Role of Impurity Precipitates on Microhardness of KBr:Ba2+ Crystals

Microhardness of KBr crystals doped with various concentration of Ba²⁺ have been investigated in the asgrown state and after quenching from various elevated temperatures. It is observed that hardness increases with increase in impurity concentration and at high concentration the hardness starts decreasing. Microstructural investigations have showed the formation of visible precipitates at high concentrations. The heat treatment studies showed that in crystals quenched from elevated temperatures the visible precipitates dissociate and hardness increases.     

Microhardness studies on some compound semiconductors

Vickers microhardness studies on some III–V and II–VI compound semiconductors have been made. The results showed that ZnS has the highest microhardness value. These results are compared with other properties of the crystals such as melting point, ionicity etc. Variation of microhardness with load was also studied on all the crystals. The results indicated that the hardness value increases at low loads. These results have been analysed by using resistance pressure model and interpreted.     

Dielectric and electrical studies on as-grown CeO2 films

Thin film capacitors of CeO₂ were fabricated by thermal evaporation. The dielectric properties of these films were studied in the frequency range 0.05–16 KHz at various temperatures, starting from liquid nitrogen temperature to 390 K. The effect of annealing on capacitance and tan δ were studied for different frequencies. The behaviour was explained on the basis of relief in strain energy. The plot between current density and temperature was drawn, and from the slope of the plot the activation energy was calculated and found to be 0.52 ev. The results were discussed.     

Electrical properties of Al-CeO2-Al thin film capacitor structures

Cerium Oxide films were prepared by vacuum thermal evaporation from tantalum boat in a conventional vacuum coating unit. Current-voltage characteristics were studied for different film thicknesses. The breakdown voltage (V_B) and dielectric field strength (E_B) were calculated. It is found that the breakdown voltage increases and dielectric field strength decreases as the thickness of the film increases. The applicability of Forlani-Minnaja relation is discussed. Current-voltage characteristics were also drawn at different temperatures and breakdown voltages were calculated. The breakdown voltage decreases as the temperature of the structure increases but the variation is nonlinear. The variation of current density with temperature was studied and the activation energy for the migration of charge carriers was calculated and it is about 0.52 ev. The results were discussed.     

Optical and fluorescence spectroscopy of Eu2O3-doped P2O5-K2O-KF-MO-Al2O3 (M = Mg, Sr and Ba) glasses

Fluorophosphate glasses of composition, P₂O₅ + K₂O + KF + MO + Al₂O₃ + xEu₂O₃ (M = Mg, Sr and Ba; x = 0.01, 0.05, 0.1, 1.0, 2.0, 4.0 and 6.0 mol%) were prepared and characterized their optical properties. Crystal-field (CF) analysis revealed a relatively weak CF strength around Eu³⁺ ions in the Ba based fluorophosphate glasses. The Judd-Ofelt parameters have been estimated from the oscillator strengths of ⁷F₀ → ⁵D₂, ⁷F₀ → ⁵D₄ and ⁷F₀ → ⁵L₆ absorption transitions of Eu³⁺ ions and were used to evaluate the radiative properties of the ⁵D₀ → ⁷F_J (J = 0-4) transitions. Considerable variation has been observed in the relative intensity ratio of ⁵D₀ → ⁷F₂ to ⁵D₀ → ⁷F₁ transitions of Eu³⁺ ions due to change in the alkaline earth metal ions. The decay of the ⁵D₀ level shows single exponential and less sensitive to Eu³⁺ ions concentration as well as MgO/SrO/BaO modifiers.     

Dynamics of semi-flexible tethered sheets

The dynamics of a semi-flexible sheet or tethered membrane in a solvent is studied using the method of stochastic rotation dynamics. Hydrodynamic interactions between different parts of the sheet are naturally included in this method. We confirm the scaling law for the radius of gyration versus sheet size predicted for a self-avoiding tethered membrane. The mean-square displacement shows both sub-diffusive and diffusive behavior similar to linear polymers. In the intermediate scattering function the sub-diffusive behavior appears as stretched exponential which we reproduce in our simulations. Thereby, we confirm an early prediction between the roughness and the sub-diffusion exponent derived from Zimm dynamics (E. Frey, D.R. Nelson, J. Phys. I 1, 1715 (1991)). Finally, we show that the diffusion coefficient of the square sheet is inversely proportional to the edge length of the sheet again in good agreement with theoretical predictions.     

