Polarographic separation of cobalt from nickel

Summary The polarographic behaviour of nickel and cobalt in the mixed base electrolytes, urea-pyridine and urea-hydrazine has been studied. The effect of p_H, concentration of supporting electrolyte and the presence of various other ions was investigated. Well defined polarograms for both the elements were obtained at p_H 6.0 and 5.0 respectively. Attempts were made to utilize these observations in the separation of the two cations. While the difference in E _1/2 of the ions in urea-pyridine was greater than –0.3 volts that in urea-hydrazine was about –0.2 volts or slightly less even under the optimum conditions. In a mixed solution the waves for Co and Ni were therefore well developed and separated in the former base electrolyte. The polarograms in urea-hydrazine were, however, of little analytical use because of the washing away of the Ni wave due to the presence of even small amounts of cobalt.

---

Zusammenfassung Das polarographische Verhalten von Nickel und Kobalt in Harnstoff-Pyridin- und Harnstoff-Hydrazinlösung wurde untersucht und der Einfluß des p_H-Wertes, der Leitsalzkonzentration sowie der Gegenwart verschiedener anderer Ionen festgestellt. Bei p_H 6,0 bzw. 5,0 wurden für beide Elemente gut ausgebildete Polarogramme erhalten. Es wurde versucht, die erhaltenen Ergebnisse zur Trennung der beiden Ionen zu benutzen. In Harnstoff-Pyridinlösung beträgt der Unterschied der beiden Halbstufenpotentiale mehr als –0,3 V und man erhält gut ausgebildete und voneinander getrennte Stufen. In Harnstoff-Hydrazinlösung dagegen beträgt der Unterschied nur –0,2 V oder etwas weniger, selbst unter optimaler Bedingungen, und die Ni-Stufe wird schon durch kleine Kobaltmengen beeinträchtigt.

     

Crystal structure,Mössbauer,and magnetic behavior of mixed valence compounds in the BaFeS system: Ba3(Ba1−xAlx)Fe2S6[S1−y(S2)y]

The compounds $\text{Ba}{}_4\text{Fe}{}_2\text{S}{}_6\text{[S}{}_{\mathrm{<mtext>2</mtext><mtext>3</mtext>}}\text{(}\text{S}{}_2\text{)}{}_{\mathrm{<mtext>1</mtext><mtext>3</mtext>}}\text{]}$ and Ba_3.6Al_0.4Fe₂S₆[S_0.6(S₂)_0.4], designated I and II, were prepared by reacting BaS, Fe, and S powders and Al foils in graphite containers sealed in evacuated quartz ampoules at approximately 1100°C. The crystal structure of I was determined using 1682 independent, nonzero X-ray reflections, while 3589 were used for II. They are triclinic, $\text{A}\text{l}$:

$\text{a=9.002(2)}\text{A}\text{?}\text{,b=6.7086(8)}\text{A}\text{?}\text{,c=24.658(4)}\text{A}\text{?}\text{α91.49(2)°,}$

$\text{β=105.10(2)°y=90.74(2)°,ψ}{}_{\mathrm{calc}}\text{=4.15g/cm}{}^3\text{,for I:}$

$\text{a=8.993(6)}\text{A}\text{?}\text{,b=6.708(7)}\text{A}\text{?}\text{,c=24.70(1)}\text{A}\text{?}\text{α91.11(6)°,}$

$\text{β=105.04(6)°y=90.90(9)°,ψ}{}_{\mathrm{calc}}\text{=3.90g/cm}{}^3\text{,for II:}$

BaS₆ trigonal prisms share edges to form distorted hexagonal rings which form one-dimensional chains leaving two free lateral edges. The chains link in a stairstep manner with the rings offset along the [301] direction. These stairsteps join in a complicated manner to form a three-dimensional network. Fe ions are in two sites forming isolated FeS₄ tetrahedra and isolated Fe₂S₆ dimers by edge-sharing tetrahedra. The Al substitution occurs in the trigonal prisms which have free edges with Al replacing Ba. Room-temperature Mössbauer isomer shifts are 0.20 mm/sec. for I and 0.30 mm/sec for II. These data indicate that upon Al substitution charge compensation occurs by reducing Fe³⁺. Valence calculations indicate that Fe in edge-sharing tetrahedra are reduced while the Fe in the isolated tetrahedron remains unchanged. The effective charge distribution in the Al substituted compound is approximately Fe³⁺, Fe^2.5+ with electron delocalization across the shared edge. Room temperature electrical resistivity is 10⁵ ohm/cm. The compositions of the crystals are best represented by the formulas $\text{[}\text{Ba}{}_4\text{Fe}{}_2\text{S}{}_7\text{]}{}_{\mathrm{<mtext>2</mtext><mtext>3</mtext>}}\text{·[}\text{Ba}{}_4\text{Fe}{}_2\text{S}{}_6\text{(S}{}_2\text{)]}{}_{\mathrm{<mtext>1</mtext><mtext>3</mtext>}}$ and [Ba₃AlFe₂S₇]_0.4·[Ba₄Fe₂S₇]_0.2·[Ba₄Fe₂S₆(S₂)]_0.4. The replacement of a sulfide by a disulfide ion is thought to be strongly dependent on the sulfur activity during the preparation.     

