Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: polymer hosts for high-efficiency light-emitting diodes

A carbazole homopolymer and carbazole copolymers based on 9,9'-dialkyl-[3,3']-bicarbazolyl, 2,5-diphenyl-[1,3,4]-oxadiazole and 9,9-bis(4-[3,7-dimethyloctyloxy]phenyl)fluorene were synthesized and their electrical and photophysical properties were characterized with respect to their application as host in phosphorescent polymer light-emitting diodes. It is shown that the triplet energy of a polymer depends on the specific connections between its building blocks. Without changing the composition of the polymer, its triplet energy can be increased from 2.3 to 2.6 eV by changing the way in which the different building blocks are coupled together. For poly(9-vinylcarbazole) (PVK), a carbazole polymer often used as host for high-energy triplet emitters in polymer light-emitting diodes, a large hole-injection barrier of about 1 eV exists due to the low-lying HOMO level of PVK. For all carbazole polymers presented here, the HOMO levels are much closer to the Fermi level of a commonly used anode such as ITO and/or a commonly used hole-injection layer such as PEDOT:PSS. This makes high current densities and consequently high luminance levels possible at moderate applied voltages in polymer light-emitting diodes. A double-layer polymer light-emitting diode is constructed comprising a PEDOT:PSS layer as hole-injection layer and a carbazole-oxadiazole copolymer doped with a green triplet emitter as emissive layer that shows an efficacy of 23 cd/A independent of current density and light output.     

Efficient three-step sequence for the deamination of α-aminoesters. Application to the synthesis of CysLT1 antagonists

A practical and efficient three-step sequence for the deamination of α-aminoesters is reported. This method is based on the NaBH₄-mediated selective reduction of α-diazoesters to α-hydrazonoesters and has been successfully applied to the deamination of several representative α-aminoesters including some l-cysteine ethyl ester derivatives, key intermediates in the synthesis of a series of CysLT1 antagonists.     

Enantioselective [6pi]-photocyclization reaction of an acrylanilide mediated by a chiral host. Interplay between enantioselective ring closure and enantioselective protonation

The [6pi]-photocyclization of the anilides 1a and 5 was studied in the absence and in the presence of the enantiomerically pure chiral lactam 4. The relative configuration of the products was unambiguously established by single-crystal X-ray crystallography and by NMR spectroscopy. A significant enantiomeric excess was observed upon reaction of compound 1a to its photocyclization products at -55 degrees C employing lactam 4 as a chiral complexing agent in toluene as the solvent (66% yield). The trans product ent-3a was obtained in 57% ee, and the minor diastereoisomer (trans/cis = 73/27), cis product ent-2a, was obtained in 30% ee. DFT calculations were conducted modeling the complexation of intermediates 8 and ent-8 to host 4. In agreement with steric arguments concerning the conrotatory ring closure of 1a, the formation of ent-8 is favored leading to the more stable complex 4.ent-8 as compared to 4.8. Whereas the enantioselectivity in the photocyclization to trans compound ent-3a increased upon reduction in the reaction temperature, the enantiomeric excess in the formation of cis compound ent-2a went through a maximum at -15 degrees C (45% ee) and decreased at lower temperatures. Deuteration experiments conducted with the pentadeuterated analogue of 1a, d(5)-1a, revealed that the protonation of the intermediates 8 and ent-8 is influenced by chiral amide 4. In the formation of ent-3a/3a, both the enantioselective ring closure and the enantioselective protonation by amide 4 favor the observed (6aS,10aS)-configuration of the major enantiomer ent-3a. In the formation of ent-2a/2a, the enantioselective ring closure (and the subsequent diastereoselective protonation) favors the (6aR,10aS)-configuration that is found in compound 2a. Contrary to that, the enantioselective protonation by amide 4 shows a preference for ent-2a with the (6aS,10aR)-configuration.     

Reactivity of alkyl versus silyl peroxides. The consequences of 1, 2-silicon bridging on the epoxidation of alkenes with silyl hydroperoxides and bis(trialkylsilyl)peroxides

The bond dissociation energies for a series of silyl peroxides have been calculated at the G2 and CBS-Q levels of theory. A comparison is made with the O-O BDE of the corresponding dialkyl peroxides, and the effect of the O-O bond strength on the activation barrier for oxygen atom transfer is discussed. The O-O bond dissociation enthalpies (DeltaH(298)) for bis (trimethylsilyl) peroxide (1) and trimethylsilyl hydroperoxide (2) are 54.8 and 53.1 kcal/mol, respectively at the G2 (MP2) and CBS-Q levels of theory. The O-O bond dissociation energies computed at G2 and G2(MP2) levels for bis(tert-butyl) peroxide and tert-butyl hydroperoxide are 45.2 and 48.3 kcal/mol, respectively. The barrier height for 1,2-methyl migration from silicon to oxygen in trimethylsilyl hydroperoxide is 47.9 kcal/mol (MP4//MP2/6-31G). The activation energy for the oxidation of trimethylamine to its N-oxide by bis(trimethylsilyl) peroxide is 28.2 kcal/mol (B3LYP/6-311+G(3df,2p)// B3LYP/6-31G(d)). 1,2-Silicon bridging in the transition state for oxygen atom transfer to a nucleophilic amine results in a significant reduction in the barrier height. The barrier for the epoxidation of E-2-butene with bis(dimethyl(trifluoromethyl))silyl peroxide is 25.8 kcal/mol; a reduction of 7.5 kcal/mol relative to epoxidation with 1. The activation energy calculated for the epoxidation of E-2-butene with F(3)SiOOSiF(3) is reduced to only 2.2 kcal/mol reflecting the inductive effect of the electronegative fluorine atoms.     

