAPH)₂[CuCl₄] (3) and (3,5-FCAPH)₂[CuBr₄] (4) [3,5-FCAP?=?2-amino-5-chloro-3-fluoropyridine; 3,5-FCAPH?=?2-amino-5-chloro-3-fluoropyridinium]. These complexes have been analyzed through single-crystal X-ray diffraction and temperature-dependent magnetic susceptibility. Compounds 1 and 2 crystallize in the triclinic space group P-1, while 3 and 4 crystallize in the monoclinic space group P2₁/c. All structures were distinct, with 1 giving a bihalide bridged chain, 2 yielding a halide bridged dimer, 3 forming a two-halide bridged chain via short Cl???Cl contacts, and 4 producing a rectangular sheet via short Br???Br contacts. All four compounds exhibit anti-ferromagnetic interactions and were fit to linear chain (1 and 3), dimer (2), and rectangular 2-D sheet (4) models. The resulting J/k_B values are ?3.4(1), ?31.3(8), ?0.9(1), and ?9.46(6)?K with an α value (α?=?J?/J) of 0.06(2), respectively.     

Effect of Inorganic Solids,Wax to Asphaltene Ratio,and Water Cut on the Stability of Water-in-Crude Oil Emulsions

The formation of stable water-in-crude oil emulsions during petroleum production and refinery may create sever and costly separation problems. It is very important to understand the mechanism and factors contributing to the formation and stabilization of such emulsions for both great economic and environmental development. This article investigates some of the factors controlling the stability of water-in-crude oil emulsions formed in Burgan oil field in Kuwait. Water-in-crude oil emulsion samples collected from Burgan oil filed have been used to separate asphaltenes, resins, waxes, and crude oil fractions. These fractions were used to prepare emulsion samples to study the effect of solid particles (Fe₃O₄) on the stability of emulsions samples. Results indicate that high solid content lead to higher degree of emulsion stability. Stability of emulsion samples under various waxes to asphaltenes (W/A) ratios have also been tested. These tests showed that at low W/A content, the emulsions were very stable. While at a wax to asphaltene ratio above 1 to 1, the addition of wax reduced emulsion stability. Stability of emulsion samples with varying amount of water cut has also been investigated. Results indicated that stability and hence viscosity of emulsion increases as a function of increasing the water cut until it reaches the inversion point where a sharp decline in viscosity takes place. This inversion point was found to be approximately at 50% water cut for the crude oils considered in this study.     

A Multicolumn Ion Chromatographic Determination of Nitrate and Sulfate in Waters Containing Humic Substances

Abstract

A three-column ion chromatographic system for the removal of humic substances from natural waters, and subsequent on-line concentration and determination of nitrate and sulfate using non-suppressed ion chromatography is presented. Humic substances are removed using disposable adsorption columns packed with chemically bonded amine silica material. The sample is directly transfered to an ion exchange column where the anions are concentrated ca 10 times. After reversing the flow, the ions are transferred to a third column where they are separated and quantified. The detection limit is less than 1 mg L^?1 of nitrate or sulfate in water containing 45mgL^?1 of humic acid.     

磷掺杂TiO2薄膜的制备与表征及其可见光照射下光催化降解邻苯二甲酸丁苄酯性能（英文）

P‐doped TiO2 (PTIO) thin‐films with different P contents were prepared using a sol‐gel method. The thin‐film samples were characterized using various techniques. The photocatalytic activity was evaluated by decomposing butyl benzyl phthalate under visible‐light irradiation. The results showed that the transformation of anatase to the rutile phase was inhibited and grain growth of TiO2 was prevented by P doping. The results confirm that the doped P atoms existed in two chemical forms, and those incorporated in the TiO2 lattice may play a positive role in photocatalysis. The high photocatalytic activities of the PTIO thin‐films may be the result of extrinsic absorption through the creation of oxygen vacancies, rather than excitation of the intrinsic absorption band of bulk TiO2 . The PTIO can be recycled with little depression of the photocatalytic activity. After six cycles, the photocatalytic activity of the PTIO film was still higher than 98%.     

A sensitive and selective determination method of histamine by HPLC with intramolecular excimer-forming derivatization and fluorescence detection

A highly sensitive, selective and simple method is described for the determination of histamine by high-performance liquid chromatography (HPLC) with fluorescence detection. The method is based on an intramolecular excimer-forming fluorescence derivatization of histamine with 4-(1-pyrene)butyric acid N-hydroxysuccinimide ester (PSE), followed by reversed-phase HPLC. Histamine, having two amino moieties in a molecule, was converted to the dipyrene-labeled derivative by reaction with PSE. The derivative afforded intramolecular excimer fluorescence (450-540 nm), which can clearly be discriminated from the monomer fluorescence (370-420 nm) emitted from PSE. Typically, a 10 micro L sample solution was mixed with 100 micro L of derivatization reagent solution, which was a mixture of 0.5 mm PSE in acetonitrile and 0.5 mm potassium carbonate in water (8:2, v/v). The derivatization was carried out at 100 degrees C for 90 min. The PSE derivative of histamine could be separated by reversed-phase ODS column with isocratic elution using acetonitrile:water (82:18, v/v) containing 0.03% triethylamine. The detection limit (singnal-to-noise ratio = 3) of histamine was 0.5 fmol for a 30 micro L injection. The method was successfully applied to the determination of histamine in human urine, and had enough selectivity and sensitivity for urinary histamine quantification.     

Non-Lithography Hydrodynamic Printing of Micro/Nanostructures on Curved Surfaces

A key issue of micro/nano devices is how to integrate micro/nanostructures with specified chemical components onto various curved surfaces. Hydrodynamic printing of micro/nanostructures on three-dimensional curved surfaces is achieved with a strategy that combines template-induced hydrodynamic printing and self-assembly of nanoparticles (NPs). Non-lithography flexible wall-shaped templates are replicated with microscale features by dicing a trench-shaped silicon wafer. Arising from the capillary pumped function between the template and curved substrates, NPs in the colloidal suspension self-assemble into close-packed micro/nanostructures without a gravity effect. Theoretical analysis with the lattice Boltzmann model reveals the fundamental principles of the hydrodynamic assembly process. Spiral linear structures achieved by two kinds of fluorescent NPs show non-interfering photoluminescence properties, while the waveguide and photoluminescence are confirmed in 3D curved space. The printed multiconstituent micro/nanostructures with single-NP resolution may serve as a general platform for optoelectronics beyond flat surfaces.