Properties of molten carboxylates part 5. A quantitative differential thermal analysis study of mesophase formation in the sytems lead(II)dodecanoate/lead(II) oxide and lead(II)dodecanoate/hendecane

Measurements have been made of the temperatures and enthalpy changes of phase transitions in the systems lead dodecanoate/lead oxide and lead dodecanoate/hendecane. The data have been discussed in terms of the R theory of amphiphylic mesophases. The concepts of the R theory are shown to be useful in the interpretation of phase transitions in molten carboxylate systems.     

13C NMR coupling constants in delocalized organo-alkali metal compounds. Models of polymerization systems

2,5-Diphenyl-2,5-dipotassiohexane, 2-lithio-4,4-dimethyl-2-phenylpentane, and 1-lithio-2,5,5-trimethylhexene-2 have been prepared, all labelled with¹³C in the position adjacent to the alkali metal atom. The¹³C NMR spectra of these compounds have been measured and the¹³CC coupling constants found for the charged atom. The first two compounds have coupling constants consistent with an sp² hybridized C_α, with relatively little effect of the charge on the coupling constant. The third compound, when dissolved in either THF or benzene, gave much smaller coupling constants, which are more difficult to interpret.     

Comparison of figures of merit for fluorimetric analysis of rhodamine complexes of gallium and indium by excitation with pulsed laser and by xenon arc sources

Optimum conditions have been established for formation and extraction of indium-Rhodamine complexes, and limits of detection found for fluorimetric determination of gallium and indium by means of Rhodamine dyes, using the excitation with pulsed laser and xenon arc sources.     

The determination of pd,pt, au,ag and ir in copper by neutron activation analysis

The determination of palladium, platinum and gold in copper metal by neutron activation analysis is described. The matrix activity was separated from the noble metals by cation-exchange adsorption. Gold was extracted; palladium and platinum were precipitated. The precipitates were counted with a low-energy photon detector. The gold results were checked by instrumental neutron activation analysis. Silver, iridium, selenium, antimony and arsenic were also determined simultaneously.     

EPR studies of isotopic exchange involving adsorbed oxygen species on MgO

In the EPR spectra of ¹⁷O₂^? adsorbed on MgO, the hyperfine lines due to ¹⁷O(I = $\text{5}\text{2}$) have been used to monitor the isotopic exchange with gas phase oxygen. The predicted behaviour of the different possible mechanisms (place exchange and/or isotopic exchange) is compared with the experimental results which show that, on MgO at room temperature, isotopic exchange occurs via an intermediate species which is tentatively identified as O₄^?.     

Etude de la Fragmentation de Derives Substitues Polycycliques du Benzodioxinne-1,4

The mass spectra of five polycyclic 1,4 benzodioxin derivatives have been studied. The breakdown patterns of the more important ions have been suggested by comparison with three compounds in a deuterated specific position. Some rearrangements are produced by specific hydrogen migration and a few others after scrambling.     

Mechanism of vinyl chloride polymerization

An overall mechanistic scheme for the suspension polymerization of vinyl chloride is presented. The process can be resolved into five discrete stages, each of which presents a unique environment for the interaction of the systems parameters. It is shown that the surface area of the polymer formed during the reaction is not a major factor in autoacceleration and that the increase of kinetic chain length with conversion is due to a radical dilution effect. The latter is a direct result of the difference in rates between polymerization and radical formation, the former being greater. The increase of the initial polymerization rate and the reduction of autoacceleration brought about by chain transfer agents can be explained by the lower diffusion rate and greater bulkiness of the chain transfer agent radical relative to that of the monomer radical. The chaintransfer agent CBr₄ is preferentially absorbed by PVC from solution in vinyl chloride. With lauryl peroxide as initiator it is shown that the “hot spot” is the result of a build-up of initiator in the monomer caused by its exclusion from the polymer phase. Vinyl chloride was found to dissolve 0.03% PVC at ambient temperature and to have no effect on the decomposition rate of lauryl peroxide.