H atom transfer along an ammonia chain: tunneling and mode selectivity in 7-hydroxyquinoline.(NH3)3

Excitation of the 7-hydroxyquinoline(NH(3))(3) [7HQ(NH(3))(3)] cluster to the S(1) (1)pi pi(*) state results in an O-H-->NH(3) hydrogen atom transfer (HAT) reaction. In order to investigate the entrance channel, the vibronic S(1)<-->S(0) spectra of the 7HQ.(NH(3))(3) and the d(2)-7DQ.(ND(3))(3) clusters have been studied by resonant two-photon ionization, UV-UV depletion and fluorescence techniques, and by ab initio calculations for the ground and excited states. For both isotopomers, the low-frequency part of the S(1)<--S(0) spectra is dominated by ammonia-wire deformation and stretching vibrations. Excitation of overtones or combinations of these modes above a threshold of 200-250 cm(-1) for 7HQ.(NH(3))(3) accelerates the HAT reaction by an order of magnitude or more. The d(2)-7DQ.(ND(3))(3) cluster exhibits a more gradual threshold from 300 to 650 cm(-1). For both isotopomers, intermolecular vibrational states above the threshold exhibit faster HAT rates than the intramolecular vibrations. The reactivity, isotope effects, and mode selectivity are interpreted in terms of H atom tunneling through a barrier along the O-H-->NH(3) coordinate. The barrier results from a conical intersection of the optically excited (1)pi pi(*) state with an optically dark (1)pi sigma(*) state. Excitation of the ammonia-wire stretching modes decreases both the quinoline-O-H...NH(3) distance and the energetic separation between the (1)pi pi(*) and (1)pi sigma(*) states, thereby increasing the H atom tunneling rate. The intramolecular vibrations change the H bond distance and modulate the (1)pi pi(*)<-->(1)pi sigma(*) interaction to a much smaller extent.     

An expedient synthesis of an isofervenulin analogue

An efficient approach has been developed for the synthesis of an isofervenulin analogue 1 employing a one‐pot condensation‐substitution reaction of a chlorocarboethoxytriazine (electrophile) with a urea (nucleophile). The resulting cyclization reaction resulted in the synthesis of a pyrimido‐heterocycle in good yield in either acidic or basic media. The former was assisted by utilizing trimethylsilyl chloride.     

A Chiral Thioxanthone as an Organocatalyst for Enantioselective [2+2] Photocycloaddition Reactions Induced by Visible Light

Thioxanthone 1 , which was synthesized in a concise fashion from methyl thiosalicylate, exhibits a significant absorption in the visible light region. It allows for an efficient enantioselective catalysis of intramolecular [2+2] photocycloaddition reactions presumably by triplet energy transfer.     

Enantioselective Template‐Directed [2+2] Photocycloadditions of Isoquinolones: Scope,Mechanism and Synthetic Applications

A strategy for the enantioselective [2+2] photocycloaddition of isoquinolones with alkenes is presented, in which the formation of a supramolecular complex between a chiral template and the substrate ensures high enantioface differentiation by shielding one face of the substrate. Fifteen different electron‐deficient alkenes and ten different substituted isoquinolones undergo efficient photocycloaddition, yielding the cyclobutane products in excellent yields and with outstanding regio‐, diastereo‐ and enantioselectivities (up to 99 % ee). The mechanism of the reaction is investigated by means of triplet sensitization/quenching and radical clock experiments, the results of which are consistent with the involvement of a triplet excited state and a 1,4‐biradical intermediate. The variety of functionalized cyclobutanes obtained using this approach can be further increased by straightforward synthetic transformations of the photoadducts, allowing rapid access to libraries of compounds for various applications.     

Application of the Tris(acetylacetonato)iron(III)/(II) Redox Couple in p‐Type Dye‐Sensitized Solar Cells

An electrolyte based on the tris(acetylacetonato)iron(III)/(II) redox couple ([Fe(acac)₃]^0/1?) was developed for p‐type dye‐sensitized solar cells (DSSCs). Introduction of a NiO blocking layer on the working electrode and the use of chenodeoxycholic acid in the electrolyte enhanced device performance by improving the photocurrent. Devices containing [Fe(acac)₃]^0/1? and a perylene–thiophene–triphenylamine sensitizer (PMI–6T–TPA) have the highest reported short‐circuit current (J_SC=7.65 mA cm^?2), and energy conversion efficiency (2.51 %) for p‐type DSSCs coupled with a fill factor of 0.51 and an open‐circuit voltage V_OC=645 mV. Measurement of the kinetics of dye regeneration by the redox mediator revealed that the process is diffusion limited as the dye‐regeneration rate constant (1.7×10⁸ M ^?1 s^?1) is very close to the maximum theoretical rate constant of 3.3×10⁸ M ^?1 s^?1. Consequently, a very high dye‐regeneration yield (>99 %) could be calculated for these devices.