Bandwidth packing problem with queueing delays: modelling and exact solution approach

In this paper we develop a general but smooth global optimization strategy for nonlinear multilevel programming problems with polyhedral constraints. At each decision level successive convex relaxations are applied over the non-convex terms in combination with a multi-parametric programming approach. The proposed algorithm reaches the approximate global optimum in a finite number of steps through the successive subdivision of the optimization variables that contribute to the non-convexity of the problem and partitioning of the parameter space. The method is implemented and tested for a variety of bilevel, trilevel and fifth level problems which have non-convexity formulation at their inner levels.     

Crystal growth,optical and thermal studies of nonlinear optical γ-glycine single crystal grown from lithium nitrate

Single crystals of the nonlinear material γ-glycine have been grown in the presence of lithium nitrate by slow-evaporation method. Structural characterization of the grown crystals was carried out by powder and single crystal X-ray diffraction (XRD) methods and it is observed that the samples crystallize in hexagonal system with non-centrosymmetric space groups. The modes of vibrations of different molecular groups present in glycine have been identified by spectral analyses. UV–visible transmittance study was performed to analyze optical transparency of γ-glycine crystals and found that the crystal was transparent in the entire visible-NIR region. Second harmonic generation (SHG) conversion efficiency has been estimated as 62 mV and the output power by the crystal was 1.72 times that of potassium dihydrogen phosphate (KDP) crystal. The thermal stability and decomposition of the sample have been studied by thermal analysis and it is observed that the γ-glycine crystal have good thermal stability.     

Crystal Engineering of Stable Temozolomide Cocrystals

The antitumor prodrug temozolomide (TMZ) decomposes in aqueous medium of pH≥7 but is relatively stable under acidic conditions. Pure TMZ is obtained as a white powder but turns pink and then brown, which is indicative of chemical degradation. Pharmaceutical cocrystals of TMZ were engineered with safe coformers such as oxalic acid, succinic acid, salicylic acid, d,l ‐malic acid, and d,l ‐tartaric acid, to stabilize the drug as a cocrystal. All cocrystals were characterized by powder X‐ray diffraction (PXRD), single crystal X‐ray diffraction, and FT‐IR as well as FT‐Raman spectroscopy. Temozolomide cocrystals with organic acids (pK_a 2–6) were found to be more stable than the reference drug under physiological conditions. The half‐life (T_1/2) of TMZ–oxalic and TMZ–salicylic acid measured by UV/Vis spectroscopy in pH 7 buffer is two times longer than that of TMZ (3.5 h and 3.6 h vs. 1.7 h); TMZ–succinic acid, TMZ–tartaric acid, and TMZ–malic acid also exhibited a longer half‐life (2.3, 2.5, and 2.8 h, respectively). Stability studies at 40 °C and 75 % relative humidity (ICH conditions) showed that hydrolytic degradation of temozolomide in the solid state started after one week, as determined by PXRD, whereas its cocrystals with succinic acid and oxalic acid were intact at 28 weeks, thus confirming the greater stability of cocrystals compared to the reference drug. The intrinsic dissolution rate (IDR) profile of TMZ–oxalic acid and TMZ–succinic acid cocrystals in buffer of pH 7 is comparable to that of temozolomide. Among the temozolomide cocrystals examined, those with succinic acid and oxalic acid exhibited both an improved stability and a comparable dissolution rate to the reference drug.     

采用金属有机骨架材料M(HBTC)(4,4'-bipy)·3DMF(M=Ni,Co,Zn)催化CO_2与环氧丙烷的环加成反应（英文）

采用溶剂热法合成了三种M(HBTC)(4,4’-bipy)·3DMF(M=Ni,Co,Zn,HBTC=1,3,5-均苯三甲酸,4,4’-bipy=4,4′-联吡啶)结构的支柱层金属有机骨架材料(MOFs).首次采用溶剂热和微波法合成了Zn(HBTC)(4,4’-bipy)·3DMF,并采用多种物理化学方法对其进行了表征.M(HBTC)(4,4’-bipy)·3DMF中包含有M2+离子的蜂窝网格层和BTC单元,BTC单元与4,4’-联吡啶柱进一步交联形成三维多孔骨架材料.在采用烷基铵卤化物作为助催化剂和无溶剂的条件下,所有MOFs材料均对催化固定CO_2与环氧化合物环加成制备环状碳酸酯反应表现出非常好的协同催化性能,其催化活性高低顺序为:ZnCoNi,这可通过酸-碱双功能特性进行解释.采用微波法合成的Zn(HBTC)(4,4’-bipy)·3DMF材料表现出与常规催化剂相似的物理化学性质和催化性能.考察了不同制备参数的影响和材料的重复使用性能,并提出了该反应的可能机理